Debian Installation :: Bootloader Doesn't Show After System Reboot
May 9, 2015
I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows
grub>
I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?
I m trying to use static ip address on debian. I followed a tutorial and I modified the /etc/networking/interfaces but every time I reboot I can't do anything because the nm-applet says that I have select a manually connection..
why the bootloader won't show up when I turn on the PC. The only things that come up with search results are 'Why ubuntu isn't on the boatloader' but my problem is is that the boot loader doesn't even SHOW UP.
Installation went completely fine, downloaded a version 10 32-bit iso file and then put in the folder with wibu and it asked me to restart. Restarted the PC, nothing came up so I thought you might have to restart again, restarted again, still no bootloader.
After looking in the 'Add/Remove Programs' of Windows it does say it's installed, so why the bootloader isn't showing up is rather mindbobbling.
i just installed Ubuntu from an ISO about a year old and of course i updated it to the latest version and when i get that screen at startup where i have a choice of which version to load i get something like this: My current version, memtest, an old installation of Ubuntu and some really old versions. The problem is i also have Windows7 and Vista installed(vista really needs to go) but i don't have either of them as a choice in the bootloader. How do i get it back? Also before the update i had it on the list.
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
I'm relatively new to Ubuntu, I've installed it in Virtual Box and through Wubi on other computers but this was the first time that I've done a live install on my production computer. I had problems from the get go, I was using a Live CD of 10.04 (64 bit AMD) to install it and when it got to the part about choosing a partition no drives would show up at all. Eventually after some searching around, I discovered that Using an Alternate install CD would work. I did that, installing Ubuntu into one of the free partitions I had set up prior to this. Eventually my system turned on but the monitor went to sleep so I had to hit E on the grubmenu and change something to nomodeset (or something like that) so that I could see the screen. I installed Compiz and it was all good from there.
Except for One issue, I cannot boot Into windows at all, it doesn't show up on the bootloader even though the partition shows up in Gparted. I've tried updating Grub2 with no results, here are the results of Sudo fdisk -l Disk /dev/sda: 400.1 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1549f232 .....
I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
I have a Debian testing system on a laptop that used to have Windows 8 on it. I kept the EFI boatloader and its partition, but now every time the system boots, it first tries to boot into Windows (which isn't there anymore). Removing /boot/efi/EFI/Microsoft just leads to an error message when booting, with some component of Windows still trying to load and not finding those files.
The workaround for now is to go into the UEFI boot menu on every boot and selecting the "debian" entry, which works but is a bit cumbersome.How can I get rid of the Microsoft loader completely? I find a lot about repairing or re-adding the Windows bootloader, but nothing about removing it.
Ubuntu system monitor applet doesn't show internet traffic although my wireless is working just fine. I use a conky to monitor bandwidth through vnstat and had no problem till I upgraded to maverick.
**ifconfig wlan0 Link encap:Ethernet HWaddr 00:24:d2:c4:3e:da inet adr:192.168.0.100 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::224:d2ff:fec4:3eda/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
I had installed ubuntu, then windows xp, surprise surprise I lost the boot loader for ubuntu. I have 2 different live boot cd's one for 9.10 and another for 10.04. My PC would be running 10.04, if I could install grub. When I go to help on the live boot disk menu, it tells me that rescuing a broken system is not enabled on either disk, though I downloaded a full copy of the disk when I downloaded it. What can I do to get grub back onto my computer? I deleted the XP partition hoping that would help. It didn't now the pc will only boot when I have the live boot cd.
I reinstalled Debian today, and changed partition tables. Now I have 4 partitions, 3 of which are encrypted, including / (root). Everything was fine at first, but now, instead of the partition label I've chosen, I see this: 120 GB Unrecognized Everything works fine, I just don't understand what this is all about.
EDIT 1:I don't understand something else too, which might be related. First time, I didn't need to enter root password for things like Synaptic and so, is this somehow related? (Now I'm being asked for, like normal way)
EDIT 2: I know the label is ROOT, I used e2label. But it still doesn't show the right name...
My laptop screen goes blank right after the bios is loaded. Live CDs have no effect either.I installed arch linux to my whole HDD today. Last time I installed ubuntu linux to my whole HDD, the same problem happened.The way I fixed the problem last time was by formatting the HDD with an internal HDD dock and then installing windows with linux dual boot.As I do not want to go through the hassle by installing windows again, and I would be very delighted if anyone had an alternate way. I really want my laptop to be windows free!It seems to me that my laptop is somehow constructed to crash / go blank if no windows partition / boot loader is detected. I have no idea why they would do that, maybe you have a better explanation?
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/une/.ssh/id_rsa
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
I use Lenny 2.6.26-1-686 and kde 3.5.10I installed scim/skim and a great load of related packages and some fonts. I changed a lot of configuration files, so many times that I'm at a loss about them right now. Skim is starting with kde, and an icon is showing at the lower right corner. If I press Alt+F2 to run another app though, this icon disappears. I configured skim at the meny "Main Toolbar Configuration" to "always show" [3]. So I can still configure it from this Toolbar that is always at the desktop. But I can't really use the programme.
Well, I'm trying to type romanized Pali fonts (Pali is the language of Buddhist scriptures).When I run openoffice, for instance, and try to select the "input method" there's only English/European; Raw Code; and Keyboard for alternatives.I created the file "/usr/share/m17n/sa-translit.mim" with a map for transliteration of the special characters. I learned how to do this here:The first thing I noted is that when I pasted the content of the file to the terminal, some characters appeared as "blank squares". So I guess my system can't find any fonts installed to print these characters. But I thought I had installed the fonts that supported them (Gentium, Dejavu Sans and others). I must be missing something.
At the K-Menu, if I go to "Settings" -> "SCIM Imput Method Setup" it doesn't work any more. No window opens. At first, when I was starting to try to make it work, I could open this setup window and the "sa-translit.mim" file was there under the "Other" category (but it didn't really work, I don't know why). Now this setup doesn't run anymore, and at the "Configure" window for Skim I have only "English/European" and "Raw Code" at "Global Setup"-> "Other".But I have many things at /usr/share/m17n/ which should be showing here, I guess.
My /etc/scim/global SupportedUnicodeLocales = en_GB.utf8 /DefaultPanelProgram = /usr/bin/scim-panel-kde
I just installed Fedora 12 on my HP laptop. And everthing has gone smooth, and I decided to reboot my machine. And it rebooted and the Fedora Loading logo camep and after it finished, it went to a black screen with a "|" just flashing and it's stuck on that
I had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
I just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
i kept ubuntu cd into my laptop and then i restart my lap but it doesnt show anything ,again it shows my windows xp,i need to install ubuntu and i dont want delete xp,
I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
I have a dual boot machine (Windows 7 and Debian). W7 and debian are on the same HD but on different partitions. The debian partition is an LVM encrypted one.
The W7 needs reinstalling, and as I understand the process will overwrite the debian bootloader (grub).
Question: Is there a way to save the current bootloader and recover it after I've reinstalled W7, so I wont have to reinstall debian from scratch?.
I plan to re-install W7 on the same partition it is now, without overwriting the debian partition.
I created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code: ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub. => Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
When I download a game from the Ubuntu Software manager, it doesn't show up in the applications. Is there another place where the files are located? And how can I execute them? I am trying to run Mednafen
I have a dual-boot setup with Windows 7 and Ubuntu 11.04. Each OS is installed on a separate partition of one hard drive. I read that installing Windows after installing Ubuntu wipes out Grub, so I made sure to install Windows first. Unfortunately, after completing the Ubuntu install and rebooting, I see no sign of the Grub menu. I followed several sets of instructions for reinstalling Grub, and after running grub-update, it appears that Windows 7 was added to Grub, and after examining the grub.cfg file, it appeared that that was the case. Despite appearing to be installed perfectly once inside Ubuntu, Grub doesn't show anything at startup. No matter what I try, I can't seem to make Grub appear, and now I can't get back to Windows 7. Am I missing something, or should I try a different bootloader?
I upgraded from 10.10 netbook edition to 11.04 and something went wrong. After the grub menu I get the password window on that typical magenta screen with lights. Afterwards I get a message, that the netbook connected to the internet, but the Unity desktop doesnt show. Still the magenta desktop without anything. Already have tried to select the previous linux edition on the grub-menu, but no change.
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
