I had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
View 6 RepliesI just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies View RelatedI created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
View 2 Replies View RelatedI've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
I want to auto mount my ntfs partition using pysdm. However, it does not see it. When I do an fdisk -l it shows up. I can access the partition through my home folder... it just doesn't show up in pysdm. I have already tried to reinstall the program.
View 4 Replies View RelatedBut after installing Ubuntu from Wubi (From the .iso file) and I turn off my laptop, it doesn't show up in my Partition loader. It only shows Windows7 and thats it. Heres my laptop specs:
W7 Ultimate
Intel Core2 Duo P8400 @ 2.26GHz
4094 MB RAM
NVIDIA GeForce 9600M GS
ST9320320AS Seagate 320GB 2.5" SATA 3.0Gb/s Notebook Hard Drive
When I install F14 on my desktop, everything works 100%. I can open up the Add/Remove Software search for Thunderbird for example and install it. When I install F14 on my laptop (Dell D820), Thunderbird doesn't show up when I search, and when I look at the software sources, nothing is checked. When I try to enable it, it says could not contact fedora and it will be disabled. as to what is different between the two installs?
View 10 Replies View RelatedI reinstalled Debian today, and changed partition tables. Now I have 4 partitions, 3 of which are encrypted, including / (root). Everything was fine at first, but now, instead of the partition label I've chosen, I see this: 120 GB Unrecognized Everything works fine, I just don't understand what this is all about.
EDIT 1:I don't understand something else too, which might be related. First time, I didn't need to enter root password for things like Synaptic and so, is this somehow related? (Now I'm being asked for, like normal way)
EDIT 2: I know the label is ROOT, I used e2label. But it still doesn't show the right name...
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
i kept ubuntu cd into my laptop and then i restart my lap but it doesnt show anything ,again it shows my windows xp,i need to install ubuntu and i dont want delete xp,
View 1 Replies View Relatedp { margin-bottom: 0.08in; } I have been using a dual boot with Vista and Ubuntu 10.10 successfully some time now. Today my computer shut down unexpectedly when I in Vista. When I rebooted my Ubuntu partition had totally disappeared. I booted from a Ubuntu CD and the partition did not show under Places, and when I brought up the disk utility it didn't show there either. The Windows partition did show in both places. Below is the output from the boot_info_script. How to restore my missing partition.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for (,msdos5)/boot/grub.
sda1:
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/ntldr /NTDETECT.COM
Drive/Partition Info:
Drive: sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 1,465,127,999 1,465,127,937 7 HPFS/NTFS
blkid -c /dev/null:
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 DCD83195D8316F40 ntfs Windows Disk
/dev/sda: PTTYPE="dos"
"mount | grep ^/dev output:
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
When I download a game from the Ubuntu Software manager, it doesn't show up in the applications. Is there another place where the files are located? And how can I execute them? I am trying to run Mednafen
View 6 Replies View RelatedI have a dual-boot setup with Windows 7 and Ubuntu 11.04. Each OS is installed on a separate partition of one hard drive. I read that installing Windows after installing Ubuntu wipes out Grub, so I made sure to install Windows first. Unfortunately, after completing the Ubuntu install and rebooting, I see no sign of the Grub menu. I followed several sets of instructions for reinstalling Grub, and after running grub-update, it appears that Windows 7 was added to Grub, and after examining the grub.cfg file, it appeared that that was the case. Despite appearing to be installed perfectly once inside Ubuntu, Grub doesn't show anything at startup. No matter what I try, I can't seem to make Grub appear, and now I can't get back to Windows 7. Am I missing something, or should I try a different bootloader?
View 8 Replies View RelatedI upgraded from 10.10 netbook edition to 11.04 and something went wrong. After the grub menu I get the password window on that typical magenta screen with lights. Afterwards I get a message, that the netbook connected to the internet, but the Unity desktop doesnt show. Still the magenta desktop without anything. Already have tried to select the previous linux edition on the grub-menu, but no change.
View 1 Replies View RelatedThis is from Centos 5.5 so I apologize to anyone who may be offended.I installed my system and it came with kernel 2.6.18-194.el5. I installed the src.rpm of this kernel with rpm, patched, and built it. Then I did a yum -y install kernel.i686 which installed kernel-2.6.18-194.32.1.el5.centos.plus.src.rpm. Since this was a yum install, why doesn't this new kernel version show in the BUILD and SPEC directory?
View 1 Replies View RelatedAnyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
View 6 Replies View RelatedI have a computer with pentium 3 that i'd like to run ubuntu 10.04 on. I've installed it from a livecd (the cd is fine, because i used that cd to install 10.04 on another machine, and its working perfectly). The installation went fine, and on the first boot everything worked fine as well. but when i tried it again, the computer started but at the desktop there were no panels on the top or bottom, although every thing else was working.
I could use Alt+F2 to run any application that comes preinstalled on the ubuntu cd including the terminal, but i can't access Applications, Places, System, etc.
Everytime at startup during boot there is a message that prints "error: no suitable mode found" "error :unknown command 'terminal'" (without the quotes).
this computer has a bit of a history as i once tried to install linux mint on it but failed because of a bad livecd. the grub got installed wrongly, tried to reinstall xp, didn't work, then ultimately after trying a few other things turned to DBAN, which surprisingly also failed crashing everytime i ran it before completing its erase, which leads me to believe that Dban didn't leave my hard drives in too good a condition. when the ubuntu live cd worked however i was ignited with a brand new spark of hope, and even that now is starting to diminish, is there no hope for my pentium 3.
I went to install the 10.10 RC yesterday but to my surprise when I got to the partitioning stage it showed up my drive as being blank, with no existing partitions.
Has anybody else had this issue? I'm not sure what to do as I had the same issue on the beta, I just assumed it would be fixed.
I have a 500GB Sata HDD and i'm running an AMD64 processor so the RC was the amd_64 version.
Created partitions, some of them LVM, in a server, say A. Did the same for another server, B, but one more LVM partition.
Installed RHEL in A, and some other applications. Made dump files for each partition of A and restored them in B. No error in that process, except B won't boot. Did chroot /mnt/sysimage and grub-install /dev/sda--still no good. B came to a halt with GRUB> dispalyed. Gave up, and restored the bootloader part-- I say restored because now B boots ok and I can see application that I had installed in A. So far so good.
Problem: that extra LVM partition is missing! I did not knowingly overwrite it, so where did it go?
Is it the grub.conf that tells the OS what to mount and what not to? If yes, problem is , grub.conf is missing. In A, it is in /boot/grub/.
df -kh shows other partions (some of them LVM) just fine.. what is going on?
I tracked a file called menu.lst in a strange place, in /usr/share/doc/grub-0.97.. but I didn't see any entry that loads partitions.
how do i open preferences... also, when i installed the notebook edition,, it doesn't show my icons on the desktop.. :/
View 1 Replies View RelatedI'm trying to install kweather in 11.2. I have downloaded and installed. I can find it in usr/bin and usr/lib but I can't add an application as in 11 or 11.1. It doesn't show up in the list of apps. It's there but I can't get it on the desktop.
View 14 Replies View RelatedFedora 13...using yumex I installed everything for eclipse/CDT C/C++.
However when creating a new project, no option fpr C++ is shown.
Obviously Eclipse doesn't know CDT exists!
I want to eventually add Qt 4.6.2
Here is what I have:
I have a Sansa Clip + ,it works just fine in MSC mode. I wanted to give a try to the MTP mode. But it does not show up in Amarok. I have libmtp installed and mtp-detect does show up the device information.
View 6 Replies View RelatedI wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows
grub>
I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?
installed skype, shows in apps-internet-skype , but hwen i want to start it, it doesn't do anything. does not show in sysmonitor as running, or at all uninstalled and re-installed, still no luck anyone who got it working.
View 3 Replies View RelatedI have taken a break from using Fedora, but since getting my netbook Ive decided to dual boot with Windows 7 Started (warranty purposes) and Fedora 14 with Fedora as the default boot OS. Now Ive got my home network setup as follows:
Gaming laptop, Windows 7 Pro x64, external powered USB hub with 1.5TB HD with shared folders through windows share permissions and the HP Deskjet F2430 printer
Netbook 1, my wifes netbook, Windows 7 Starter, has 100% access to the windows shares and the printer.
Netbook 2, my netbook, Fedora 14 has windows shared folder access but no printer access. In Windows 7 Starter has access to windows shared folders and printer access.
All of them are wirelessly networked through my Linksys WRTG54GS thats flashed with DD-WRT Mega firmware. The only laptop that has a hardwired connection to the printer and HD is my gaming laptop. how to go about allowing this? My printer doesnt show up in the CUPS wizard.
I cant do anything with my desktop... It doesn't show any icons, it doesn't show any menu when I right click on it.. it's useless. I am new to Fedora 15 and GNOME 3
View 4 Replies View Related