The machine has two hard drives. sda1 has Windows XP, sda5 has Fedora 8, and now sdb1 has ubuntu 10.04.When I do "update-grub," it shows ubuntu, XP, and Fedora, but the conf file only reflects the update of the former two. Likewise, when I restart the machine, GRUB only shows ubuntu and XP.
View 2 RepliesNow i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies View RelatedI'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
im still relatively new to linux and fedora, and i was wondering if it would be possible to install another distro on an external hard disk and keep fedora's grub. i tried this once before but the following things happened: (fedora is on my internal hard disk) the installation to the external hard drive went well, and i set the boot partition to C: because thats the first partition however when i unplugged my external hard drive, and proceeded to boot into fedora, nothing happened. my bios screen flashed and then a blank screen with a cursor. is there anyway to keep Fedora's grub where it is and just install another linux distro without that said distro's grub and add that distro to the grub list in fedora manually? or even boot to my external from the bios itself (because mine can do that)
View 11 Replies View Relatedsda win xp
sdb Fedora 14
There is a problem (I can see) with F14 install.
In the past the grub was installed during install (since Fedora 6).
Now choosing an install disk "sdb" (install target
drive) requests a drive to be chosen for
bootloader, but if the alternate drive sda is
chosen (this case the XP drive), it is formatted.
I have gone though install many times to see what I missed.
This once worked beautifully. What did I miss?
I now have XP and Fedora 14 installed but I cannot reach Fedora 14.
I had to do a fixmbr to get to XP
Since I cannot reach F14, I cannot get to grub2 and have to use .97
why is grub2 not in fedora 14 ? Is there any way to uninstall grub and install grub2 on fedora 14 ?
View 3 Replies View RelatedI was running Fedora 13 and used preupgrade to upgrade to Fedora 15. Unfortunately, probably because my boot partition is not located in the MBR, after rebooting and choosing Fedora from my boot manager, the system hung on a blank screen. I am guessing this is because I need to reinitialize grub.Can I do this from my Fedora 13 CD or do I need to burn a Fedora 15 CD and use rescue mode from there ?
View 1 Replies View RelatedI installed windows 7 after I installed fedora so now i can't access my fedora OS. I've tried all the guides I found on the internet but fedora 10/11 guides doesn't seem to work for 12.
View 4 Replies View RelatedWhether it is possible to install GRUB in windows to boot. Because I have installed one of the linux distro on USB. Now without the USB i am not able to boot windows.
View 1 Replies View Relatedi have a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install.i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13.how to add fedora 13 menu and boot in to it...
View 1 Replies View RelatedAfter I do a fresh install of Fedora 10 and reboot the computer, nothing happens. All I get is a blinking cursor at the top of the screen. It's like Grub is messed up and won't load. Grub is installed on the Master Boot Record of the drive I need to boot from.
I have an ASUS P4C800 motherboard with one SATA drive that Fedora 10 is installed on. I also have a HighPoint RocketRaid 1740 SATA RAID controller card. When I take the RocketRaid card out, everything boots like normal, but when it is installed all I get is a blinking cursor at the top of the screen. I need the RocketRaid card because it houses my RAID5 array with all my documents. The reason I got the RocketRaid card is because it has linux support and my motherboard was listed on their compatibility chart. I had this exact same setup running Windows XP and everything worked fine. I did not load any drivers for the RocketRaid card and was going to do that after the system was setup. I don't know if that is the problem since the installer does not see the raid array on the RocketRaid during install. I was thinking that maybe Grub is seeing another disk and doesn't know what to do and sits there with a blinking cursor.
I don't know where to go from here and I am a linux newbie. On a side note. If anyone knows of a good linux book (specifically Fedora), please let me know.
I am trying to install fedora on my semi aging PC. It installed fine and prompted me to reboot. So I did, but then as soon as it tries to load the grub menu, it gives me the following error: no such device: 2cb414b7-7620-48a9-93af-f03aec3495e4How do I restore grub and make it work? Right now I am using the livecd to type this. I do not really need the grub loader since I am only running one OS, which is currently fedora. I recently had Ubuntu 10.04 which did not have grub (at least it is not shown during the boot) and suited me more than fine.
View 3 Replies View RelatedIn HDD with 2 partition
sda1 windows xp (ntfs)
sda2 windows 7 (ntfs)
1. It is possible to install grub?
2. If not, if I create sda3 (ext3), and install grub there and boot both windows will be possible?
I'm trying to install FC15 x64, the install goes smooth and reports no errors, I looked around in /tmp/anaconda.log but couldn't see any relevant errors either, basically after rebooting and trying to boot my new install, I get:
error: file not found
Entering recue mode...
grub rescue> _
I've reinstalled 3 times now, first I was using USB, but now have tried with CD too. All I want is for GRUB to be installed on /dev/sda2 which is where my install is, and which is also the default location where the installer supposedly installs it to. I've also tried unplugging my other hard disks, and installing with just the first drive.
have a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2.. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install. i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13
how to add fedora 13 menu and boot in to it..
I need a solution for my problem, I need to install and manage my clients & servers through active directory, currently server have installed FC10, I want to install Windows 2003 Server Enterprise with AD (Active Directory) but this installation update the MBR of hard disk, so how can recover or reinstalled the grub w/o re-download the FC10.
View 1 Replies View RelatedFirst time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6
since FC1 i install Fedora on a seperate HD on my PC without installing GRUB. I always made a bootdisk and since FC4 a boot CD with mkbootdisk. If i try to make a bootdisk via mkbootdisk --iso --device/tmp/bootdisk.$(uname -r).iso $(uname -r) under Fedora 12 i get a kernel panic if i try to start from this disc:Kernel panic: not syncing: VFS: Unable to mount root fs on unknown-block(0,0)PID: 1, comm: swapper Not tainted 2.6.31.5-127.fc12.x86_64 #1Call Trace: then there a some hex values and the message that i should choose a proper root partition. if i start with options linux root=correct_bootpartition i get the same kernel panic with the same message.I found out that it must have something to do with the kernel*.img file. In earlier versions the of fedora it has been copied to the iso image. That's not done anymore.Iso size F11: ~ 8.8mb; Iso size F12: ~3.4MB
View 2 Replies View RelatedI have used ubuntu distribution in wich i can install grub on a fat32 Filesystem. Can i install Grub on a fat32 filesystem with Fedora 12?
View 6 Replies View RelatedMy laptop came with a hidden partition for restoring Vista instead of an install disk. I installed Ubuntu 9.04, which had an "Advanced" option that allowed me to install grub in the Ubuntu partition without writing over the MBR. Then I used EasyBCD to add Ubuntu to the Vista boot loader. I wanted to do this so that I can still restore the factory copy of Vista from the hidden partition if I need to. I upgraded the Ubuntu to 9.10, still using grub. When I did a fresh install of Ubuntu 10.04 it went to grub2, and I haven't figured out how to boot into it with EasyBCD yet.But I would like to try Fedora anyway. I will wait a couple of days and get 13.
1. Which grub does Fedora 13 use?
2. Will Fedora 13 allow me to install grub in its own partition without writing over the MBR?
I just tried to install F13. I can't install grub to any drive other than that which F13 gets installed on. When I click on the drop-down menu, only /dev/sdd is available.
View 4 Replies View RelatedI'm dual-booting windows 7 on (hd0,0) and Fedora 13 on (hd0,4) and it's working fine until I repaired my windows 7. Afiter I did the repair on my windows 7, The booting sequence now skips the grub menu and automatically boots into windows without allowing me to take my pick.
View 1 Replies View RelatedCurrently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI was trying to install Fedora to dual boot with Vista in the middle it said that the installation failed and now it will not run grub to let me choose between Windows and Mint which I had installed. All that happens is it shows a command line and says "grub rescue>"
View 1 Replies View RelatedI had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
Where can I install grub? I know it can be installed to the mbr of a hard drive. I also know it can be installed to a /boot partition. Can I install it to a lvm partition? Does it have to be /boot? grub-install --root-directory=/boot /dev/hda Does this command install grub to a partition and link it to a separate /boot? I have fedora, but this is a live cd. I need to learn where I can install grub2 to boot
View 3 Replies View RelatedI have installed Fedora-9 and i customized my kernel. But i did a big mistake in the last steps while customizing. Unfortunately i have executed below shell cmd. grub-install /dev/sda windows drive is not visible But /dev/sda3 is a windows vista file system, now sda3 file system is not in visible for both in linux and also vista OS. How can i retrieve my data back in vista sda3. Here is the info of system
$ su -c '/sbin/fdisk -l'
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
adding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]......
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot