Ubuntu Installation :: Installer Encountered An Eror Copying Files To The Hard Disk
Jan 17, 2010
"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."
Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?
Each time, different methods, I get this about 3/4 of the way through:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.
Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?
I have about 170 Gigabyte free at the last of my hard. I have windows 7 and suse linux installed on the machine. When I try to install ubunto. I start to create the partitions manually because I want to add it as a third operating system on my PC. Anyway I create the 4 partitions /boot - / - /var - /home. Automatically it choose to install the boot on sda not sda 9 as the /boot was sda9. I click install.
It gives me this message "The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment." I burn another cd and do the same ... the same problem.
I try to create the partitions at the end of the hard disk not the beginning although I am sure that there is no error in the hardware but the same message. Lastly I change the boot to be created in sda 9. The same problem, when I do everything. I download Linux mint another operating system and do the same points. The same error message appeared by the way the boot is being damaged after restarting and I have to fix it from suse linux cd.
I have an Asus eee 1000. Was running Ubuntu 10.04 netbook remix quite happily for some months until recently when I had some problems and decided to reinstall. Unfortunately that is when my real problems began. I have tried using various CD.s with Ubuntu 10.04 desktop and Ubuntu 10.04 Netbook remix.
Both give the same error - The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I tried using an SD card to install - that also gave errors. I tried installing Windows as much as I hate it and, annoyingly, that installed without any problems whatsoever. Then I tried using the Alternate Install disc. That gave me a different error - did everything and apparently installed a "basic" system but failed to install software. Struggled to find an answer to that. How I can get Ubuntu 10.04 back on my netbook. As it stands at the moment I am rapidly coming to the conclusion that I will have to install Windows or buy a new netbook - this seems preposterous!
I have seen that many people have this error and so it seems like some sort of bug. The only clue I had is that I did succeed in installing Ubuntu on my second 32 GB SD (the netbook has two (an 8 GB and a 32 GB). Unfortunately this SD appears much slower than the first so I erased it and went back to trying to get it on the 8 GB as before. Now it won't install on either - gives the same error. I do not believe that both my SD.s can be faulty and so I can only assume that somehow they both need erasing or formatting or something before I can reinstall.
I've set up my parents' machine running KDE 4.5 and want them to use the Gwenview import function from the Device Manager popup when transferring image files off photo CDs or other inserted media, since it's the easiest method for them to comprehend. All the files on their photo discs are r-xr-xr-x by default so they're unable to rotate or modify the images once copied to their hard disk. I want to set one specific images folder on their system to automatically force any files placed there to be rw-r--r-- (and rw-rw-r-- for another shared images directory elsewhere). It seems that umask won't work since that can only take permissions away and not add them, and I'd rather avoid getting into messy ACL configuration. Is there a way to achieve this either generically or some hidden config in Gwenview itself? I use KRename myself for such tasks but this is way too complex for my parents to understand so I need something that works without them having to do anything.
I am trying to install KUbuntu and the installer is struck at "copying files." The first time the installation went fine besides grub not booting properly. So I went ahead and tried to reinstall Kubuntu and now the installer hangs at 15-23% at copying files. I've already erased a bunch of partitions and told the installer to install the OS on "the largest contiguous free space" and it still hangs. To be honest I haven't allowed to it hang at 23 percent for more than one hour.The CD is not the issue as I've tried both Kubuntu and Ubuntu installers with the same result.
The Install program is failing to see the hard disk!
Now heres the really weird bit. The live cd can see the drive just fine.
I have created partitions using gparted and the disktool also sees the drive just fine but as soon as I go back to the installer it shows no hard disk!
It's a SATA drive which I suspect might be a part of the problem.
Is there a way I can install without the install program?
Is there a way to make the install program see the drive?
I try to install Ubuntu on my new HTPC. I start Ubuntu with the Live CD and it boots fine. Then I want to start installing Ubuntu on my hard disk.Unfortunately the installer does not see my hard disk which has 1 empty ext4 partition. However, it can be seen and managed in GParted.
I have a ssd cosair harddisk with both usb and sata connecters. If I connect it with sata anything is working fine, and I managed to install Fedora core 13.
But I also want to be able to use the harddisk when it is connected with usb and that causes problems.
When I boot the Fedora Core 13 dvd It can't detect my usb harddisk.
When booting in install mode it just don't detect the harddisk.
When booting the dvd in rescue mode it don't detect the harddisk, and it don't create any entries in /dev/ for the harddisk. It is like there is no disk at all.
I have tested this on 3 different computers, so it is not a problem with my specific motherboard. So either it is a problem between my harddisk and Fedora Core 13, or there is some problems with the usb drivers in the boot image used by the Fedora core 13 dvd.
The disk is working fine if I connect it via usb to an existing Windows install, so the usb connection is working.
I installed Fedora core 13 with the harddisk connected to sata and then re-connected the harddisk to usb. It then boot up, but complain about missing root filesystem. Most likely caused by missing usb driver in my kernel.
But anyway, what I really want is the ability to boot from both sata and usb, so I can take the harddisk with me and boot it on other computers with usb.
So is there a command which allows me to build an kernel image which can boot from usb or am I trying to do something which is not really supported?
I did update my fstab to use LABEL=myroot
There is 1 Windows partition(NTFS) and 1 linux partition on the disk. (No seperate /boot partition and no swap)
I have facing a problem on installation of hadoop multinode cluster. I have installed single node cluster in 2 machines and configured the conf folder of both machines. i have taken one as master machine and another as slave. When i execute start-all.sh on master machine all the parameters are enabled properly on master but didnt enable on slave. When i execute start-all.sh on master iam getting eror that cannot copy log files into slave. The error is as below,
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
I'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows: ACER TRAVELMATE 290 256 RAM (240 usable) Intel Pentium M processor 1500 MHz 599 MHz Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller Sound card: Realtek AC97 Audio
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
hey guys i am trying "again" to dual boot on my gaming computer, and i am failing miserably. i boot the cd, it detects the hard drive i set the partitions and press finish and either on the partitioning or the files copying the installer crashes. what can i do to make it work with raid 0 (nvidia chipset).
after finising to run this command the image was trasfered to all harddirve. But no verfication message. i saw the hash value entry in md5 log. how to check the source and destination clone properly
My PC configuration is as follows: CPU: AMD Athlon II 245 X2 RAM: 2GB DDR2 MB: ASUS M2A74-AM SATA DVD-Writer WD 320GB SATA HDD.
SATA Controller is in AHCI mode in BIOS. Partition Table: 1. Pri. (Windows 7 Ultimate) 2. Log. (Data) 3. Log. 15GB free space (want to install Linux in this partition)
I want to install Debian 5.0.4 from DVD. But the installer is not showing any partitions, it says entire hard disk is blank. But I ran 'fdisk -l' in the console, it shows the partitions correctly.
I'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
im trying to copy a file over to my external hard drive and its a 5.8gig file and i keep getting this error saying there was a file copy error and then i click show more details and says Failed to attach the file: File too large
I got a problem with the motherboard of my computer and now I need to get some files out from the hard drive (an ext3 partition). I can access the files from another computer but because of the permissions of my user it doesn't let me copy the files over to another drive.
my computer was running Kubuntu 8.10 with a Vista dualboot. I also tried attaching the hard drive to another laptop, but because of the video drivers the display doesn't function properly.
When i try to install UBUNTU 11.04 it shows me the warning that there is no OS on my hard disk.But i have windows XP SP3 & UBUNTU 10.04 on my hard disk. Will all the files be deleted on my hard disk containing Windows XP if i install UBUNTU 11.04? How can i solve the problem?
I want to copy a .tgz file from my computer to an external hard drive. However, I get the following message:cp: cannot create regular file `/mnt/usbkey/ws_2008/misc/minipar-0.5-W indows.tgz': ermission deniedI get this error with any file I try to copy to the external disk. rnal disk is recognized, when I mount it, I can see the files and folder I have there, but seems that I cannot copy anything to it.When I try to copy the same files from my computer to a usb flash drive, everything works
I have two USB 2 external hard drives. I want to copy about 30 gigs of data from one to another. What command line command do I use ? I was thinking of using cp with the -R and -n options, but I have no idea what devices to refer to. I can't find any external hard drives in /etc/fstab and I'm not sure what /dev device each USB external hard drive uses. I just want to copy the files and the directories that they are in just as they are. There are no links and I do not want to do a backup.
I want to install ubuntu 10.10 alongside XP but all the CD's don't start (the CD's are The linux format magazine DVD and the 10.10 CD). When I install ubuntu via Wubi, if I ubgrade from 10.4 to 10.10 I can't star up Ubuntu and it gives me this eror mesage "eror: file not found".
I installed 10.04 or 10.10 on my laptop, which also has a 200 GB USB drive attached. Now, I am trying to go back and use the installer to repartition the disk. I noted that the scan of the external drive took about an hour, because I was on a webinar while it was happening. It would be nice if Installer noticed and asked if I really intended to sit by for an hour while an external drive was scanned.
When I went into the partitioner, there was another scan of several minutes, and then when I downsized a partition on the internal drive from 76G to 46G, there was yet another lengthy scan on the external drive. So, I know about this, and it's user error that I forgot to disconnect the drive, but it would still be nice if Ubuntu with some clue about what's most likely my intention, i.e. to NOT install on an external drive.
I have trouble installing ubuntu on my desktop machine. I had Mint before, reinstalled Win7 and wanted to upgrade to newest release as I didn't use Linux for some time.
Basically fdisk can see the disk but installer don't
I am attempting to install on a HP ML110 box. It has 2 SATA drives installed. From the live cd I can do fdisk -l and see both drives, I can see both from GPated but during the actual install it doesn't see any drives in which to install.
