Fedora Installation :: EIDE Hard Drive Recognized As Sda Hard Drive
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
i'm trying to install mint 8 on a new hard drive but my pc doesn't recognized it. neither does the live boot mint cd. when i get to create partition it just hangs there.do i need to format the new drive using my old one first?
I am trying to install this OS. However no matter what I do the UBUNTU instllation CD doesn't recognize the hard drive on which I would like to install the OS on.
I currently have two SATA hard drives connected to my computer. MY primary is my Windows 7 drive and my second hard drive is my spare.
When i load up UBUNTU and get to the window where I can select which hard drive/partition to install to my second spare drive isn't there.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I have a 2nd hard drive (500 GB) that I keep my media on. When I tried to access it, it wasn't showing up in places or even places > computer. I used system > administration > disk utility. On the left hand side it shows the drive listed with the type and model number. Right under that it shows 500 GB Hard Drive unrecognized unknown or unused. If possible I would like to recover the media on this drive. I had setup this drive as ext3 and had it mount /media/sdb1. I can go to /media/sdb1 in the file browser but nothing is there.
I had windows 7 installed on my machine and decided to go with a ubuntu win7 dual boot. The install went fine, but Ubuntu doesn't see my second HDD as anything but empty. My second HDD I set up in win7. It is actually two 320GB HDD striped together. It is holding alot of data that I would like to be able to access from both win7 and ubuntu.
When I run fdisk -l in the terminal I get: Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1c572ca .....
So Ubuntu sees the two HDD, just not as one with all my data on it like I see it in windows. Is there a way to set it up so I can use that second HDD (the two stripped) in both win7 and Ubuntu?
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I'm very new to Ubuntu. Now that I have it installed, my computer doesn't recognize my external hard drive or flash drive. How do I access my external hard drive and flash drive? I'm also trying to get Rosetta Stone to work using Wine, but having a heck of a time. I've searched the forums and have found some similar topics, but nothing that really helped me.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
I've been trying to get Fedora 11 (x86_64, netinst) installed on my machine, but am having trouble with the hard drive selection and partitioning. This machine has 2 x 320GB hard drives. One for Windows, and one for Linux of course.
When I first tried the install, both hard drives were attached to the computer. I was expecting to see the drives seperately so that I could partition and install on only one of the drives, but device mapper kicked in and showed me a single 640GB long partition. Not very helpful in my case.
I decided to simply unplug the Windows drive so that fedora didn't see the two identical drives and so would not try to map them. However, with only the linux drive plugged in, the installer doesn't see it. There are no hard drives to select from in the installer.
As a test, I plugged in the windows drive solely and unplugged the linux drive, and low-and-behold, fedora sees the windows drive. This is getting slightly confusing at this point as both the hard drives are identical. I can't see why the installer would recognise one but not the other. Yet it recognises the extra 320GB of hard drive space if both drives are plugged in and device mapper tries to raid them. I tried the debian installer to see if it had the same problem, but it was able to see and install on this drive. I would have tried OpenSUSE as well but this computer doesn't have a DVD drive.
I haven't tried a "nodmraid" boot option yet, so I am going to try that tonight, but I'm interested to hear what the community thinks of this problem.
System Specs:
DFI LANParty UT NF680i LT SLI-T2R Intel Q6600 Corsair XMS2-800 2x2GB 2 x Seagate Barracuda 320GB
I've also had a 640GB plugged in that was detected fine (probably because dm didn't try to raid it being the odd hdd out) but has been removed while I'm troubleshooting the fedora install.
There are 3 IDE drives in this box. hda has Debian Lenny installed (with swap) and is to remain. hdb1 has a linux distro on it. hdb2 is a data partition and is to remain. No other partitions on hdb. HDD is data only (not really relevant but mentioned for completeness) The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
I just bought a brand new hard drive, installed fedora with no errors. However when I try to click on the hard drive i get this errorunable to mount physical volume, not a mountable file system, ( I only have 1 hard drive and fedora boots up fine so its got to be working)I installed hardware browser and no hard drives come up
I installed Fedora 12 and it won't reboot from hard drive. It boots only from installation CD. I have motherboard MS 6163 and graphic card Nvidia TNT2 pro. Do I have to change something in BIOS setup? If I need to install another driver for NvidiaAnd, please tell me if some other Linux package is better for my hardware.
"Disk sda contains BIOS RAID metadata, but is not part of any recognized BIOS RAID sets. Ignoring disk sda" That's the message showing on the screen. I used to install the fedora 12 is no problem at all. And last time I see fedora 13 come out, then I want to try it. I also try my different destop, it also coming the same thing. don't know what happen? Could any one answer my question. This is my first time here.
I have Fedora 14 installed on my usb drive, works perfectly. What I would like to do is:- install Open Suse on the same drive, sharing the same swap, boot section but splitting or resizing the home partition, can this be done? I installed Fedora by booting up from a disc, plugging in my usb hard drive and then installing to that. Would I follow the same procedure for my 2nd installation, I think so but am open to correction. My laptop bios supports booting from disc and I have some 204 gig of free home space.
i'm going from 12 to 15. i have 1 drive with f12 and windows, another full of data. i'm replacing the f12/windows drive with a larger drive. i can temporarily install the new drive thru usb to copy data. and i can do a fresh install of f15 onto the new drive. is there an easy way to upgrade from f12 on one drive to f15 on another? one of the drives will be mounted thru usb.0
I've installed F10-live.iso onto a usb key but am having problems with the non-privileged user I created. When I login as kurt, I do not have access to my home directory on the hard drive. I tried [root@localhost home] #chmod kurt kurt (after cd-ing to the correct spot), but still cannot access my files there. I can do so as Live System User, but not as me.
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
I have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
I'm reasonably noob to Linux but now seriously confused Installing F11 onto a Dell Precision 490, 4GB RAM and 250GB WD2500YS. I get through to drive partitioning and there is no drive listed. Especially odd as the drive is running F10 quite happily. Reconnect a Seagate Barracuda 500GB and restart, this is seen and is the only drive listed even though it is SATA1 not SATA0. Boot the F10 installation DVD and that recognises both drives! I have tried both AHCI and ATA modes with the same results. Can anyone point me in the right direction or do I go out and get another Seagate drive, no I can't use the existing one.
Seen this posted several times, currently running F10 and cannot upgrade to F11 as it does not find the hard drive. AMD 64 SATA HDD Used these boot options: acpi=off pci=nomsi
I went through the Fedora 11 DVD setup process up to the partition screen, which does show my external SATA drive correct as; /dev/sda when connected by eSATA, but it shows the internal drive which is a standard IDE, as; /dev/sdf , when it should be as; sdb, why ? I did run that fdisk -l in a terminal from one of my other installed Linux, and it did show drives as correct, ( sda, sdb ). I think this may be a issue related to the digital media card reader built into this 2006 Gateway desktop computer being detected as drives like Windows does and assigns drive letters, or is this some bug in Fedora 11 ?
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x826d56f6
Device Boot Start End Blocks Id System /dev/sda1 * 1 26 208813+ 83 Linux /dev/sda2 27 1958 15518790 83 Linux
