Red Hat / Fedora :: Once Grub Was Installed Automatically With Fedora Install
Mar 16, 2011
sda win xp
sdb Fedora 14
There is a problem (I can see) with F14 install.
In the past the grub was installed during install (since Fedora 6).
Now choosing an install disk "sdb" (install target
drive) requests a drive to be chosen for
bootloader, but if the alternate drive sda is
chosen (this case the XP drive), it is formatted.
I have gone though install many times to see what I missed.
This once worked beautifully. What did I miss?
I now have XP and Fedora 14 installed but I cannot reach Fedora 14.
I had to do a fixmbr to get to XP
Since I cannot reach F14, I cannot get to grub2 and have to use .97
View 9 Replies
ADVERTISEMENT
Feb 17, 2010
I'm sure there is a thread on this somewhere, but after looking though the first 100+ search results, I can't seem to find it.
After a kernel update today, I noticed that new kernels are not being added to my grub menu.lst (so consequently, I was running an older kernel).
Any obvious reason why this would happen (kernels being installed normally, with yum update)? I thought the whole process was supposed to be automagic.
Would it have anything to do with the fact that I just kept my F11 menu.lst, and added a F12 kernel to it when I installed F12 (to a separate partition), then eventually (today, finally) removed the f11 kernels from it?
Here's my menu.lst, in case it's useful:
Code:
View 14 Replies
View Related
Feb 2, 2011
I'm trying to automatically remove some of the old GRUB entries that pile up after a few updates and just want to leave live 2 or 3 there along with my Win7 entry. I was looking and saw that there is a utility for Ubuntu but I couldn't find anything for Fedora.
View 7 Replies
View Related
Apr 23, 2011
I have just installed a new hard drive with Fedora 14.
How can I edit it when my kernel version is 2.6.35.12-88.fc14.i686.PAE?
I want to dualboot with Windows XP?
Here's what I tried:
It didn't work? What did I type wrong?
View 5 Replies
View Related
Nov 16, 2009
After a kernel upgrade on my linux, my grub.conf become empty. How can I auto generate grub.conf file? I don't want to do it from scratch.
View 3 Replies
View Related
Mar 21, 2011
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
View 19 Replies
View Related
Dec 10, 2009
I tried upgrading to my linux to fedora 12 through updates and that completely screwed up my computer. Next I burned a disc with F12 and tried to a clean install but the installer stops after 823 packages. I tried an older FC9 image and that does not go through either. Now I'm stuck , I cannot get to my windows because I cannot get to GRUB . Is there a way to just install GRUB and boot into windows. I see that GRUB is around package # 600 or so in the installation and it does get upto that point.I just need it to finish instead of barfing on packages (no skip option in linux installer how clever!)
View 1 Replies
View Related
Feb 15, 2010
Prefactory note - I've also posted this question on the Ubuntu forum, but so far no solutions have been provided.
My system has several hard drives. The important ones are these:
Sata 1 - Fedora 12
Sata 3 - Windows 7
Slave 1 - Storage
Sata 1 was NOT installed with grub. When I switch OSs, I do it by rebooting and choosing the other drive as primary.
I downloaded an ISO of Ubuntu 9.10 (64 bit) and burned the DVD of it. I backed up Slave 1 and then booted off the Ubuntu DVD. I clicked on "Install Ubuntu", selected Slave 1, and installed onto it.
Subsequently I rebooted the machine, going into the BIOS to boot off Sata 1, so I could get my Fedora Firefox settings to replicate them under Ubuntu.
Instead of Fedora 12 booting, Grub 1.97 came up. It had 5 choices, Ubuntu, Ubuntu Repair, Memtest, some other Memtest, and Windows 7.
Subsequently I tried cracking the box and physically disconnecting Slave 1. When I rebooted Sata 1, it crashed to a grub command line. Apparently when Ubuntu installed, it infected Sata 1 with grub, even though it installed the rest of Ubuntu on Slave 1.
I really, really, REALLY need to get access to the Fedora 12 drive. It's got my work on it.
how I can get grub out of Sata 1 and regain access, or maybe reconfigure it so it recognizes the existence of Sata 1? Personally, I don't want it there; that's why I never installed it in the first place.
View 14 Replies
View Related
Jan 14, 2009
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies
View Related
Mar 4, 2010
I'm a F11 user and I wanted to see the new Windows 7 and right now, the computer doesn't boot via grub.
View 2 Replies
View Related
Sep 10, 2010
Does iptables get installed automatically during installation of F13 or is it a manual option to have it installed during installation?Why do I ask because I had a friend install F13 for me on my new machine in the states.After some hair pulling when I couldn't get connected via port 80 I learned that iptables was "blocking" the port.
View 8 Replies
View Related
Jan 2, 2010
I have two problems. I installed a RHEL variant (scientific linux) on an already dual boot system with ubuntu and vista.
It replaced GRUB with (I think an older) GRUB version and to add to that I cannot see my ubuntu ditro anymore. is there a way of reinstalling the GRUB that came with ubuntu then adding the RHEL distro to it?
my second problem is that I cannot figure out how to enable wake on lan in scientific linux (RHEL). on ubuntu I would just write a small script and update all runlevels to run it at startup. what is the alternative on redhat?
View 5 Replies
View Related
Oct 5, 2010
I installed Fedora13. But my Windows is Gone. I followed Next-->Next and completed installation after 1 hour. When i restarted the system, isaw blue screen something called grub and windows is not listed. I had important data in it where did it go?
View 14 Replies
View Related
Dec 9, 2009
Typing yum install akmod-wl set everyhting up for me automatically in Fedora 11, but now I get no sign I own a wireless card. I am running Fedora 12 64bit on a Macbook 4,1
View 6 Replies
View Related
Dec 24, 2009
im still relatively new to linux and fedora, and i was wondering if it would be possible to install another distro on an external hard disk and keep fedora's grub. i tried this once before but the following things happened: (fedora is on my internal hard disk) the installation to the external hard drive went well, and i set the boot partition to C: because thats the first partition however when i unplugged my external hard drive, and proceeded to boot into fedora, nothing happened. my bios screen flashed and then a blank screen with a cursor. is there anyway to keep Fedora's grub where it is and just install another linux distro without that said distro's grub and add that distro to the grub list in fedora manually? or even boot to my external from the bios itself (because mine can do that)
View 11 Replies
View Related
Feb 6, 2011
why is grub2 not in fedora 14 ? Is there any way to uninstall grub and install grub2 on fedora 14 ?
View 3 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Feb 21, 2011
i a newbie at linux and i installed Fedora 14 with minimum services and software in order to install Dynamips/Dynagen (Cisco router emulator).when i try to install Cisco rpm -ivh dynamips-0.2.8RC2-1.i386.rpm file i get the following:
error: Failed dependencies:
libc.so.6 is needed by dynamips-0.2.8RC2-1.i386
libc.so.6(GLIBC_2.0) is needed by dynamips-0.2.8RC2-1.i386
[code]....
View 4 Replies
View Related
Feb 28, 2011
I am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
View 1 Replies
View Related
Dec 18, 2010
I wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
View 2 Replies
View Related
Jun 29, 2010
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
View 9 Replies
View Related
Jan 5, 2011
I have 6GB of RAM and I'm planning to install Fedora 14 32-bit to achieve a higher degree of compatibility. Does fedora automatically download and install a PAE enabled kernel when it detects more than 4GB of RAM (Just like Ubuntu)?
View 14 Replies
View Related
Aug 23, 2010
Unfortunately far for all unicode characters can be displayed in Fedora by default, (much less than in M$ Wnd). There is a tool that aim to find and install missing fonts when an non-displayable character appears, but it starts mainly when I accidentally open non-text file in terminal and never when a web-page I open in Mozilla Firefox (or Konqueror) contains such kind of characters. So, I see a rectangle with hexadecimal number of character in it (or simply empty rectangle in case of Konqueror) and don't know if there is a easy way to see it by installing missing font automatically (or manually at last) for range of this character or a way to install complete font collection to display all unicode characters from all ranges.
View 2 Replies
View Related
Dec 13, 2009
this is a tar.gz file and i've installed it lately . i wanna take it out now in my system. but dont know so how dyou re move a software installed using ./configure make make install?
View 1 Replies
View Related
Jun 15, 2010
i want to install Fedora 13 on a x86 PCi want to boot from a usb disk, and install from a LAN http serverbut i got a faild as "Unable to retrieve the install image"i have tried to check apache log,access log:
Code:
10.0.0.105 - - [15/Jun/2010:18:44:20 +0800] "GET /fedora//images/updates.img HTTP/1.1" 404 298 "-" "anaconda/13.42"
[code]...
View 10 Replies
View Related
Apr 30, 2011
I have two desktop environments installed on my Fedora pc. Here it is
[Code]...
Is it still possible to install other desktop environments despite already having installed KDE and GNOME? If I happen to install other desktop environments such as XFCE, LXDE, CDE, EDE, UDE, will I be able to use one particular environment by disabling the rest whenever needed
View 4 Replies
View Related
Oct 16, 2010
i am trying to install real player in linux but it's showing that it;s already installed after using its rpm
but no icon is there..
View 5 Replies
View Related
Apr 10, 2011
After installing opensuse grub disappeared from the Linux Mint I want to boot into Linux Mint.
View 2 Replies
View Related
Jan 23, 2009
On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies
View Related
Mar 6, 2009
Currently i am using mapserver 5.0.3 , AGG 2.5-6 on fedora 9. I need some help with mapserver and AGG support. I am trying to use AGG/PNG outformat in the mapfile as well as i added precisely. When i call the link through browser i recieved the following error:
loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver AGG/PNG, but this driver isn't configured. It is clearly evident that from the error, the driver is not configured. since all the mapserver version 5 suppotrs AGG rendering backend, so i checked whether mapserver supports AGG or not.
[kapil@localhost cgi-bin]$ mapserv -v
MapServer version 5.0.3 OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG OUTPUT=WBMP OUTPUT=SVG SUPPORTS=PROJ SUPPORTS=FREETYPE SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT SUPPORTS=WFS_SERVER SUPPORTS=WFS_CLIENT SUPPORTS=WCS_SERVER SUPPORTS=SOS_SERVER SUPPORTS=THREADS SUPPORTS=GEOS INPUT=TIFF INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=MYGIS INPUT=SHAPEFILE
[kapil@localhost cgi-bin]$
I found that my mapserver doesn't support AGG means SUPPORTS = AGG is missing in the above output. But i have already installed AGG in my system. In order to clear this issue i gone through many threads in forums, but i was not satisfied with the answers. Atlast i came to know that, i have to recompile the mapserver with AGG. The following link gives you some idea about compiling mapserver with AGG in linux [URL] But the problem now i am facing is i have installed both the mapserver and AGG through YUM INSTALL command so i dont know how to recompile mapserver with AGG support. I think, there will be no configuration file normally when installing through Yum insatll command.
View 2 Replies
View Related
