Ubuntu Multimedia :: ATI Proprietary Vs Open-source Driver On Radeon HD 5xxx
Aug 23, 2011
I have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
View 3 Replies
ADVERTISEMENT
Mar 2, 2011
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
View 2 Replies
View Related
May 28, 2010
I have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies
View Related
Aug 3, 2010
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies
View Related
Feb 21, 2010
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
View 10 Replies
View Related
Feb 25, 2011
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
View 2 Replies
View Related
Nov 12, 2009
Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.
View 9 Replies
View Related
Jan 13, 2011
Is this card supported in Squeeze by either the non-free firmware or the proprietary driver? I just got one to stick into an older box that will be going to a college girl that wants the 3D desktop in KDE. The built-in video was a joke and wouldn't even work without compositing. It was one of those crappy, non-standard pieces of crap known as a "Unichrome" (not the pro).
View 10 Replies
View Related
Apr 19, 2011
I am looking for the opinions of some linux users as to why they prefer using open source software and what they perceive as the main differences between it and proprietary software. In particular, I am curious as to what meaning, if indeed any, users and contributors ascribe to the open source community and how they view it on a less technical level.
View 14 Replies
View Related
Sep 4, 2011
After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.
View 4 Replies
View Related
Feb 18, 2010
Just wondering if this is possible? Total n00b with linux, this is my *thinking* 3rd week using Ubuntu 9.10. And I am using my system for surfing the web, listen to music, video`s and chatting. And I got the "funny" tough`t of trying to maybe play World of Warcraft again on this computer. Yes I have run it before when I had XP and W7 on it. The w7 experience on this computer was a bad mistake. So yeah, the thing I am really wondering on is this: Wine, WoW with WoTLK ( Wrath of the Lich King ), with the newest Open Source ATI graphic driver?[URL].. According to that page (you have to Ctrl-F and "Open source ATI drivers" to find the what I mean ) it is possible, but I am wondering on how to do it?[URL].. and been reading on different sites that you can play games with wine in a new X. Curious on how that can be done, and if that MAYBE is the best thing to do with my Wow game. Havent installed it YET, thinking of downloading the web installer after this post. If the moderators should find this is the wrong place for this to be asked, move it to the "Wine" section, if its better placed there.
View 7 Replies
View Related
May 2, 2010
Does anyone know if it's possible to grab the temperatures from an ATI card using the open source radeon driver (not fglrx/catalyst).
I must say that the radeon driver has come a long way and works wonderfully under Lucid for my needs. I'm just a bit worried about the lack of PM support and how high my temps might be. I would prefer some way to keep an eye on things
View 1 Replies
View Related
May 3, 2011
My system config is in my sig.I want to know if I have hardware acceleration using radeon open source driver.I did substantial searching on the internet and have come across this post:ATI Hardware Acceleration - XBMC Community Forum
I am doing all this because I have read on the internet that the open source radeon driver does not enable H/w acceleration properly which means that choppy performance while playing HD movies and / or while playing OpenGL games. Not that OpenGL games don't work, they just work very slowly even with Direct Rendering of Mesa drivers. Then there's this thing about Kernel Mode Setting as well which isn't available in the proprietary ATI driver.
View 7 Replies
View Related
Sep 4, 2010
Last year I had a gui tool for configuring the radeon open source drivers in my old slackware install but now I forgot the name of it. I'm pretty sure it was gtk based and no matter what I type in google I can't seem to find any reference to it. There is a radeontool but that's not it. Anyone know what the name for it was, or something else that provides easy configuring of the open source radeon drivers? I remember it had lots of options to configure including some I've never heard of. Thought it'd be easy to find now since it seemed so officially supported during the time I used it!
View 1 Replies
View Related
Jul 11, 2014
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
View 1 Replies
View Related
Jan 12, 2010
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
View 4 Replies
View Related
Nov 23, 2010
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
View 6 Replies
View Related
Nov 29, 2010
I'm afraid I only have basic experience with *nix command lines and have only been using Ubuntu for a week, so I may require a little bit of hand holding on something as nuts-and-bolts as a driver issue.
Relevant Hardware:
From lspci -v
Quote:
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470 (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e390
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90200000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 2000 [size=256]
[Code]....
The Symptoms/Experience: Under the default installation of Ubuntu, I have no sound. When I install the proprietary ATI drivers, I have sound. I can uninstall and reinstall the proprietary drivers and recreate this every time.
My only problem with using the proprietary driver is that there's a lot of problems with video playback that is fixed with the free, default driver. But when I use it, I have no sound and watching a movie is still not very fun. From everything I read, many people are using the provided ATI driver with sound and fixing that should be easier than fixing the ATI driver's video tearing, which has largely stumped the community. Having failed to install "OSS" and now having no sound with either driver, I'm probably going to reformat/reinstall today but am looking forward to fixing this issue.
View 5 Replies
View Related
Jan 23, 2010
I'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code:
No package 'xorg-server' found
No package 'xproto' found
No package 'fontsproto' found
so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code:
No package 'x11' found
I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
View 9 Replies
View Related
Jan 9, 2011
I installed the proprietary driver in System->Administration->Additional Drivers, but after installing when I am required to restart, I restart my computer and encounter a black screen. I tried using Ctrl-Alt-'-" to change the resolution but that didn't work because the computer is completely frozen, so I have to reboot in recovery and uninstall the driver...
This also makes it so I am unable to go to the maximum resolution my desktop can obtain. (1920 x 1200, but I'm limited to 1600 x 1200)
View 1 Replies
View Related
Sep 1, 2011
I have Ubuntu 11.04 on a netbook, and I'm getting a lot of tearing on video playback--both online and offline. The graphics card is some generic intel card, and there doesn't seem to be a driver for it. So, is there a way to enable vsync without having a proprietary driver?
View 3 Replies
View Related
Feb 20, 2016
Debian Jessie kernel 3.16.0 AMD64. Legacy GeForce 66oo GT video card.
I just re-installed Jessie via Debian non-free DVD. When I run apt-get update && apt-get upgrade, the screen says to the effect :
"Before Nouveau can be used, must remove Nvidia config from xorg.conf and xorg.conf.d"
Is there a simple way to keep Nouveau and blacklist or prevent Nvidia driver from being automatically installed in the first place?
View 6 Replies
View Related
Aug 1, 2010
I installed ATI 10.7 driver successfully but its not up to my expectations, e.g VLC not working right (video stutters, etc). And I want to revert back to the default radeon which was a lot better until the ATI 10.8 driver comes out.
By the way, what is this in my /usr/share/ati/fglrx-install? code...
And how do I revert back to 'radeon'?
View 9 Replies
View Related
May 5, 2010
I'm still searching for a propiertary driver for my netbook (Asus EEE 901 with an Intel GMA950 graphic card). Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Does someone know how to install a driver with 3D-support? Should I use a driver from[URL].. I had no problems at Karmic, because the driver was found at "Hardware Drivers". Lucid doesn't show me any driver there. Is there any correlation between the big intel-graphic issues and my 'problem'?
View 5 Replies
View Related
May 26, 2010
I am using the most recent ubuntu kernel (2.6.32-22-generic) for general stuff, and a real time kernel (2.6.31-10-rt) for music recording. Everything was working fine under Karmic.
When I upgraded to 10.04, I had problems with my Nvidia video card, so I uninstalled everying related to Nvidia. And reinstalled the driver using the installer script from the Nvidia website.
I can install the driver for one kernel, but when I boot on the other, it says my X config does not work, and I am back to a low-res no-effect display.
If I then try to reinstall the driver under that kernel, then the first one stops working with the Nvidia driver.
View 1 Replies
View Related
Dec 17, 2010
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
View 9 Replies
View Related
Apr 7, 2011
Steps that the pdf file from ati says :
To install the ATI Proprietary Linux driver using the Automatic option, follow these steps:
1 Launch the Terminal Application/Window and navigate to the ATI Propri-etary Linux driver download.
2 Enter the command sh ./ati-driver-installer-8.573-x86.x86_64 to launch the ATI Proprietary Linux driver installer.
The ATI Proprietary Linux Driver Setup dialog box is displayed It shows the ati with the penguin. Mine doesnt show that for the file: "ati-driver-installer-11-3-x86.x86_64.run
This is the driver that I got from the website. But Im still having issues with Wow not working or recognizing that I have a great card (XFX HD 4770).
View 8 Replies
View Related
Aug 4, 2011
I just bought a new Club 3D (ATI) Radeon HD 3450 (8xAGP) graphics card, but received with it some problems.My Ubuntu 10.04 installation would not boot any more. It just gave a blank screen while caps- and scroll lock were flashing on the keyboard.
I then installed 11.04 which works fine except being unable to play even 720p video smoothly (the card should be able to play at least 1080p). When I enable the restricted driver ("ATI/AMD proprietary FLGRX graphics driver") and restart, the system will not boot. It gets to the point where it displays the "ubuntu" sign with the five dots below (where the dots normally change color one at a time), they all change color immediately and then the system freezes.
I realized when I received the card that it requires a power supply of 300 W, whereas the one in my PC is only 240 W. Could this cause the explained behaviour? I am not too happy about changing the power supply, unless there is real reason to think that this is the source of the problems, since I know myself well enough to know that I will probably break something in the process.
View 2 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
Aug 7, 2015
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
Code: Select alldaniel@Daniel-PC:~$ glxinfo | grep rendering
direct rendering: Yes
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_buffer_object, GL_NV_polygon_mode,
xorg.log: [URL] ....
dmesg: [URL] ....
system:
nvidia gtx 760
intel xeon e3-1230v3
View 1 Replies
View Related
