How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
Last year I had a gui tool for configuring the radeon open source drivers in my old slackware install but now I forgot the name of it. I'm pretty sure it was gtk based and no matter what I type in google I can't seem to find any reference to it. There is a radeontool but that's not it. Anyone know what the name for it was, or something else that provides easy configuring of the open source radeon drivers? I remember it had lots of options to configure including some I've never heard of. Thought it'd be easy to find now since it seemed so officially supported during the time I used it!
View 1 Replies View RelatedA friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies View RelatedMy system config is in my sig.I want to know if I have hardware acceleration using radeon open source driver.I did substantial searching on the internet and have come across this post:ATI Hardware Acceleration - XBMC Community Forum
I am doing all this because I have read on the internet that the open source radeon driver does not enable H/w acceleration properly which means that choppy performance while playing HD movies and / or while playing OpenGL games. Not that OpenGL games don't work, they just work very slowly even with Direct Rendering of Mesa drivers. Then there's this thing about Kernel Mode Setting as well which isn't available in the proprietary ATI driver.
As far as I can tell, I have the proprietary AMD drivers installed.
I want to install the open source drivers instead to see if I can get better performance.
According to this site, I have to install the PPA to my software sources as instructed here. I've done that. But how do I actually install the open source drivers?
When I upgraded my 2004 Apple G5 PPC tower from 10.04 lucid to 10.10 server the ATI RadeonHD 2600 video drivers got bonked. I can only get the command line.
View 5 Replies View RelatedWe all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
i understand ubuntu comes with opensource ati drivers installed by default?(Correct me if I am wrong)So does Fedora come with open source drivers installed by default too? or do i need to install them as well.I have radeon x700 card...and there is only one game that i would like to play on fedora 14 is Warhammer 4000: Soulstorm (2008 game)Will the open source drivers be enough or do i need to install the proprietary ones...(and is it hard?).
View 1 Replies View RelatedDoes anyone know if it's possible to grab the temperatures from an ATI card using the open source radeon driver (not fglrx/catalyst).
I must say that the radeon driver has come a long way and works wonderfully under Lucid for my needs. I'm just a bit worried about the lack of PM support and how high my temps might be. I would prefer some way to keep an eye on things
I installed fedora 13 yesterday in my PC and I cant install drivers for my ati radeon HD 4200, I downloaded the driver from the page of amd, I installed it but it doesn't work.
View 7 Replies View RelatedI have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies View RelatedI just upgraded my rig from a 4770 to a 5770 video card.
My 4770 had basic 3d support out of the box with the open source radeon driver. My 5770 doesn't seem to (basic rendering only with no compositing), although this page suggests it does:
[URL]
Is there anyone out there who is running a 5770 or knows how I can upgrade to a newer version of the open source driver? I'd rather not use catalyst (Id don't game with ubuntu) and I found the open source driver to be quite nice.
I have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I have been testing with the ATI Catalyst drivers. I have made a package from the 9.12. I have found that they were not working the way I want, so i tried to switch back via synaptic. I have removed everything which had to do to "fglrx"
now when I restart, here is the message i get
Quote:
UBUNTU is running in low graphic mode The following error was encountered. You may need to update your configuration to solve this. (EE) failed to load module "fglrx" (module does not exist, 0)
For information, it does start in low graphic mode. I have reinstalled the "fglrx" module, but the problem is still the same. If I reinstall the fglrx drivers from synaptic or terminal, I am back with the newer catalyst driver. I cannot switch back to the ubuntu repository one it seem.
I have done the following to try to get the open source back
Quote:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
I still have the same problem. Now I do not have any package installed with "fglrx" I have reconfigured xserver-xorg and it will only start in low graphic mode.
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
any idea if openSUSE will be able to get this into 11.4?Broadcom swims upstream, tackles Linux WiFi woes with new open drivers
View 1 Replies View RelatedI have been trying to get sound to work through the open source HDMI drivers, does anyone know how to do this?
I get a perfect picture through HDMI but no sound. The ATI HDMI option is not muted and is enabled. I dont know what else to do. I opened a terminal and did "aplay -l" and I can see the device in there. I DO get sound using the proprietary drivers supplied by ATI, but I get screen tearing and makes the picture look horrible.. So for now its Sound vs Picture quality... Why cant I have both :/
I have an ATI Mobility Radeon HD 5000 series (I believe 5470, but I forget). I installed the open source ATI drivers using instructions at https://help.ubuntu.com/community/RadeonDriver. Wonderfully, this gives me triple monitor support (LVDS, VGA, and HDMI at the same time), which the proprietary drivers couldn't do for me. But now I don't have 3D support (and XBMC crawls horribly as a result.) glxinfo shows me I have software rendering:
Code:
$ glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.9-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
I have an ATI Radeon 4200 HD Mobility, with 256 MB of my RAM dedicated to it. I installed FGLRX, but the performance actually dropped compared to the open source drivers that come installed by default. I removed fglrx, and reinstalled the Radeon packages, but no avail.
Now, when I boot, I get the error, "unable to load module 'fglrx'," and my only option is to run Ubuntu in Safe Graphics Mode. This tells me that the computer is still trying to load FGLRX, and there's something that needs to be altered down at the boot level.
My questions is about switching graphics card on a Intel/AMD hybrid system using open source drivers (Envy 15 with HD4000 and AMD 7690M). I was waiting for an proprietary driver from AMD but apparently it will not be released in the near future and I need to use AMD chip for my 3D intense applications.
View 0 Replies View RelatedThe ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
I want to install a VM ware server (Open Source )like VM ESXi 4 Which are Open Source VM servers available?
View 3 Replies View RelatedIs there anyway I can remote in to a fedora machine via a Win 7, Vista or Server 2008 machine and have the gui desktop? I can vnc to it but it's command line only.If possible, I'd like to use the defacto std tool called remote desktop installed with the win os.If not any are there any open source-al free tools I could install on win to get this functionality?
View 8 Replies View Related[URL].. One of my reference link: A very good place for search for drivers since many hardware manufacturers do not have a driver site for open source.
View 1 Replies View RelatedI just attemted the install for the Radeon unified drivers. Im running Ubuntu 10.04 with a X1200 series graphics card. 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] The setup seemed to go fine and I restarted as it suggested. but now when I attempt to open the new catalist control center application it gives me a message about not detecting any Radeon components or I need to configure them. Sadly this message isnt copy/pasteable.
View 4 Replies View RelatedI have been having lots of trouble getting my system up and running after I installed a Radeon HD 5850 on my suse machine. I did as they told by uninstalling the previous drivers and installing the new ones as stated in ATI Catalyst™ 10.2 Linux Installer Note.
2)sh ./ati-driver-installer-10-2-x86.x86_64.run
7) /usr/bin/aticonfig --initial
This was all done from a terminal... And I did this for Suse distributions 11.1 and 11.2. Both times my mouse cursor disappeared, but this could easily be fixed by adding the option "SWCursor" "on" option under the Device section.
This was only part of the solution as I still have incredible lag on my windows e.g. when I scroll down a web page it takes incredibaly long to render and you can see it rendering the page in steps from the bottom up. As well as when I drag a window across my desktop it lags behind and you can se it reforming at the new position.
Finally I tried different releases of the proprietary driver. I tried 10.1 and this did not give me the mouse cursor issue, but the window lag still prevails. These are my xorg.conf and xorg.0.log files for my current setup. Opensuse 11.1 and proprietary driver version 10.1. I have an Radeon HD 5850 card.[URL]..
I should add that I am on a private network, and only have the oss, non-oss and packman repositories available. (Is it possible to add the AMD driver repository? Because I have trid and the firewall refuses connection.)
how to install ati drivers for the ati radeon x1200 chipset? i searched everywhere but i could not find a link to a repository for this chipset
View 7 Replies View RelatedHas anyone successfully installed 3D drivers for HD 5750 on Fedora 13? I've tried ATI Catalyst 10.7 and mesa-experimental drivers, but they wasn't working.
View 11 Replies View Related