General :: Find Blackberry Connected Via USB Cable?

May 29, 2011

I just connected my BlackBerry to Linux via USB cable. How do I know which device in /dev it actually is?

View 2 Replies


ADVERTISEMENT

General :: System Not Connected With LAN By Cross Over Cable / Fix It?

Dec 1, 2010

I have linux system which receive data from other system having linux OS in that also. but i cannot send data on other system.

View 2 Replies View Related

General :: Net Boot From Debian Server Using Directly Connected Ethernet Cable

Jun 23, 2011

I have a computer with grub installed, and nothing else. I'd like to install Debian on it without having to burn a CD. (and I don't have any flash disks.) It has a nice ethernet card, and I have another computer right next to it with an ethernet card. I also have an ethernet cable. However, I don't have any router free which I can mess with for these purposes. As I've looked up, apparently modern Ethernet cards don't need crossover cables, normal cables will work for this type of connection.

I've tried several different "tutorials" on how to set up a netboot server, but

None of them are complete. All of them assume that you understand how DHCP works, and that you can do things like set up a dnsmasq server. I don't understand the DHCP protocol, with submasks and whatnot (I know that it is the protocol for assigning computer network addresses, and that's it), and I don't think I should have to in order to simply connect two computers. All of the tutorials give you incomplete configuration files, and ask you to fill in things which I don't understand, and for me it doesn't make sense to customize these settings, as I just want to connect them and I really don't care what ip address the TFTP server has or whatnot. All of these assume that you are going through a router. I am not. When I try googling for ways to directly connect two linux computers with an ethernet cable, I can't even find instructions, just more references to "you need crossover cables".

So basically, I have two computers directly connected by ethernet cables. Tell me what packages I need to install, what the contents of my configuration files should look like, and what, if any, commands I need to run in order that when I turn on my second computer, and select network boot, it will start up a minimal debian system.

EDIT: Hmmm, it looks like I actually have a linux kernel installed too, but no root filesystem (so no other programs besides busybox).

View 1 Replies View Related

Ubuntu :: Brothers Printer Connected With A USB Cable

May 15, 2010

I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. if this is normal or if there is a fix. I have the printer connected with a USB cable.

View 2 Replies View Related

Ubuntu Multimedia :: Monitor Is Connected Via An HDMI Cable But No Signal

Jul 21, 2011

I am running 11.04 on a new Gateway with 8 gigs of ram. It is a solo installation. The monitor is connected via an HDMI cable. Everything was great (installation running smoothly for over a month) until last night. I just installed a netgear router and was setting it up with the system to try to get Stanza on my IPAD to connect to Calibre. Anyway, i suffered a severe freeze up warranting a hard boot. I could see the drive working, ancillary drives lit up, keyboard lit up so I know the system is working. The monitor did not come on, It shows a yellow light indication no signal. It is a 28" Hansspree. I tested the monitor by hooking it to a laptop. The monitor is fine. I cannot see anything on the screen so I can't boot to repair mode or use a CD. There is no signal.

View 1 Replies View Related

OpenSUSE Hardware :: USB Wifi Adapter Works When Connected Directly But It Doesn't With Cable

Jun 4, 2010

I am using this usb wifi adapter, it uses zd1211rw and it works fine if I connect it directly to the usb port, but if I add a cable (around 5mts) between the usb port and the usb plug, the device doesn't appear (I used iwconfig to check). The green light on the wifi adapter turns on but it doesn't blink like it does when connecting it directly without the cable. What could be happening?

I use the same cable + usb wifi adapter in windows, and it works fine, I can scan and connect without problems. When I use the cable, lsusb doesn't show the device neither, it does when connecting the adapter directly.

View 2 Replies View Related

General :: Find Out Server Is Connected To SAN Storage?

Apr 10, 2011

We have near about 90 RHEL servers. I want to find out which servers are connected to SAN [HP-SAN] storage???? Because many of them are having local hard disks.

View 2 Replies View Related

General :: Find Out What Computers Are Connected To An Access Point/router Using Terminal?

Feb 10, 2011

I would like to determine what computers are currently connected to my access point/router via the command line in Linux.

View 2 Replies View Related

Ubuntu Networking :: Ethernet Suddenly Crash And Says "no Cable Connected"

Apr 1, 2011

Yesterday it was everything OK in my PC with Ubutnu 10.4 and WinXP. Suddenly Ethernet stop working at Ubuntu, all what happened in between was a change of user, I trying changin user again, restarting PC, switching the cable (I have two ethernet boards) and nothing happened. It is like a virus attack, I don't know. I am writing now from WinXP in the same computer. Ubuntu says that I have no cable connected, but as you can see I am connected in Windows

View 3 Replies View Related

Networking :: Find A MAC Of Hardware Attached Via Ethernet Cable?

Apr 19, 2011

How can I find a MAC of hardware attached via ethernet cable? I have been working nicely with an industrial scanner that is controlled by a Linux PC via an ethernet cable, but the hard drive has died I need to get it working again. The problem is that the main PCB has a Realtek RTL8019AS ethernet controller chip: [URL] which I believe is used in the most basic way possible, applied straight off-the-shelf and unconfigured. To utilise the chip ARP commands are used to assign an IP address to the chips MAC address e.g. something like:

arp -s 192.168.2.5 00-05-a4-00-a8-f8

Unfortunately the actual MAC address was lost along with the HD Th only thing I could have a reasonable guess at is that the chip will have a default subnet of 255.255.0.0 or 255.255.255.0

View 5 Replies View Related

General :: Power Cable And SATA Cable In Different "boxes"?

Feb 18, 2011

I can't get a certain harddrive out of its mounting (screws too tight) , but I want it connected to a different computer. Is it possible to have the harddrive's powercable connected to one computer, and its SATA cable connected to another computer's motherboard? (The powercable is too short to connect it to the other computer.)

View 4 Replies View Related

General :: BlackBerry Curve (Verizon) Sync With Rhythmbox?

Feb 12, 2010

It seems that I can see my BlackBerry Curve (Verizon) on Rhythm Box...but I can't (for the life of me) figure out how to sync the music on Rhythmbox to my BlackBerry...(see screenshot)

I have a .is_audio_player file in the root of the BlackBerry device as well...

Code:
[christian@fedora-laptop 7713-989E]$ pwd
/media/7713-989E
[christian@fedora-laptop 7713-989E]$ ll -a
total 160K

[Code]....

View 1 Replies View Related

General :: Blackberry Imap Connection With Sendmail / Dovecot

Nov 19, 2009

I want to connect my blackberry mobile phone to connect with my Sendmail / Dovecot service... Is it require some extra settings??

View 3 Replies View Related

General :: Possible Too Use DD Command To Make Image File Of Blackberry 8330?

Feb 26, 2010

i was wondering if it is possible too use the DD command to make an image file of my blackberry 8330?i need it of the onboard memory and not the external memory card.

View 1 Replies View Related

Ubuntu / Apple :: EMac And IMac File Sharing With Ethernet Cable And Other Cable?

Oct 12, 2010

how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:

Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive

That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.

View 8 Replies View Related

Networking :: Can Cat5e Cable Tester Be Used For Cat 6 Cable

Apr 7, 2010

Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?

View 1 Replies View Related

Ubuntu Networking :: Find A Device Connected Via Ethernet?

Nov 12, 2010

I have a device (not a pc) connected to my pc via ethernet, it dose not show up in networks, I was hoping there was a way of scanning to detect for it, is there a way of seeing content of it is basically what I'm asking?

View 5 Replies View Related

Ubuntu Networking :: Says Wireless Is Connected But Cannot Find Server

Mar 1, 2011

Just installed ubuntu 10.04 on my Dell inspiron 1525 laptop. Everything got installed right, and I elected to select the sta driver rather than the B43 driver. After restarting, the b43 option disappeared. The wireless said it connected, but when i went to firefox it wouldn't load and said server not found. My wireless card is a bcm4312. Any ideas as to why this is not working?

View 7 Replies View Related

Networking :: Find The IP Address Of Connected Network Drive?

Mar 31, 2011

I desire to access a WD Netcenter network drive from Ubuntu 10.10 using NFS mounts.Several on line helps show how if you know the IP address of the drive. How can I discover the IP address of the drive. My Windows network is using DHCP, though I understand that the drive uses a static address. I know the MAC address of the drive. As a user (but not an administrator), I have much Unix experience.

View 3 Replies View Related

Ubuntu Networking :: Can't Find HP LaserJet 3015 On Network - Connected To A Win 7 PC Through USB?

Sep 1, 2010

I just installed Ubuntu 10.04, 32 bit, yesterday on my Dell Latitude 6500E and I am new to Linux. I can't find my HP LaserJet 3015 on my home network, even though it is connected to a new Windows 7, 64 bit PC thru USB. The other Windows PCs find it fine, and all 4 PCs can see each other on the network. So, I installed the HP software (http://hplipopensource.com/hplip-web...all/index.html) and that went smoothly, but the printer is still invisible. I also added Samba and that works great like everything else. I plugged the printer in directly to my Ubuntu laptop's USB port and it printed instantly. Now, if I could just print to the LaserJet on the network. Anybody got this one figured out? Does Wine provide a way around this?

View 1 Replies View Related

Ubuntu Networking :: Bash Script To Find Network Device Connected?

Jan 17, 2011

I need a bash script to run ARPON for the connected network device, eth1 or eth2. (ethernet or wireless)

Arpon has an option (-o) to select the network automatically, but it only works for ethernet, hence i need this script. I've also tried running arpon for ethernet and wireless at the same time, but the arpon process running the inactive device will consume all of my CPU.

So, basically i need a script to find which device is connected, eth1 or eth2 and then to run arpon -d -i <device connected> (or something like that).

Is there an easy way to do this? code...

I've searched everywhere how to find the connected device via bash, but i couldn't find anything.

View 1 Replies View Related

OpenSUSE Multimedia :: Put Dvd To Blackberry ?

Jun 17, 2010

If you want to put your dvd to another portable device,what do you often need? I want to put my dvd to my blackberry.

View 2 Replies View Related

Ubuntu :: Tether With A BlackBerry?

May 7, 2010

When I first got my BlackBerry, USCellular said I couldn't tether with Linux. That's not so, all you need is BlueTooth (USB adapter, built in, whatever)

You just install Blueman
Code:
sudo apt-get install blueman
Search for your BlackBerry, Pair it to your computer, then go to Devices > Serial ports > Dial Up Networking.

Your wireless connection should be in Network Manager. NOTE: You may have to right-click on NM and setup Numbers, Passwords, Usernames. I did.

View 1 Replies View Related

Fedora X86/64bit :: Blackberry Sync On 11

Oct 3, 2009

syncing their blackberry with Fedora 11. I followed the how to but haven't had any luck.

View 8 Replies View Related

Debian Hardware :: Accessing A Blackberry In Squeeze?

Jul 4, 2011

I have a blackberry bold and I am running squeeze with gnome. I want to be able to pull files off the bb via usb. When I connect the bb to my computer, the bb asks me to key in my password. Also, Under Places -> Computer, I can see an icon for the blackberry.

However, when I double click on the blackberry icon it does not open. Running "mount /dev/sda1" from the shell, I get "mount: mount point /media/sda1 does not exist".

View 1 Replies View Related

Fedora :: Sync Contacts Between BlackBerry And Evolution On 10?

Jan 20, 2009

HOWTO: Sync Contacts between BlackBerry and Evolution on Fedora 10

1. Overview

Open source tools are available to sync a BlackBerry with Evolution but it appears these tools are not supported by Fedora 10. The main thing that seems to be missing is the Barry plugin for OpenSync. Maybe the reason that this package has not been created is that Barry requires OpenSync version 0.22, whereas F10 ships OpenSync version 0.36. This HOWTO explains how to build all of the required components from source code. If the required package becomes available, this HOWTO would then be redundant.

This entire build and installation is performed in the home directory of a non-root user to ensure that no system files are broken. Some of the commands in this HOWTO must be run as root, when this is the case it is stated explicitly and otherwise the commands in this document should be run under a non-root account. The username for the examples below is erik.

2. Be a Developer

When you install F10 you are prompted to specify the uses to which your computer will be put. Hopefully you selected software development, if not your machine will probably be missing many of the utilities required for this HOWTO.

3. Initialize Evolution

Open Evolution and click on all of the buttons at the left to ensure that the necessary databases are created.

4. Prepare The Environment

[Code]...

View 5 Replies View Related

OpenSUSE :: Program To Sync Blackberry With Kontact?

Jan 24, 2010

I've got a Blackberry Bold and I'm trying to find a program to sync it with kontact, does one exist?

View 5 Replies View Related

OpenSUSE :: Best Way To Sync A Blackberry Bold 9000?

Mar 16, 2011

I have a Blackberry Bold 9000 that I would like to be able to sync with Kmail. Once I do this, I can be rid of the last bit of Windows I own (Windows Vista) on my laptop. Also, will I still be able to perform Blackberry software updates as required from my Linux sync? Once I have this solved I can get rid of Windows, and put OpenSuse on my laptop too.

View 2 Replies View Related

Ubuntu :: Access Memory Card On Blackberry?

Jan 2, 2010

how do i access the files on my blackberry's memory card? also is there a way to see ALL the files (like the system files and everything) on the phone?

View 3 Replies View Related

Ubuntu Networking :: Use A Blackberry Pearl As A Modem Using 9.10?

Feb 22, 2010

If anyone knows how to use the blackberry pearl as a modem on ubuntu desktop latest version.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved