Fedora Installation :: Dual Boot - Installer From F13 LiveCD Doesn't Detect Other OS - So Grub Conf Is Wrong
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
ADVERTISEMENT
Feb 16, 2011
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
View 9 Replies
View Related
Jul 8, 2009
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
View 2 Replies
View Related
Jan 4, 2011
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
View 9 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Dec 19, 2010
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies
View Related
Jan 3, 2011
I have just completed a clean install of Fedora 14 on a new disc (/dev/sdc)My old system disc (/dev/sda, an LVM 'vg_phenom00') is still installed.I note that my /etc/fstab has entries for the swap space on both disks;
Code:
# /etc/fstab
# Created by anaconda on Mon Jan 3 09:00:29 2011
[code]....
View 5 Replies
View Related
May 27, 2011
I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?
My /etc/grub.conf file in fedora is as follows:
Code:
View 2 Replies
View Related
Apr 14, 2009
I've installed Fedora 10 on the third partition of an external HDD. It has with the following partitions:
(hd0,0) - GRUB bootloader files [PRIMARY]
(hd0,1) - Chainload LILO for another Linux [PRIMARY]
(hd0,2) - Fedora 10, no LVM or Swap (labeled F10) [PRIMARY]
I'm trying to boot Fedora 10 using the following grub.conf:
[Code]....
View 3 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Mar 31, 2010
I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz
[code]....
View 4 Replies
View Related
Jul 12, 2010
I have a dual CPU Xeon machine that I have been using various versions of fedora on for years.
The machine has the following disk layout:
I currently have Fedora 10 and grub installed on hda and I had to jump through hoops to install such as disabling the promise controller and reassigning drives because that blasted /dev/mapper kept grabbing the Maxtor ATA drives although I didn't want it to.
Anyway, in the BIOS I can boot from the secondary IDE controller so I want to install Fedora 13 on hdb. Problem is, the Fedora installer won't detect the drive.
Its partition table is as follows:
There is approximately 69GB of free space on this disk but the blasted python based installer wont show the disk as a possible installation location. If I exit to a bash shell I see that the device nodes do exist and I can manually mount and manipulate the disk but the installer is brain dead where the disk is concerned.
I will mention that sdc, sdi, and sdj are used with mdadm to create high performance striped volumes. Also, sdc shows up under /dev/mapper and I don't want to use /dev/mapper at all. I want simple /dev/sd? mount points...no stinking /dev/mapper, and no stinkin volume manager wrappers...
Why I cannot get the installer to use /dev/sdb?
Is there a disk signature on /dev/hd[bc] that is causing them to be grabbed by /dev/mapper, and if so, how would I remove that signature from the drive? /dev/mapper is vacant under Fedora 10.
View 2 Replies
View Related
Oct 12, 2010
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
View 1 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
View Related
Aug 31, 2010
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies
View Related
Oct 1, 2010
I have win 7 and F13 installed on my computer but I am having trouble setting up dual boot so I can choose to boot F13 or win 7. I have tried to set up grub, how to install grub and set up a dual boot so I can use F13.
View 8 Replies
View Related
Feb 10, 2010
I have just suscribed into this forum. I have a problem: my notebook (NOTEBOOK SATELLITE L300-SP5917A - INTEL CORE 2 DUO T6400 (2.00 GHZ - 2 MB L2 - 800MHZ FSB) - 15.4 WIDESCREEN TRUBRITE TFT LCD - 400 GB SATA 2 .5 5400 RPM - 3GB PC2-6400 DDR2) doesn't boot ubuntu after the last security upgrade. I have wubi installed.I have Windows Vista and Ubuntu in the boot menu. I select "Ubuntu" and that leads me to the GRUB shell. I'm new in linux. It seems that GRUB doesn't detect the kernel. Maybe the file menu.lst has been deleted, or something similar, but I can't make my ubuntu to boot.
View 4 Replies
View Related
Jul 27, 2010
What is a better way to start a dual boot with Windows 7 and Ubuntu 10.04, Wubi or LiveCD?
View 9 Replies
View Related
Aug 22, 2010
I just tried setting my vga mode in grub.conf so that I can have my boot splash back after disabling nouveau. Works great. Problem is, now, that after doing this my touchpad is disabled. Anyone else run into this? I'm on an HP dv6, FC13, vga=0x37b. I remove vga mode setting and touchpad works again.
View 1 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Nov 6, 2009
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies
View Related
Jan 25, 2009
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
View 9 Replies
View Related
Dec 20, 2010
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies
View Related
May 18, 2011
I have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
View 2 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Jan 29, 2011
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies
View Related
Dec 23, 2010
after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
View 2 Replies
View Related
Feb 18, 2010
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
View 4 Replies
View Related
Jan 20, 2009
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
View 4 Replies
View Related
