Fedora :: Hardware Acceleration Using Open Source Radeon
May 3, 2011
My system config is in my sig.I want to know if I have hardware acceleration using radeon open source driver.I did substantial searching on the internet and have come across this post:ATI Hardware Acceleration - XBMC Community Forum
I am doing all this because I have read on the internet that the open source radeon driver does not enable H/w acceleration properly which means that choppy performance while playing HD movies and / or while playing OpenGL games. Not that OpenGL games don't work, they just work very slowly even with Direct Rendering of Mesa drivers. Then there's this thing about Kernel Mode Setting as well which isn't available in the proprietary ATI driver.
View 7 Replies
ADVERTISEMENT
Jan 12, 2010
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
View 4 Replies
View Related
Mar 13, 2011
I have an ATI Mobility Radeon HD 5000 series (I believe 5470, but I forget). I installed the open source ATI drivers using instructions at https://help.ubuntu.com/community/RadeonDriver. Wonderfully, this gives me triple monitor support (LVDS, VGA, and HDMI at the same time), which the proprietary drivers couldn't do for me. But now I don't have 3D support (and XBMC crawls horribly as a result.) glxinfo shows me I have software rendering:
Code:
$ glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.9-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
View 1 Replies
View Related
Jan 20, 2011
The 3D acceleration of my Radeon 4670 doesn't work and I want to fix it. I have installed the drivers like in the sticky explained and also tried it one time with disabled AIXGL and Composite. I use Fedora 13.
Here are my "xorg.conf", the "LIBGL_DEBUG=verbose glxinfo" and my "Xorg.log"
xorg.conf:
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....
Xorg.log:
But it seems like it can't be opened...
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.323] (EE) fglrx(0): Cannot shmat() low memory
[ 30.323] (EE) fglrx(0): em) error: Permission denied
[ 31.984] (EE) AIGLX error: dlopen of fglrx_dri.so failed
[ 31.984] (EE) AIGLX: reverting to software rendering
View 2 Replies
View Related
May 2, 2010
Does anyone know if it's possible to grab the temperatures from an ATI card using the open source radeon driver (not fglrx/catalyst).
I must say that the radeon driver has come a long way and works wonderfully under Lucid for my needs. I'm just a bit worried about the lack of PM support and how high my temps might be. I would prefer some way to keep an eye on things
View 1 Replies
View Related
Feb 21, 2010
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
View 10 Replies
View Related
May 28, 2010
I have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies
View Related
Mar 2, 2011
I just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
View 2 Replies
View Related
Sep 4, 2010
Last year I had a gui tool for configuring the radeon open source drivers in my old slackware install but now I forgot the name of it. I'm pretty sure it was gtk based and no matter what I type in google I can't seem to find any reference to it. There is a radeontool but that's not it. Anyone know what the name for it was, or something else that provides easy configuring of the open source radeon drivers? I remember it had lots of options to configure including some I've never heard of. Thought it'd be easy to find now since it seemed so officially supported during the time I used it!
View 1 Replies
View Related
Aug 3, 2010
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies
View Related
Aug 23, 2011
I have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
View 3 Replies
View Related
Jul 11, 2014
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
View 1 Replies
View Related
Jun 7, 2011
I was looking at purchasing a radeon x1300 for a multimedia pc for my lounge and was wondering if anyone knew whether hardware video acceleration with this card was supported with ubuntu? I read that on the ati website that it does support mpeg2,4, etc video acceleration,but didn't know if this was so for ubuntu. I have a few bluray quality movies that I would be interested in playing, so hardware video acceleration is a must.
View 1 Replies
View Related
Sep 15, 2013
I recently installed Debian Jessie on my computer with M2A-VM motherboard and Radeon X1250 graphics card. The problem I am having is some games are running extremely slow, Torc and Mame64. I ran glxgears and it displayed gears running nicely. I ran glxinfo and it said direct rendering yes. It also displayed a lot of lined ending with none or slow. How I can make the graphics card run faster?
View 3 Replies
View Related
May 31, 2011
The default install of F15 is not detecting my multiple monitor setup properly.I have two dell 17" monitors running on an ATI hd4650. In system settings the display tool does not detect the second monitor. The monitor is working and on but just shows a mirror of the main display.I didn't see an xorg.conf anywhere to try to fiddle with that... so I don't know what to do. Hitting the Detect Displays button does nothing but cause the 2nd display to flicker for a minute.
View 1 Replies
View Related
Mar 15, 2010
I have a Dell 1737 laptop with ATI Mobility Radeon HD 3650. I have the ATI fglrx drivers installed.
All OK.... BUT
I have no hardware graphics acceleration to any application.
glxgears consumes 29% of the CPU to run.desktop compositing consumes 0-50% CPU depending on activity.
running opensuse 11.2 up to date...
View 9 Replies
View Related
Jun 28, 2011
Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies
View Related
Jan 2, 2009
We all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
View 9 Replies
View Related
Oct 15, 2009
Why Fedora doesn't supports non open source programm?
View 6 Replies
View Related
Sep 12, 2010
I want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies
View Related
Feb 5, 2011
i understand ubuntu comes with opensource ati drivers installed by default?(Correct me if I am wrong)So does Fedora come with open source drivers installed by default too? or do i need to install them as well.I have radeon x700 card...and there is only one game that i would like to play on fedora 14 is Warhammer 4000: Soulstorm (2008 game)Will the open source drivers be enough or do i need to install the proprietary ones...(and is it hard?).
View 1 Replies
View Related
Aug 31, 2010
Are there any network backup solutions out there that are open source and awesome? Something that behaves and is easy like Symantec Netbackup or Arkeia network backup?
View 3 Replies
View Related
Oct 1, 2010
I am looking for a free version of something similar to Camtasia [url] or TurboDemo [url]
I have seen Wink, but it doesn't allow you to highlight regions/zoom etc.
View 4 Replies
View Related
Jan 24, 2011
I need a good uml tool in opensource. Any List of names and the way to install it!
View 2 Replies
View Related
Feb 8, 2011
Is there any open source software that can open MS Visio files?
View 8 Replies
View Related
Sep 7, 2011
I want to install a VM ware server (Open Source )like VM ESXi 4 Which are Open Source VM servers available?
View 3 Replies
View Related
Mar 6, 2010
Is there anyway I can remote in to a fedora machine via a Win 7, Vista or Server 2008 machine and have the gui desktop? I can vnc to it but it's command line only.If possible, I'd like to use the defacto std tool called remote desktop installed with the win os.If not any are there any open source-al free tools I could install on win to get this functionality?
View 8 Replies
View Related
May 11, 2010
A good free/open source HTTP Server which can be setup on Linux Fedora 9? If there is a good instruction manual for the installation.
View 4 Replies
View Related
Feb 5, 2011
Currently I am working on one project in which I am transferring existing setup to Open Source platform. I am having brand new IBM server with two NIC card and want to setup Firewall. I am searching for good solution which suits to me. Which firewall system I should go for? I am thinking of IPCop.
1) Firewall should support OpenVPN
2) Easy to manage for Resident technician
3) Should be block streaming, facebook and others sites.
View 1 Replies
View Related
Apr 4, 2010
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
View 1 Replies
View Related
