General :: Blackberry Imap Connection With Sendmail / Dovecot
Nov 19, 2009I want to connect my blackberry mobile phone to connect with my Sendmail / Dovecot service... Is it require some extra settings??
View 3 Replies
ADVERTISEMENT
Ubuntu Servers :: IMAP And Method To Sync Calendars On IMAP With Both Thunderbird / Lightning Blackberry
Mar 1, 2010I'm looking for a method to sync my calendars on my IMAP server with both my Thunderbird/Lightning any my Blackberry. I found "IMAP Calendar Proxy" here recently, but it has been inactive for 5 years. I've seen people suggesting the use of services like Plaxo and such, but I don't like the idea of a third party messing with my calendars and contacts. Also, I've had to remove several viruses from computers with Plaxo, and I'm not sure if it in itself is a virus or not..... It certainly is a thorn in my side as is. This is for my personal IMAP server, so I'd prefer a free solution even if it is more difficult to install than a paid version. I mainly need it to just sync my calendar to my Blackberry and Thunderbird and couldn't care less about the contacts.
I've been Googling for things for quite some time now, and haven't really found anything that says that it will work with Blackberry and Thunderbird. They really only give a sense of maybe with nothing really defined. I can put on an Ubuntu server to sync everything? I don't want to leave my computer on all the time, and RIM has yet to come out with something decent to sync Blackberries and Thunderbird properly as far as I know.
Server :: Error: Connection Dropped By IMAP With Dovecot
Apr 19, 2011I am running SquirrelMail version 1.4.8-5.el5.centos.10 on a CentOS 5.6 64-bit distribution with MailScanner 4.83.4, Sendmail 8.13.8/8.13.8, and Dovecot 1.0.7 release. One user is having problems connecting via the SquirrelMail interface to his e-mail. Whenever he tries to connect, he gets the following error message:
Quote:
Error: Connection dropped by IMAP server with dovecot
I have tested another user account, and that user is able to connect without issue. I confirmed the presence of dovecot.index, dovecot.index.cache, and dovecot.index.log files in the user's <HOME DIR>/mail/.imap/INBOX folder. The /var/log/maillog files do not list any apparent error messages with SquirrelMail.
General :: Setup Dovecot To Use Imap?
Mar 20, 2011I just setup dovecot to use imap. I'm using the same cert and key that I'm using on Postfix smtp over ssl. It's a self signed cert. After running this
Code:
openssl s_client -starttls imap -connect localhost:993
I get this
Code:
CONNECTED(00000003)
[Code]....
General :: Using Dovecot IMAP To Access User Mail?
May 24, 2010I am having some trouble finding the information i need, here is what i am trying to accomplish.
1. Download POP email messages from cody@clearsky.net.au using fetchmail and assigning them to account "cody"
2. Connect and view the emails via IMAP using dovecot server logging in using "cody"
So far i have the fetchmail part working fine, but i cannot see any emails in the inbox. The messages are going thru however as they are visable in MUTT. i have edited my /etc/dovecot/dovecot.conf to change the mail directories, but no luck
General :: Failed To Start Dovecot POP3/IMAP Server?
May 13, 2011i have some problems to start my dovecot server. I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d. After command: service dovecot status: could not access PID file for dovecot ... failed!
After try to start dovecot with comand "dovecot": Error: mail_executable: Can't use /usr/lib/dovecot/pop3: No such file or directoryFatal: Invalid configuration in /etc/dovecot/dovecot.confI've read a few similar threads in this forum about dovecot errors but still can't to fix it.
General :: Setup A Functioning Imap And Pop3 Mail Server Using Dovecot-postfix?
May 4, 2010I'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.
However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.
General :: Configure Ourlook Clients Imap Settings With Sendmail Server?
Dec 15, 2009I want to use imap account settings in MS outlook 2003/2007 with backup end Sendmail server. When i configure imap settings in MS outlook 2007 it shows mails are coming from Sendmail server , but another local Personal folder attched with outlook client. I have changed my settings so that every send items mail are coming under imap send-items folder ,but that extra folder stilli in place. I do not see any option how to remove this extra folder from my PST list.? As this never comes with if we are using MS Exchange.. Is there any way i can change my local delivery bydefault with IMAP folder only and save my Contact in IMAP Folder?
View 1 Replies View RelatedServer :: Courier Or Dovecot For IMAP?
Mar 18, 2011Does anyone know if there are only personal preferences between the two IMAP servers or does one of a slight advantage over the other? I've used Dovecot only in the past but my package manager loads tons of MySQL libraries with Dovecot which is a problem since that's not authorized on my server right now. I can either install it from source or try another application like Courier.
View 4 Replies View RelatedServer :: Ssl Over Pop And Imap In Dovecot In Rhel 5.3
Oct 13, 2010i had configures sendmail and dovecote in rhel 5.3, as it was working fine with pop3 and imap, but it will not work for pop3s and imaps .the cerificate is chked with mutt it is fine , on client side i use outlook express/Thunderbird . the ports status shown as listening . moreover the certificate was not trusted by the clients. is there any more setting i have to do .
View 5 Replies View RelatedUbuntu Servers :: Roundcube Cannot Connect To Imap - Dovecot
Jul 20, 2010I have a problem connecting my roundcube to my imap server.
So, here it is : I have a working imap server (dovecot), installed following the guide provided here [url]. I can successfully telnet it, or ssl it (from localhost or from another ip of my local network). I can even use my thunderbird from another local computer. Well, for me it is working fine.
Then I installed roundcube (0.3.1-3) with synaptic, but I cannot connect to my localhost imap server.
I have set auth as plain ($rcmail_config['imap_auth_type'] = 'plain';)
Looking in my dovecot log, i see two different behaviour. One is when it seems correct, and roundcube log in imap server, but is disconnect immediately :
Second is when server is refusing the password :
I am working with a plain text passwd, with no encryption at all. Does roundcube encrypt the password I type before to sent it to imap ?
I cannot explain the first behaviour, when roundcube sometimes managed to connect but disconnect immediately. I manage ONE time to reach my mailboxes, but i don't know how, and this never happens again.
Server :: Dovecot: Local User Can't Login Imap And Pop3
Jul 3, 2011I'm trying to configure dovecot in RHEL6, but seems system won't accept local user login. I've already disabled pam. I've tried mutt -f imap://xxxx, and Thunderbird to connect as imap and pop3, but both failed, seems dovecot won't accept the password of the login user.the dovecot info log as, Jul 03 20:48:42 imap-login: Info: Disconnected: Too many invalid commands (no auth attempts): rip=192.168.1.3, lip=192.168.1.3, mpid=0, secured
#passdb {
# driver = pam
# [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
# [cache_key=<key>] [<service name>]
[code]....
Server :: Dovecot IMAP And Subfolders - Mac's Mail Application And Thunderbird - Both Come Up With Error
Mar 18, 2010I'm running Dovecot version dovecot-1.0.7 on CentOS 5.4. I'm trying to create subfolders and I can't. I've tried Mac's mail application and Thunderbird; they both come up with an error, basically saying that the server doesn't support level one folders(subfolders). Squirrelmail can't create subfolders neither. I did some reading and thought that perhaps the problem lies in the /etc/dovecot.conf file; specifically with the "mail_location" directive. I currently don't have that directive active which means Dovecot uses defaults settings: saving users' mail in the %u/mail folder. Is there any way to configure Dovecot to use subfolders?
View 14 Replies View RelatedCentOS 5 Server :: Starting Dovecot Imap: Fatal: Protocol Pop3 Given More Than Once
May 21, 2010CentOS 5.4
/etc/init.d/dovecot start
Starting Dovecot Imap: Fatal: Protocol pop3 given more than once
CentOS 5 Server :: Error: Starting Dovecot Imap: Fatal: Listen(995) Failed: Address Already In Use?
Jun 28, 2009Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
Server :: Sendmail - Configure Pop And Imap?
Feb 25, 20101- how to config pop and imap on sendmail server
2- how to config smtp restriction on sendmail server
Server :: The Sendmail + Dovecot Doesn't Work
Jan 28, 2010I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
Server :: Sendmail And Dovecot Login Failed ?
Jun 3, 2011Installed postfix and dovecot, Also created a user account on linux like abc but when i send mail form sunil@test.abc.com (domain)
I get below error:
I reset the password of user sunil, but no gain
log error:
Slackware :: 13.1 Sendmail-procmail MAILDIR For Dovecot Server?
Jan 3, 2011Built an MTA/LDA Slackware Server and seperate MDA (Dovecot 2.2) Slackware Server. Used the slackwiki Sendmail TLS SMTP-AUTH guide for the MTA/LDA Server.
http://www.slackwiki.org/index.php?t...TH&redirect=no
The ../cf/cf/sendmail-slackware-tls-sasl.mc config file has Procmail sorting as:
FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
I don't understand the arguments ($), but know the -Y forces mbox. The /var/mail directory is hardlinked to where ever the spool directory is. I want the Dovecot MDA server to use NFS or UNFS to grab user's mail from the MTA/LDA Server. Problem is the hardlink. Can't nfs share a hardlinked directory.
Is there a way to change the MTA sendmail mc config file above to have LDA promail send to /home/mail, so I can nfs that directory? And preferably in MAILDIR format? BTW: I can't find any procmailrc config file on this Slackware Server. I should have all the settings in my /etc/mail/sendmail.cf config.
Fedora Installation :: Setup An Email Server Using Sendmail And DOVECOT On F13?
Sep 11, 2010I wish to setup an email server, using sendmail and DOVECOT on F13 With no modification of the DOVECOT config file ( fresh installation ), I can see that :
service dovecot restart
shows me :
service imap stop
service imap start
In the config file, I have :
protocols = imap pops imaps pop3s
and of course, I cannot connect as pop3
Software :: Configuration Files For: MUTT + GMAIL + MSMTP + IMAP + FETCHMAIL + SENDMAIL?
May 29, 2010I found this page to have the configuration of : but I have to adapt and get always errors. [URL] What are the minimum configurations so that one can do : echo test | mutt me and it sends it via msmtp and mutt one can read his emails using hte imap enabled on the account?
View 1 Replies View RelatedGeneral :: Sendmail Connection Refused By Host
Jan 13, 2010Is the following sendmail scenario possible? If yes, what modification(s) should be made, in order to work?
system1 with host1 - where the sendmail is executed
system2 with host2 - where the destination email address is stored
When trying to sendmail from host1 to an email address stored on host2. but with the format username@host1, the sendmail service returns Connection refused by host1.
Server :: Can't Login To Sendmail Server Using Cyrus-imap On Fedora Core
Apr 4, 2011I recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedCentOS 5 Server :: Email Server Setup Using Sendmail And Dovecot?
Apr 24, 2009I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
Fedora Servers :: Fedora 10 - Sendmail / Dovecot Relay
Jun 7, 2009I am trying to setup sendmail on a fc10 box with dovecot running imap. I have everything configured and running on the server. For example, when I run "echo 'test' | mail -s test user@mydomain.com" or even to someuser@gmail.com, the mail goes through just fine. I can then reply from both of those accounts back to the server, no problem.
Relaying denied Cannot send mail. The SMTP server does not recognize any of the authentication methods supported by Entourage. Try changing the SMTP authentication options in Account settings or contact your network administrator.
OpenSUSE :: Thunderbird Not Connection Using IMAP Since 11.3
Aug 3, 2010Using Thunderbird 3.0.6 under OpenSuse 11.2 worked without a problem. I have installed Opensuse 11.3 (freshly on a new partition) and I found that Thunderbird 3.0.6 is NOT connection with the same server. I used the old configuration (~/.thunderbird) from the 11.2 partition first to no avail, later remove the ~/.thunderbird link to make a clean start with Thunderbird, also to no avail.
I see some traffic coming on the server from my new 11.3 machine, but the courier IMAP server doe not respond at all.
So, same configuration, same Thunderbird version, difference is only 11.3 versus 11.2.
I now returned to 11.2 back again without any changes.
Software :: ERROR: Connection Dropped By IMAP Server. Squirrelmail
Mar 22, 2011I have configured postfix and sendmail in my fedora11 i phased some problem i added before installing 2 users they can able to logged in squirrel mail but when i create a user they cann't able logging into squirrel mail they are getting bleow error
##########################
ERROR:
ERROR: Connection dropped by IMAP server.
###########################
Software :: Courier IMAP Functionality - Delete W/o Marking - Similar To Gmail IMAP ?
Apr 23, 2010I've been running Courier IMAP for many years now, but when I added gmail's IMAP to my Outlook I noticed something interesting: when you delete a message, it gets thrown into the trash instantly.
With Courier IMAP (or any other IMAP server, for that matter), when you delete, it first marks it for deletion. Then after you Purge Deleted Messages it either gets rid of them or moves them to trash.
Is there a way to implement this in Courier IMAP?
General :: Find Blackberry Connected Via USB Cable?
May 29, 2011I just connected my BlackBerry to Linux via USB cable. How do I know which device in /dev it actually is?
View 2 Replies View RelatedGeneral :: BlackBerry Curve (Verizon) Sync With Rhythmbox?
Feb 12, 2010It seems that I can see my BlackBerry Curve (Verizon) on Rhythm Box...but I can't (for the life of me) figure out how to sync the music on Rhythmbox to my BlackBerry...(see screenshot)
I have a .is_audio_player file in the root of the BlackBerry device as well...
Code:
[christian@fedora-laptop 7713-989E]$ pwd
/media/7713-989E
[christian@fedora-laptop 7713-989E]$ ll -a
total 160K
[Code]....