Ubuntu Installation :: Installer Automatically Going To Wrong Hard Drive?
Apr 18, 2010
I'm running into a weird problem when trying to install from the live CD I'm running. Basically, I have two hard drives: sda, a 160GB HDD which has Windows 7 on it, and is the one I would like to put kubuntu on; and sdb, which is a plain 500GB NTFS file system I keep all my personal stuff on.When I get to 'disk setup' and choose 'install side-by-side', it defaults to sdb instead of sda and I can't change it. I've created a 20GB partition on sda, which is where I want to put kubuntu, but it still defaults to sdb. I also can't figure out how to install to where I want using the advanced partitioning menu.
View 3 Replies
ADVERTISEMENT
Sep 26, 2010
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
View 3 Replies
View Related
Jun 6, 2011
I have a HP Compaq 6710b notebook with W7 on it. I want to use Ubuntu for hobby activities, but as this is a company notebook, W7 should remain intact. I decided to install Ubuntu to an external drive.I set BIOS boot order to CD-USB-HDD.I attached a 2.5" 250GB WD Passport usb hard disk and installed Ubuntu to it from the CD.As a result, the clean install doesn't boot, I get a mere grub console (normal, not rescue).
Examining the situation I learned, that during Live CD session the inner hdd is hd0 and usb drive is hd1. Grub.cfg gets compiled to use /dev/sdb.When booting from usb drive, BIOS makes it to be hd0 and inner hdd becomes hd1 so grub tries to load kernel from W7 partition (and can't find it, I wonder why? )How to fix problem? Although grub.cfg is supposed not to be edited, may I change every sdb to sda in it?
View 3 Replies
View Related
Apr 18, 2009
I have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
View 14 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Jun 12, 2010
I selected the option to have my second hard drive automatically mounted during installation, and now I would like to undo that.
View 8 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
May 15, 2011
[URl]also I wonder why there is such a gap between the size of the files (7 GB) and their size on the disc (44 GB)
View 13 Replies
View Related
May 28, 2010
The other day a power outage affected an SSH server I have running 9.04 (32-bit desktop ed.). I have two external USB hard drives used for cron-scheduled backups (one for rsync, one for an incremental) that are connected at all times. When I reboot, they no longer mount automatically until I login to the gnome desktop. As far as I can remember, they always mounted automatically before as disk-1 and disk-2, but now I have to login to the gnome desktop and then log back out.
I never had them listed in the fstab before since they just worked, & hope to avoid doing it this way since the drives sometimes get their paths (sdd and sde) interchanged. However, is the best way to fix this to use UUIDs in fstab vs. using sde or sdd? (such as in this post: 4highlight=external+hard+drives+don't+mount+boot Or maybeust remembering incorrectly & ubuntu doesn't mount them automatically until login? Sometimes I have to reboot remotely, & this problem would cause the rsync to fill up my system drive.
View 2 Replies
View Related
Jun 5, 2010
I have two 1TB HDD's formatted in NTFS, one has windows and other stuff i use even on linux and the other is all media. i can mount them easy, but this is a minor annoyance because everytime i log in i must type in my password. is there no way to have them auto mounted on startup?
View 10 Replies
View Related
Mar 4, 2010
I'm running Ubuntu 9.10 64-bit.
For some reason, the second hard drive (sdb1) is not automatically mounted:
rick@rab-1:/mnt$ sudo fdisk -l
Disk /dev/sda: 500.0 GB, 499989348352 bytes
255 heads, 63 sectors/track, 60786 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000c17f6
[Code]....
Before I installed Ubuntu, I installed the RAID software to handle 4 500 GB hard drives - so there are supposed to be two mirrored drives. I'm not an expert in using RAID. I'm assuming it is correctly configured. I only "see" two drives. sda has Ubuntu etc. How can I get sdb1 mounted? I've tried using the palimpsest program but I'm afraid I screw it up. Do I need to re-format sdb1?
View 6 Replies
View Related
Nov 12, 2010
I was wondering if I can mount my second hard drive (/dev/sda4/) automatically on startup? Now I have to enter my password every time.
View 5 Replies
View Related
Mar 3, 2011
I have two hard drives in my computer, one for the operating system and the other solely for storage. They both have ext4 filesystems. Is there any way that i can have my storage hard drive to automatically mount on start up?
View 9 Replies
View Related
Sep 28, 2009
I have external USB hard drive of 320GB(seagate sata).It works fine but, it unmount automatically after some time.In windows it works fine without any problem. also I unplug USB cable & plug it again to mount it is there any other way of mounting it after it gets unmounted.
View 1 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
Sep 28, 2010
GNOME has an option "Spin down hard disks when possible"; is it ever possible? I'm using a netbook so I only have one drive and the operating system is on it. Is the operating system ever idle for more than a few seconds? If I spin down my SATA drive with sdparm it spins back up immediately. It's a 320GB 7200RPM drive; just wondering if I could save some battery life.
View 1 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Jan 21, 2010
I am attempting to install on a HP ML110 box. It has 2 SATA drives installed. From the live cd I can do fdisk -l and see both drives, I can see both from GPated but during the actual install it doesn't see any drives in which to install.
View 1 Replies
View Related
Feb 7, 2010
The Install program is failing to see the hard disk!
Now heres the really weird bit. The live cd can see the drive just fine.
I have created partitions using gparted and the disktool also sees the drive just fine but as soon as I go back to the installer it shows no hard disk!
It's a SATA drive which I suspect might be a part of the problem.
Is there a way I can install without the install program?
Is there a way to make the install program see the drive?
This is ubuntu 9.10 desktop.
View 2 Replies
View Related
Mar 30, 2010
I want to install ubuntu 9.10 DVD, I have the iso image, so i try to boot the installer from hard disk by adding this lines to my menu.lst.
Code:
title Install Ubuntu
kernel (hd0,0)/install-ubuntu/vmlinuz
[code]...
View 9 Replies
View Related
May 20, 2015
I'm trying to install jessie on a new computer, but the installer does not see the hard drives. I copied the DVD-1 iso to a usb stick with dd (also tried the netinstall) and it boots, but when I get to partitioning, it only sees the usb drive. If I go to another virtual console and run dmesg or fdisk -l, all drives are seen correctly.
Back up a little - at first I tried the on-board raid, but when the installer couldn't see the drives, I went back into the bios and reset the sata mode to ahci. I've got it set to use bios/legacy OS, or whatever it's called, fast boot is disabled. Even if only one drive is connected, the debian installer does not see it. Then I read up on the fake raid I was trying to use and decided to go with software raid. Can't do that if there's no hard drives listed in the partitioner.
My own installer (refractainstaller) does work, and I've installed jessie with it a couple of times onto one drive, but I really wanted to use raid and lvm, and my installer doesn't do either of those things. No optical drive, but if that's the only way to install, I'll pull the one from my current box and use it for the install. I think I still have a blank CD or DVD lying around.
Hardware:
ASUS H97-PLUS LGA 1150
Intel core i3 (the cheapest one at newegg)
WD Black 1TB drives (2)
GSkill cheap memory, which already passed a memtest.
View 4 Replies
View Related
Jan 24, 2010
I try to install Ubuntu on my new HTPC. I start Ubuntu with the Live CD and it boots fine. Then I want to start installing Ubuntu on my hard disk.Unfortunately the installer does not see my hard disk which has 1 empty ext4 partition. However, it can be seen and managed in GParted.
View 5 Replies
View Related
Sep 3, 2010
The Fedora installer won't display my two SATA hard drives. I've tried both the x86_64 live CD and DVD. On the live CD, fdisk -l displayed nothing. However, if I click "Specialized Storage Devices" a devices shows up as "BIOS RAID set (stripe)" with a capacity equal to both my hard drives. I don't even have RAID enabled in BIOS - it is set to AHCI. Other os installers display the hard drive correctly.
Specs:
2x 640GB western digital caviar blacks
ASUS M4A78T-E 790GX motherboard
View 2 Replies
View Related
Oct 12, 2010
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
View 1 Replies
View Related
Mar 10, 2011
Newbie to Linux Ubuntu 10.10. Got the installation done on the wrong disk, How can I move the partition or uninstall?
View 1 Replies
View Related
Jan 17, 2010
"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."
Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?
View 9 Replies
View Related
Dec 2, 2010
Each time, different methods, I get this about 3/4 of the way through:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.
Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?
View 6 Replies
View Related
Jan 6, 2010
I am trying to get a new box up. It has XP on one HDD. There is a second HDD, upon which I want to install Ubuntu and dual boot. My problem is that my CD drive is garbage and won't run the installer. Nor do I have any flash drives. Is it possible to install directly from Windows but not "within Windows" persay? If so, how is this done? (I do have Daemon Tools.)
View 2 Replies
View Related
Dec 16, 2010
I've been having some problems getting the Ubuntu (9.10 ?) installer to start on my desktop computer. I have created a bootable USB stick using usb-creator (from my laptop), and am able to boot from it on my laptop. However, I get a "Boot error" message on my desktop when I tell BIOS to boot from the USB stick.I'm not sure this is related, but I tried to boot the Ubuntu install CD from my external USB CD Drive, but nothing happened - it just proceeded to boot from my primary hard drive. I have enabled USB boot in the BIOS, but it doesn't list the USB stick as removable media. It lists as a hard disk drive instead. I can't find the external CD Drive on any of those lists.
(Also, the laptop is dual-booting and has grub installed. The desktop has a single OS - WinXP (and hence doesn't have grub installed).. I don't know how this should affect the USB boot though)(I don't think this is a problem with only the Ubuntu installer, but I'd like a confirmation on this)
View 4 Replies
View Related
Feb 21, 2010
I'm using the Ubuntu 9.10 alternate install CD in an external PATA USB CD drive to try to install Ubuntu on a ThinkPad X60. The installer boots but then very quickly gets to a stage where it complains that, "No Common CD-ROM drive was detected". It asks you to point out the drive or load or select drivers, but there aren't any drives or drivers to choose. I brought up another console, and looked in /dev, but there isn't anything there that resembles a CD drive.
I tried
$ modprobe ide-scsi
But it can't find the module.
I followed the instructions here, found the drivers on a working system, and put them on a thumbdrive. However, when I mount it:
$ mkdir /tmp/drive
$ mount /dev/sdc1 /tmp/drive
Mount fails due to an "invalid argument," with two different USB drives that work just fine on other systems. When even mount doesn't work, I feel like I've got both hands tied behind my back. How I can correctly implement the above command-line fixes? I'm not sure what I'm doing wrong. I've installed different Ubuntus probably a dozen times over the years, and haven't gotten stuck this badly since somewhere around version 4. Whether this problem is specifically related to the fact that my external USB CD drive has a PATA interface. If I go out and buy or borrow a SATA USB CD drive, is this problem likely to go away?
View 6 Replies
View Related
