General :: Partition And Installation On Wrong Hard Disk
Mar 10, 2011Newbie to Linux Ubuntu 10.10. Got the installation done on the wrong disk, How can I move the partition or uninstall?
View 1 Replies
ADVERTISEMENT
Fedora Installation :: Partition Hard Disk Using GParted
Dec 6, 2010HP Netbook Mini 210
F14 xfce
I installed F14 xfce and using the entire disk.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 97G 4.0G 92G 5% /
tmpfs 494M 212K 494M 1% /dev/shm
/dev/sda1 485M 49M 211M 11% /boot
/dev/sda4 193G 8.5G 175G 5% /home
After I have installed all my programs, I need to install windows and I need visual studio. So I was thinking of taking 20 GB from the /home directory and using that for windows. I can use gparted. However, many posters on here think it is best to use gparted by booting from the disk. However, I cannot do this, as I don't have any DVD drivers. And I can't really afford to buy one just for this reason. What is the best way to do this?
Ubuntu Installation :: Partition When Hard Disk Is In Format?
May 20, 2011This is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
Debian Installation :: Hard Disk Partition For Samba Server
Nov 27, 2014I have just install debian-7.7.0-i386 on my home pc. I want to configure samba 4 in my Debian box. How may I create Hard Disk partition of 500 GB for a samba server. The professional way i want.
View 3 Replies View RelatedUbuntu Installation :: Partition Second Hard Disk For Use As Backup Data
Sep 29, 2010My primary drive is 250GB and has the root, home and var (I'd read it's good to put var on a separate partition for MythTV which I'm planning on doing) on separate partitions. I have a second 1TB drive that I'll be using to backup the 250GB drive and also host less critical data. I've created two partitions on this drive, one 250GB and the other covering the rest of the drive. I'd like to move the Videos directory out of Home on the 250GB onto the 1TB drive but can't find a definitive way of doing this. Should I just follow this guide for moving the home folder to a new partition? Next question is when performing a backup of the 250GB drive how do I make sure it's going to the 250GB partition on the 1TB drive? Can the different partitions be mounted separately?
View 2 Replies View RelatedFedora Installation :: Recommendation (e.g. Size) For Hard Disk Partition Allocation?
Nov 4, 2010I want to add Fedora 14 to my triplecore 3GB RAM computer which has windows, Fedora 12 & ubuntu installed. What are the recommendation (e.g. size) for harddisk partition allocation? I can reuse the swap partition, can't I? Should I install Fedora 14 to a single partition (ie. /)? Should I use only ext4?
[Code]...
General :: 1TB Hard Disk Partition - Device Not Created
Apr 30, 2010I have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
General :: CentOS 5 - Custom Hard Disk Partition?
Mar 3, 2011I want to install Cent OS5 on my machine. The Hard Disk is SATA. I want to discuss about how to custom partition the hard disk. In the old version there is a drop down list for manual partition the hard disk. like /,boot,swap,var etc etc. In the new version of centos 5 I can not see things like that. During installation process and in partition page there are things like:
Code:
Remove all partitions on selected drives and create default layout.
Remove Linux partitions on selected drives and create default layout.
Use free space on selected drives and create default layout.
Create custom layout.
When I choose custom layout it show me an error message. "An error has occurred-no invalid devices were found on which to create new files system. Please check your hardware for the cause of this problem."
General :: Windows - Match Hard Disk Partition Table?
Mar 15, 2010What is the most efficient way to match the partition tables on two different hard disks?
I have saved the partition tables using dd command in linux.
The partition tables are from a Windows system.
General :: Copy DVD ISO To Empty Hard Disk / Partition And Boot As If It Is A DVD?
Sep 10, 2011I have a broken DVD drive and no others available right now to burn a DVD iso to so I'd like to use a empty hard disk instead.
I've tried Unetbootin but that only copies a few megabytes of files - the rest of the image data in the ISO is ignored.
I have verified the ISO is valid and working with VirtualBox. It's MD5 hash is also as expected. But I need to boot at the real bios not an emulated one.
I've also tried things like:
sudo cat /disk/image.iso > /dev/sdb1
and that got "Permission denied" -
General :: Bootable Partition Start From Sector 1 On Hard Disk?
Dec 20, 2010Should the first bootable partition start from sector 1 on a hard disk? or Can it be created anywhere on the disk? I am using fdisk to create the bootable partition.
View 2 Replies View RelatedUbuntu :: Disk Space Is Wrong On Root Partition?
Jan 15, 2010My root partition seems to be full bur is wrong because I have a partition with 15Gb space and the data is arround 7.5Gb I have:
Quote:
~$
PHP Code:
sudo df -lha
S.ficheros Tama�o Usado Disp Uso% Montado en
/dev/sda5 15G 14G 660M 96% /
proc 0 0 0 - /proc
/sys 0 0 0 - /sys
[code]....
When I look for specific info about what is taking the space using du command I get that the space used by the root system is 7.2Gb. I get to the same conclusion when checking the space with Nautilus.
Software :: Resize A Partition On An IDE Hard Disk To Use The Entire Disk?
Jan 7, 2009I'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
Ubuntu Installation :: Copy Hard Disk Have 10.04 And Ext4 To 1000 Hard Disk?
Sep 23, 2010I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedFedora Servers :: How To Use Fdisk To Partition Hard Disk Into Two Partition
Jul 2, 2011i had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies View RelatedGeneral :: Changing GRUB From An External Hard Disk To The Internal Hard Disk?
May 14, 2010I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedGeneral :: Use Hard Disk Image Like A Regular Hard Disk?
Apr 6, 2010If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
Hardware :: Hard Disk Partition Out Of Space?
Dec 14, 2010have Debian "testing" installed. During the installation I selected to have a separate /home partition. / partition is ~10Gb, and my /home is ~300Gb. I didn't think I would need more than 10 for /.The other night, Debian informed me that I had 0 bytes remaining on /. I purged /temp an went about my day, only to be greeted with the message again the next morning.I've tried shrinking /home and increasing / via an Ubuntu live CD with GParted, but for some reason it did not want to work. However, I am beginning to suspect that my /home folder is occupying the / partition, and not the separate /home partition.Output of fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1216 9764864 83 Linux
/dev/sda2 1216 38914 302803969 5 Extended
/dev/sda5 1216 1974 6082560 82 Linux swap / Solaris
/dev/sda6 1974 38914 296720384 83 Linux
Red Hat :: Extra New Partition On Hard Disk To Mount VAR
Mar 5, 2010On my embedded linux box, running on Linux Kernel 2.6.9 embedded with BusyBox utilities.
An Objective are follow:
1/ To figure out how many partitions are on the hard disk
2/ Create a extra partition about 10GB size on the hard disk
3/ Format the partition and mount var on that partition
Only utility to perform above operations I have "sfdisk" utility from BusyBox collection. Which get installed at the time of image flash in to ROM (8mb ROM size). The following is the root directory structure where hdd as a directory mounted /mnt/hdd1
Code:
~ > ls
bin etc lib proc sbin sys var
dev hdd mnt root share tmp var_init
Within /bin sfdisk utility can be used which I tried but no avail.
Code:
~ > sfdisk -l /dev/hda
/dev/hda: No such file or directory
sfdisk: cannot open /dev/hda for reading
~ > sfdisk -l /dev/sda0
/dev/sda0: No such file or directory .....
Ubuntu :: Partition Hard Disk From Live CD
Sep 28, 2010When I installed Lucid several months ago, I went ahead and let Ubuntu use the entire disk. Since then I have learned more about partitions and came to realize that I didn't have a separate /home partition, meaning that clean installs of new Ubuntu releases would wipe my data. I would like to carve my hard drive up from the LiveCD environment while preserving my current data and Lucid installation.
View 3 Replies View RelatedCentOS 5 :: Selecting The Hard Disk Partition?
Apr 2, 2009i have Cent OS 5.2 CD (6) with me. I need to install it in my hard disk. I have already installed Windows XP in C: partition. I need to install Cent OS in D: partition. During installation process its asking for hard disk partition. In this regard, how to select the partition. I have C,D,E and F partitions and C,E and F are in common use. So i have to install Cent OS in D partition.
View 3 Replies View RelatedGeneral :: Unable To Access / After Installation On New Hard Disk
Feb 18, 2010I had very recently installed a new hard drive on my laptop. After installation, I tried to install linux from the CD and followed the instructions. I did not create a partition in the hard drive and carried out the installation procedure. After installation, i tried to start but it would not start...and shows error. I am not sure what I should do ...please instruct me in a step by step procedure to solve the problem
View 1 Replies View RelatedUbuntu :: Increase Hard Disk Space For Partition?
Oct 1, 2010My computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View RelatedSoftware :: Possible To Boot From Hard Disk Having RAID Partition?
Mar 28, 2010I wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?
View 1 Replies View RelatedRed Hat :: Hard Disk Partition Size To Create Name Server
Jan 24, 2011I want to configure Name Server i.e., DNS to my red hat linux box in a production enviromnt.The ram is 2 GB and Hard Disk size is 200 GB. How much space should I give /var, /usr, /boot, /root and home partition. May be I am wrong in partition point of view while installing fresh red hat but to install for home purpose and server end is different. So kindly guide me the hard disk partition size to ready it for name server.
View 3 Replies View RelatedGeneral :: Dual Boot Installation - Cannot Load From Hard Disk
Mar 19, 2010I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
General :: Sata Hard Disk Not Detected While Installation Of Ubuntu?
Mar 29, 2010i'm using athlon 64 bit , asus a8vmx mbd, 1gb ram
View 3 Replies View RelatedGeneral :: Mount From The Old Hard Disk To The New Hard Disk
Jun 30, 2010mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedUbuntu :: Keep Getting Messages No More Hard Disk Space In Partition Is Almost Full
Mar 17, 2011I set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 Replies View RelatedUbuntu :: Corrupted Partition On Hard Disk - Invalid Argument
May 11, 2011Basically, I just installed Ubuntu over Windows Vista because I was getting fed up with the performance on it. During install I set up a partition, one for Ubuntu and one for data. However, my second, larger partition gives this error when I try to mount it...
Error mounting: mount exited with exit code 12: Failed to read last sector (976764927): Invalid argument
Hints: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?