I'm dual-booting windows 7 on (hd0,0) and Fedora 13 on (hd0,4) and it's working fine until I repaired my windows 7. Afiter I did the repair on my windows 7, The booting sequence now skips the grub menu and automatically boots into windows without allowing me to take my pick.
View 1 Repliesis it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I'd like to switch to dual booting on my main machine. However, I'm like, a really serious competitive gamer. I play in leagues, go to LANs and performance is my greatest concern here. If I dual boot Fedora & Windows, will I have any performance issues with Windows, while booting in Windows, if I have Fedora on the same hard drive?
I don't think there should be any issues but I would like some clarification or nformation on it. Searching for 'gaming' with Linux isn't very information when it comes to dual booting, so I was just wondering.
TL;DR: Will dual booting Windows & Fedora cause any CPU/GPU/LAG/performance issues while I boot into windows and play a game (Source, TF2, Unreal Engine Games...etc)?
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies View RelatedI'm wondering how I would go about dual-booting Ubuntu with openSUSE installed first?
I'm just a little bit concerned about the versions of Grub overwriting the openSUSE version or theme or something.
Would it work okay if I just shrink my openSUSE partition and then set the Ubuntu installer to install Ubuntu to the free space only or do I need to edit the grub file and stuff?
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
I'm kinda new to Linux. My problem is that a new Fedora O/S entry is added onto grub everytime I receive an update on Fedora (I think). Eg:
Fedora 15 15.40.0-4 ...
Fedora 15 15.40.0-3 ...
Fedora 15 15.38.0-0 ...
Windows 7
How do I stop this? Ideally I'll only have two entries, Fedora 15 and Windows 7 where Windows is set as the default primary o/s to boot up. The current method I use is to fiddle around with that grub file and set default to entry 3, which used to be Windows 7 but is now a Fedora (which means Fedora is now set to default boot up).
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies View Relatedi currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
View 5 Replies View Relatedi am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
I would like to know if what I am thinking is possible and, if so how to set it up. I have a Compaq Workstation that I have loaded on it VMWare ESX 3.5 and FreeBSD. I have successfully edited the grub menu.lst file to boot into either, but i would like to select my choice from another machine running Win7 using Putty ( Since I only have one monitor and keyboard!
Once my workstation loads the grub, presenting the options of OS's, is there a way using putty or some other software GUI on my Win7 machine to see that grub menu and then select which OS the workstation should boot into? ( ESX 3.5 or FreeBSD - This would come in handy so I dont have to disconnect my monitor, keyboard and mouse each time just to select the desired OS!!!)
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
View 10 Replies View RelatedI am trying to dual boot Fedora 13 onto my Windows 7 machine. I have shrunk my Windows drive to create 100GB of unpartitioned space, but when trying to install Fedora onto this free space (it is recognized as "Free" space), the installer tells me that there is no space for the partition.
View 5 Replies View Relatedi could not change the sequence of dual booting from the grub menu.lst, due to it shows a blank screen when i put the command in the terminalayan@jayan-desktop:~$ sudo gedit /boot/grub/menu.lst [sudo] password for jayan:
View 6 Replies View Relatedi'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I'm not consistently able to boot into Ubuntu Lucid on my new dual boot (w/ Win7) setup. Machine is a Dell XPS 1645 laptop. Usually it takes 1-3 tries of hard shut down and restart before the OS starts up. Boot info script results are below. Windows starts up fine everytime. What I usually get is this: Dell startup screen, then Grub2 menu, then after selecting Linux kernal a blinking cursor at upper left of monitor and it just hangs.
View 9 Replies View Relatedi have lucid lnyx installed as my main system and added natty on a seperate drive. after installing, the new grub detected lynx & i was able to boot into each without any problem. after doing some tweaking on natty (changed run level), it didn't boot properly so i reverted to the old config via rescue disk. after rebooting, the old grub menu didn't show & it loaded lynx automatically.
i tried the suggestion from another post changed the hidden menu and updated grub but it didn't detect natty (below).
------ update-grub ------
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-31-generic
Found initrd image: /boot/initrd.img-2.6.32-31-generic
Found linux image: /boot/vmlinuz-2.6.32-30-generic
[Code]....
I've been trying to get a dual-boot system with a truecrypted Windows partition and grub 2 in combination to work successfully and to date, I haven't had much luck. I'm using the grub 2 version from Ubuntu 10.04.2 LTS.I understand from searching through Google that there is presently no easy way to chainload the Truecrypt boot loader from Grub 2 in a similiar way that was done with Grub 1. This is because the Grub 2 payload is much larger and actually overwrites some of the Truecrypt boot loader, preventing it from starting.Does anybody know what might be going wrong here? I've been looking for ages now and can't seem to find any solution to this problem apart from restoring the Truecrypt loader to the hard disk and trying to chainload Grub 2 from Truecrypt. I'd rather use Grub 2 as the main loader though as Ubuntu Linux will be the main operating system in use.
View 7 Replies View RelatedMy laptop setup is:
sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)
now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:
Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda
Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.
Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda
The latter fails with
Code: Select all/dev/sda/proc not a directory
My friend recently installed ubuntu to his existing computer which had windows XP. Today when he tried to start the PC it showed the error
[Code]...
I have installed the latest Fedora on an external (USB) hard drive. Is it possible to alter part of the program so that I can run this external hard drive on any machine regardless of it's operating system?
View 4 Replies View RelatedI have a 2008 white MacBook.Dual booting Mac OS X and 11.3?
View 1 Replies View RelatedI was trying to install a dual boot with OS X and this is what it told me:
"delete partition /dev/sda1"
As far as I can tell, this means it wants to delete OS X. On my mac's terminal, the linux partition is "disk0s3". Am I correct to assume that I should be custom partitioning in the OpenSUSE installer and have it create all its partitions out of sda3 only?
I am starting this as I am getting bit desperate. I have installed Windows XP virtual machine. As it created partition, formatted it, and copied files it started to reboot and i got message �A disk read error occurred press Ctrl+Alt+Del to restart� I tried also boot from CD, but I got �Booting from CD-ROM... Boot failed, could not read from CDROM (Code001). It seems that it is not even spinning the CD. I have also noticed that there is no CD/DVD drive listed in virtual machine details. Although, there is boot option to select CD as a device to boot from. There are probably two separate issues, booting from HDD and not detecting CDROM. However I installed the same virtual machine on Fedora 12 without any problems and just cannot solve this
View 3 Replies View RelatedI found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies View RelatedJust sucessfully installed a sual boot with 11.2/ubuntu 10.4. 11.2 was installed first, than ubuntu. ubuntu recognizes and displays 11.2 on its bootloader, 1..2 does ot show ubuntu on its boot menu. so this mean I have to edit menu.lst and physically add the menu entry (root, load the kenel, and load initrd)....correct?
View 9 Replies View RelatedI Installed fedora in Virtual PC after adding the line while booting as shown in the forums. But after installing to the hard disk, The Fedora virtual machine is not booting. The window closes without any notice automatically.
View 12 Replies View RelatedI want to try OpenSUSE but don't want to get rid of Ubuntu yet. How can I install it so I will be able to dual boot? I have an empty partition of ~150GB ready for it.When I am installing OpenSUSE 11.3 I get this content in the boot section:
Code:
The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot.
[code]...