First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View RelatedI am having a problem installing Fedora from a CD.When I put the installation CD into the drive and restart the computer, the computer does not recognize the CD and boots automatically into my old version (version 8) of Fedora.I have already made sure that the CD drive comes before the HDD drive in my BIOS settings, and I have already tried using different CDs.
View 10 Replies View Relatedin my first start on fedora 13, with grub 0.97 did not recognize ubuntu licid, but recognizes winxp, now i try to change to grub 2 but, always begin whit grub1,
how i can replace grub1 by grub2 or how i can boot from grub2 of lucid?
I have just installed Fedora 11 64bit on a new hard disk, using Intel 975BX2 motherbord, 3Gbyte RAM, 320Gbyte hard disk etc., USB mouse and keyboard. The installation went fine, but when I enter the password for the boot (I assume GRUB was installed) it fails to recognise the password. Do this three times and the boot segment ??? fails to initialise.
I recall a linux magazine i buy indicating that you have to copy and paste the password manually after installation, but i cannot recall the article date. Is this a problem - the password protection for the GRUB boot loader does not work at installation time when using the graphical interface ?. I did not use any odd characters - basic letters and numbers.
after new entry regarding memtest tool, grub doesn't see it.
View 11 Replies View RelatedI usually don't have problems installing Linux but Fedora won't install into 4 GB for me. I get to the partitioner, try to create a 4 GB partition, actually have 7 GB free, but it tells me there is no space on the drive. As I said, I usually don't get this problem but have not tried Fedora before and don't understand.
View 3 Replies View RelatedI upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies View RelatedI am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
I am trying to write data to dvd with brasero. But it does not recognize the dvd-rw as such. Seems to think it's a cdrom.
View 1 Replies View RelatedI am trying to make my desktop look like a Mac. I followed the instructions here. Here is exactly what I did:
1. Downloaded the Mac4lin package.
2. Extracted folder in my downloads.
3. Went to System > Preferences > Appearance.
4. Clicked install.
5. Installed Downloads > Mac4Lin_Install_v1.0 > Mac4Lin_Install_v1.0 >b GTK > Mac4Lin_Meta_v1.0.tar.gz.
However, when I do this, it doesn't recognize it, as you can see in the picture. Did I do something wrong when installing it?
I just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies View RelatedI recently installed Ubuntu 11.4 and I want dual-boot machine. Before Ubuntu on machine was installed only windows7. Since I install Ubuntu I do not see Grub(or any other) boot loader. When I start computer it automatically boot Ubuntu without prompting choose OS menu.
How can I set grub2 to ask me this question?
Here is my partition configuration
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
[Code].....
I've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies View RelatedI've been trying to install 11.04 on my 2009 Macbook Pro, but I can't complete the installation because Ubuntu doesn't recognize my wireless connection.
View 9 Replies View RelatedAfter a few tribulations, I managed to get VMWare server installed. The only problem is that it will not recognize any usb devices. I installed usb in the virtual machine using the VMWare interface and in preparation for that, I followed the instructions in the tutorial to the letter regarding fstab and the vmx file. Supposedly, at least according to Windows control panel, the usb controllers and interfaces are installed. The VMware web interface says the same thing. However, neither the Device tab on VMWare nor VMware Tools show any usb devices. The usb devices - a printer, removable drive, and magicjack - are all recognized by Linux. How can I get the virtual Windows machine to recognize the devices?
This is crucial since my major use for it is to run the magicjack which is not supported in Linux.
but I know a fair amount about the OS. I really like openSuSE, and I was trying to install 11.2 on my laptop, completely blank hdd. It installed just fine;I used the default options (the partition scheme was /boot, swap, root, /home) and started thesktop without a hitch. However, when I restarted, my BIOS would not even recognize an OS on the hard drive. I was also unable to boot using the installation DVD. I tried to use the repair feature, and I would either get a message saying that the boot loader was corrupt,d could not be repaired, or that the package database didn't match the version of openSUSE installed. I've tried re-installing multiple times, all with the same results. I have tried different partition schemes and I've tried different booting settings, such as enabling boot from root or /boot partition
View 9 Replies View RelatedI had XP, Debian and F14 installed. Bootloader was the Grub from F14.
I installed F15 from DVD overwriting F14. In the new grub.conf I added:
Quote:
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
title Debian
[Code].....
So I am experimenting with other linux distros.....I just installed a small partition with OpenGEU, the one still based on Ubuntu.....now it wont recognize Mint. Ubuntu Studio is next on my list, but before I invest any more work I want to make sure I can add more partitions to grub, not just the most recent linux partition...
I think that future distros of linux should have a fix for this....if you install linux it should detect every other operating system on the disk, not just windows plus the most recent linux install.
install /boot separate? I always create a / and /home partition but never separate boot. Does that make life easier?
i can't boot up my win XP after installing Ubuntu 10.10.
I decided to replace my Vista partition with Ubuntu 10.10 so i redo my partitions and split the current Vista partition to a swap and root partition and install Ubuntu 10.10
Everything went well and i got Ubuntu up and running. However, i realize that GRUB 2 didn't recognize my existing windows partition. I double-check on grub.cfg and see that the default os_prober didn't recognize my XP partition either.
After search on the internet for a while, i found many similar issue where most are fix when manually adding the entry yourself so i decided to add an entry 11_XP under /ect/grub.d/ for windows XP and confirm that the new entry are added to the update grub.cfg file before restarting
Code:
### BEGIN /etc/grub.d/11_XP ###
menuentry "Windows XP" {
set root=(hd0,5)
insmod chain
drivemap -s (hd0)
[Code].....
Got kernel panic when upgradeing from 9.04 to 9.10... Have a tough time with this sparc server. On newer disto it doesnt regognize the cdrom in installation what will result in no install. I tried all trix I found on internet about this issue but none of them did it for me. So I went back in versions. When I come to 7.10 gutsy everything seems to work, so now everything is up and running.
But now I want it back on version 9.04. Last time (a year ago) I did the same thing, and just do-release-update to current version. Now that doesnt work. Maybe becourse I need some updates to gutsy, and the gutsy repositorys is not available anywere. how I can pass this upgrade to 8.04? I set the APT::Get::AllowUnauthenticated true; to pass this far...
I recently installed ubuntu 10 on my Compaq mini 730ej. I installed it using the wubi software. Although it works fine with regular lAN connection, it doesn't recognize any wireless networks - when I click the icon I see a "missing firmware" massage. Now - I am a linux newbie, so be gentle, but I would very much like to solve this problem since.So what can I do?
View 9 Replies View RelatedInstalled 11.3, but GRUB doesnt recognize win7 despite the fact that it did say it recognizes it during installation. What now?
View 1 Replies View RelatedMy computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies View RelatedI am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
I had Windows 7 ultimate installed on my netbook and installed Ubuntu 10.10 using the 'Install alongside other OS's' option which put windows onto another partition and created one for ubuntu.
Anyway I've tried reinstalling the grub but I never get a grub boot menu when I boot it up and the grub won't recognize the windows install
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies View Related