Does anyone know if it's possible to grab the temperatures from an ATI card using the open source radeon driver (not fglrx/catalyst).
I must say that the radeon driver has come a long way and works wonderfully under Lucid for my needs. I'm just a bit worried about the lack of PM support and how high my temps might be. I would prefer some way to keep an eye on things
I have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies View RelatedI just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
My system config is in my sig.I want to know if I have hardware acceleration using radeon open source driver.I did substantial searching on the internet and have come across this post:ATI Hardware Acceleration - XBMC Community Forum
I am doing all this because I have read on the internet that the open source radeon driver does not enable H/w acceleration properly which means that choppy performance while playing HD movies and / or while playing OpenGL games. Not that OpenGL games don't work, they just work very slowly even with Direct Rendering of Mesa drivers. Then there's this thing about Kernel Mode Setting as well which isn't available in the proprietary ATI driver.
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies View RelatedI have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
Last year I had a gui tool for configuring the radeon open source drivers in my old slackware install but now I forgot the name of it. I'm pretty sure it was gtk based and no matter what I type in google I can't seem to find any reference to it. There is a radeontool but that's not it. Anyone know what the name for it was, or something else that provides easy configuring of the open source radeon drivers? I remember it had lots of options to configure including some I've never heard of. Thought it'd be easy to find now since it seemed so officially supported during the time I used it!
View 1 Replies View RelatedI've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View RelatedI want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View RelatedWe all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
The default install of F15 is not detecting my multiple monitor setup properly.I have two dell 17" monitors running on an ATI hd4650. In system settings the display tool does not detect the second monitor. The monitor is working and on but just shows a mirror of the main display.I didn't see an xorg.conf anywhere to try to fiddle with that... so I don't know what to do. Hitting the Detect Displays button does nothing but cause the 2nd display to flicker for a minute.
View 1 Replies View RelatedWhen I do the 'sensors' command in Terminal, this is what shows up:
apple@fruit-bowl:~$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +52.0C
Core0 Temp: +49.0C
Core1 Temp: +51.0C
Core1 Temp: +48.0C
Both Core0 and Core1's temperatures are shown twice with nearly identical temperatures and it looks like that the temps are switched around. Is there anyway I can fix this?
I have this one comp with an Radeon (MSI-R7850) card in it and its been working fine untill I tried to open Blender (3D creation Studio) today. Blender pops open and crashes. I opened it in command line to get the output but I dont know where to go from there. Blender used to work just fine on this comp. does on my others (they're NVidia).
output;
Code: Select all:~$ blender
X server found. dri2 connection failed!
connect failed: No such file or directory
X Error of failed request:Â BadLength (poly request too large or internal Xlib length error)
 Major opcode of failed request: 157 (GLX)
 Minor opcode of failed request: 1 (X_GLXRender)
 Serial number of failed request: 161
 Current serial number in output stream: 164
comp;
Code: Select all~$ uname -a
Linux node-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02) x86_64 GNU/Linux
what I can use in Ubuntu for monitoring CPU core temps, CPU and memory speed and such, used CPU-Z, prime, HD tune up and and the like when OC'ing and UC'ing my Windows PC's but what Ubuntu equivalents are there?
View 9 Replies View RelatedI have been trying to add more sensors for hdd drives temperatures but i see only one and no place/options to add more.I know they all work,(i have 4 physical hdd) if i use the hhdtemp command (dev/sdXX) it show the temp for all of them (one at time).
Any way to make gkrellm display all of them ?
I,ve been googling around and searching on various forums but haven't found anything about that (other than how to make it work,or troubleshooting to make it work).
I've tried conky ..but gives me more errors than info and i gave up.
I can not seem to find a pdf viewer browser plugin other than the actual craprobat plugin from Adobe. The default Ubuntu install comes with a perfectly good open source stand alone pdf viewer, but this means that the browser has to save it to your download directory then run the external viewer, and eventually your download directory is all cluttered up. I would much rather just view the pdf in the browser.Is there no open source browser plugin?
View 1 Replies View Relatedi want to know how to contribute to open source...i don't know from where to start??where to look for??
View 9 Replies View RelatedI am trying to install the k10temp driver for sensors in order to get temps off my cpu. I found this but I dont know what to do with the makefile.
View 2 Replies View RelatedDoes anyone knows of any open source proxy/web traffic monitoring application so I can run reports on users web browsing for Linux? Something equivalent to websense? but free I'm not really concern about blocking any traffic only running reports.
View 2 Replies View RelatedI have been testing with the ATI Catalyst drivers. I have made a package from the 9.12. I have found that they were not working the way I want, so i tried to switch back via synaptic. I have removed everything which had to do to "fglrx"
now when I restart, here is the message i get
Quote:
UBUNTU is running in low graphic mode The following error was encountered. You may need to update your configuration to solve this. (EE) failed to load module "fglrx" (module does not exist, 0)
For information, it does start in low graphic mode. I have reinstalled the "fglrx" module, but the problem is still the same. If I reinstall the fglrx drivers from synaptic or terminal, I am back with the newer catalyst driver. I cannot switch back to the ubuntu repository one it seem.
I have done the following to try to get the open source back
Quote:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
I still have the same problem. Now I do not have any package installed with "fglrx" I have reconfigured xserver-xorg and it will only start in low graphic mode.
I want to know how to remove unwanted Open Source Software not listed in Ubuntu Software Center. I tried to used Add/Remove Program. That did not work for me.
View 3 Replies View RelatedJust install 10.10 on a 4 gig flash drive, I like it a lot. Is there one download I can do to add all the non open source programs such as Flash, adobe reader, and such?
View 1 Replies View RelatedI've read about the open source PIM Chandler and how it's kind of a new twist on software of its kind (although I guess I missed the release by a few years...) and I've been dying to try it out. I've had no success, however. It seems the most recent release is for Jaunty and I'm running Maverick. I guess there are some pretty well entrenched dependency issues. These talk about it: here and here. There doesn't seem to be a solution anywhere.. Does anyone have a potential solution to this? Has anyone even heard of Chandler?
View 3 Replies View RelatedMy sister works a lot with boating frame design, etc. and she needs a program that calculates all the measurements for you, but the program she wants only runs on Windows and costs $275.
Here is the website to the program: http://www.clearwatercanvas.com/ and/or http://www.kingrichardco.com/FrameBenders/EZFrame.htm
Is there an open sourced alternative to this program that is free, or is there a simple way to make an open sourced alternative?
I am looking for an opensource-software that works with debian/ubuntu. I want to count rows from a couple of MySQL-tables on a server and that way keep statistics of changes in those tables. The tables should be read something like every night, and it shows how customers and subscriptions are changing. Today there is about 10 000 rows * a couple of tables, and it would be nice if it is presented in a webpage...
View 4 Replies View Relateddebian testing 2.6.39-2-686-pae KDE. desktop > little cashew on top right > add widgets > categories > system info > hardware temps.is there any way to convert them to celsius?
View 5 Replies View RelatedI'm trying to monitor the temps of /dev/sdb and /dev/sdc in Conky (/dev/sda is an SSD so not necessary, or even possible). I have HDDtemp running as a daemon, and returning correct temps for both drives when run from konsole. Output:
Code:
linux-b98i:/home/hgm # hddtemp /dev/sdb /dev/sdc
/dev/sdb: SAMSUNG HD501LJ: 35°C
[code]....