Ubuntu Installation :: Installer Boots From CD Then Cannot Detect Drive
Feb 21, 2010
I'm using the Ubuntu 9.10 alternate install CD in an external PATA USB CD drive to try to install Ubuntu on a ThinkPad X60. The installer boots but then very quickly gets to a stage where it complains that, "No Common CD-ROM drive was detected". It asks you to point out the drive or load or select drivers, but there aren't any drives or drivers to choose. I brought up another console, and looked in /dev, but there isn't anything there that resembles a CD drive.
I tried
$ modprobe ide-scsi
But it can't find the module.
I followed the instructions here, found the drivers on a working system, and put them on a thumbdrive. However, when I mount it:
$ mkdir /tmp/drive
$ mount /dev/sdc1 /tmp/drive
Mount fails due to an "invalid argument," with two different USB drives that work just fine on other systems. When even mount doesn't work, I feel like I've got both hands tied behind my back. How I can correctly implement the above command-line fixes? I'm not sure what I'm doing wrong. I've installed different Ubuntus probably a dozen times over the years, and haven't gotten stuck this badly since somewhere around version 4. Whether this problem is specifically related to the fact that my external USB CD drive has a PATA interface. If I go out and buy or borrow a SATA USB CD drive, is this problem likely to go away?
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options: 1. Configure iSCSI volumes 2. Undo changes to partitions 3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
It's my first time trying to install Ubuntu. My problem is that booting from USB stick or trying to run "install to drive" both result in a black screen. Here are my specs:
Ubuntu 10.10 64-bit deployed to USB stick using Universal USB Installer 1.8.2.2.Searching around seems the problem is the way Nvidia graphics card is handled. I found a recommendation to set 'nosetmode' option, but found no easy way to do this on the current USB boot menu.Currently tried pressing TAB on the boot menu option and adding '--nosetmode' to command line, but result is the same.Does anyone have any suggestion about what I should try next?
I have Mint 9 installed on a 120GB, WD SATA HDD. Now I want to install Ubuntu 10.10 on this HDD. Downloaded i386 desktop image and created a bootable USB stick with the image. System boots fine but installer do not detect My HDD. It only lists my USB drive. Even Gparted donot detect the drive. Typing sudo fdisk -l also lists only my USB Drive.
Ubuntu installer does not detect my sata drive during installation.
Hardware: Asus p4gv-mx 4gb ram 250gb wd sataII drive ide cdrom Bios options tried: Disabling apci 2.0 disabling apci
setting IDE mode to [Enhanced] [compatibility] w/both sata only, pata& sata settings Setting my pata cdrom to slave and plugging it into the slave position of the ide ribbon.
I've tried these combinations with the usb installer, and dvd installer. I've tried loading the live cd/dvd & usb then running the installer with in. I've tried the spacebar method, hitting f6 and apci=no, noapci
The live cd has no problems detecting and mounting my hdd, however the installer does not detect it.
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
I have a Dell Poweredge 2970 2x3.0 GHz AMD 64bit dual core, Perc 5/i controller, and 2 brand new Fujitso SAS 15K 146GB drives.
Trying to install Ubuntu 10.04 Server 64 bit from USB. At the point of detecting disks, the installer only recognizes the USB. The installation was created using Pendriveinstaller ver1.8.0.1 per Ubuntu Server web site instructions. I have the drives configured as 2 separate raid 0 arrays using the bios raid configurator. The drives have been initialized. (Tried before with a single Raid 1 array, but had same issue and since have read Ubuntu support for hardware raid is not great, so was going to bypass hardware raid for now).
I've seen some chatter on here about opening a terminal at this point and removing dmraid but don't see an option for terminal only shell.
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I have a dual CPU Xeon machine that I have been using various versions of fedora on for years.
The machine has the following disk layout:
I currently have Fedora 10 and grub installed on hda and I had to jump through hoops to install such as disabling the promise controller and reassigning drives because that blasted /dev/mapper kept grabbing the Maxtor ATA drives although I didn't want it to.
Anyway, in the BIOS I can boot from the secondary IDE controller so I want to install Fedora 13 on hdb. Problem is, the Fedora installer won't detect the drive.
Its partition table is as follows:
There is approximately 69GB of free space on this disk but the blasted python based installer wont show the disk as a possible installation location. If I exit to a bash shell I see that the device nodes do exist and I can manually mount and manipulate the disk but the installer is brain dead where the disk is concerned.
I will mention that sdc, sdi, and sdj are used with mdadm to create high performance striped volumes. Also, sdc shows up under /dev/mapper and I don't want to use /dev/mapper at all. I want simple /dev/sd? mount points...no stinking /dev/mapper, and no stinkin volume manager wrappers...
Why I cannot get the installer to use /dev/sdb?
Is there a disk signature on /dev/hd[bc] that is causing them to be grabbed by /dev/mapper, and if so, how would I remove that signature from the drive? /dev/mapper is vacant under Fedora 10.
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
I'm trying to install Debian Jessie beta2 on a UEFI laptop. The installation worked just fine before with setting in manual partitioning an EFI system partition and a root partition.But when I try to partition with root as an encrypted volume I get this error when I wanna write changes to disk:" the attempt to mount a file system with type vfat in scsi1 partition sda at /boot/efi failed"When I choose resume partitioning the installer then freezes at "detect file systems".
Because my harddrive needs specific alignment I've made beforehand in gdisk:EFI System Partition of 100mib at /dev/sda1/boot partition of 512mib at /dev/sda2/ (because I expect the installer to want a /boot too for an encrypted device)rest of harddrive reserved for root at /dev/sda3
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
The BIOS boots the RHEL5 off of either my BluRay writer or my DVD writer, but when RHEL 5 gets to identifing the optical disk for it self it says it can see it. Ask to pick a driver that is on the list. Of course there is nothing on the list that works, as I have gone through the entire list first from the BluRay and then from the DVD writer.
When I install either Suse 11.2 or Ubuntu 9.10 both can see and can use either the BluRay or the DVD writer
I'm trying to install v10.10 on my Sony Vaio VGN-NS150J, 4gb ram, 2gb core 2 duo, 320 gb HD...to no avail. The live CD boots, but the dvd drive stops spinning after i click the install button...the one that says i can't turn back. Nothing seems affected by quitting the install. I have no idea what to do except to not turn back to VistaOS. I intensely dislike that "operating system".
I am trying to get a new box up. It has XP on one HDD. There is a second HDD, upon which I want to install Ubuntu and dual boot. My problem is that my CD drive is garbage and won't run the installer. Nor do I have any flash drives. Is it possible to install directly from Windows but not "within Windows" persay? If so, how is this done? (I do have Daemon Tools.)
I've been having some problems getting the Ubuntu (9.10 ?) installer to start on my desktop computer. I have created a bootable USB stick using usb-creator (from my laptop), and am able to boot from it on my laptop. However, I get a "Boot error" message on my desktop when I tell BIOS to boot from the USB stick.I'm not sure this is related, but I tried to boot the Ubuntu install CD from my external USB CD Drive, but nothing happened - it just proceeded to boot from my primary hard drive. I have enabled USB boot in the BIOS, but it doesn't list the USB stick as removable media. It lists as a hard disk drive instead. I can't find the external CD Drive on any of those lists.
(Also, the laptop is dual-booting and has grub installed. The desktop has a single OS - WinXP (and hence doesn't have grub installed).. I don't know how this should affect the USB boot though)(I don't think this is a problem with only the Ubuntu installer, but I'd like a confirmation on this)
20GB Laptop HDD in external enclosure with USB interface. Formatted FAT32. Shows up in Windows as E:. The Universal USB Installer, however does not see the drive. Is that app only set to look for a true USB flash drive and I'm just doing it wrong?
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
rescuing my machine after an unfortunate incident with what I assume is a faulty thumbdrive.The other day I bought a used HP 2140 netbook; which had a 1.6GHz single core Atom, 2G mem and a tiny little harddrive. I got it home, put my ssd in it, and within an hour had a nice clean ubuntu netbook edition installed on it. And everything was joy, mostly, for a couple days. But Netbook edition was not as fast as expected, and I wanted to try another distribution. So I put Xubuntu on a new thumbdrive, and tried to install it. Some time during the file copying process, it stalled. I left it on overnight, then turned it off.
I've tried a few distribution iso's; Ubuntu desktop, xubuntu, linux mint. Same thing every time: Installation hangs after clicking next at the screen that checks for specs, space and online status. I can boot from another thumb drive with little trouble, but cannot install from there either. I've tried running GParted, but running it from the meny leads to it crashing. Running it from the terminal still crashes; running it with 'sudo gparted /dev/sda' it runs, and from here I can do most things; I can remove and create partitions, and format to my hearts content. But trying to change flags brings up this error: 'Failed to mount "Uden Navn" The enclosing drive for the volume is locked'. When I close that popup, this comes up in the terminal: 'udevadm settle is not permittet while udev is unconfigured'
I understand that the drive could be locked somehow because of the crash. So I took it out, connected it to another machine, removed the partitions and changed to a guid partition table, and made absolutely certain that the drive had finished ejecting before disconnecting it. Nothing. I tried another harddrive: Nothing I've reset and flashed the bios: Both nothing. I've tried updating GParted; it tells me I have the current version. I've let Xubuntu run thru its updating process from the thumbdrive, and even though it gives me a couple errors underway, it gets thru. But it doesn't help
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
I'm trying to install Ubuntu Server from a USB drive. I can boot into the drive but when I'm trying to do an install I get a "can't detect CD-ROM" error. Does anyone know how I can get past this?
I am attempting to install 10.10 over my 9.10 installation, but the installer says I don't have the required 2.6GB of free drive space. This problem only occurs with my 120GB SATA drive. If I plug in my old 80GB ATA drive (in a USB enclosure), there's no problem and I'm able to get past the installer's 3-point checklist.This is the first time I've encountered a problem like this and it seems as if no one else has encountered it yet. I can therefore not find this topic on any Linux forum, so I'm quite out in the cold.
I'm running into a weird problem when trying to install from the live CD I'm running. Basically, I have two hard drives: sda, a 160GB HDD which has Windows 7 on it, and is the one I would like to put kubuntu on; and sdb, which is a plain 500GB NTFS file system I keep all my personal stuff on.When I get to 'disk setup' and choose 'install side-by-side', it defaults to sdb instead of sda and I can't change it. I've created a 20GB partition on sda, which is where I want to put kubuntu, but it still defaults to sdb. I also can't figure out how to install to where I want using the advanced partitioning menu.
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
