I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
View 2 Replies
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies View RelatedI just installed Ubuntu 9.10 CLI with Openbox as the WM on my Dell laptop. I installed gnome-power-manager because I like to suspend my laptop when the lid is closed. When the close the lid and reopen it, the screen is black and the computer never suspends. This happens regardless of whether or not gnome-power-manger is running is the background.
View 4 Replies View RelatedI have Ubuntu 10.10 installed on a laptop. The laptop has an external 19" screen connected to it through the VGA port. I am not using the laptop screen (because it is small and flickers constantly) but only the external screen. When I shut the laptop lid the external screen blanks. There is no option in the power management dialog and the option "Activate screensaver when idle..." in the screensaver dialog is unchecked (which I would like to re-enable to blank screen when idle for x minutes). How can I get Ubuntu to leave my external screen on when the laptop lid is closed?
View 1 Replies View RelatedI'm a little surprised that I haven't seen any other complaints about their MacBook only going up to a resolution of 1280x800. Does anyone have a configuration for higher resolutions or have any insight into how it might be possible to obtain them? It works in Mac OS X, so it should certainly work in Linux.
View 2 Replies View Related[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
View 1 Replies View RelatedI have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
imac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies View RelatedI installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies View RelatedI downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedThe highest I see is kernel_task at 362 mb.
I was running Cafe World with the latest Google Chrome and I doubt that Cafe World would use 7 gigabytes of ram.
I've got a Macbook Air and a verified 9.10 liveCD in the external superdrive. I can successfully boot to the CD, but when I choose "try ubuntu without installing", all I get is a blinking cursor in the upper-left of the screen forever. Any idea why it won't start? CD works fine on my Dell, that's why I say it's verified.
View 7 Replies View RelatedIs there any way to switch to the nVidia 9400 controller in Ubuntu 9.04 on Macbook 5,1?
When i run lspci i can't see the 9400 controller code...
Today i went ahead and installed ubuntu on my windows desktop pc. I tryed the live cd and tested it out and everything was fine i then installed it using wubi. I then wanted to install it to my macbook ( bought in june 2009 ) and i booted the live cd and chose try ubuntu without any change to your computer. It booted a black screen with a white _ at the top then the screen went white and did nothing. I tryed it several times and nothing happend. I then said ok il maybe just try install it through wubi on my bootcamp partition and it all went fine until i got to the windows bootloader and chose ubuntu, it camp up finishing linux installation and where its meant to change and show the ubuntu symbol after ( i know because i've installed ubuntu on the pc) the screen went white. Nothing.
View 9 Replies View RelatedI have a first generation Macbook that shipped with Tiger. I don't often use the os x partition anymore, as I installed Windows XP on a 15 gig partition back when bootcamp was still in beta and I normally use that when I'm on my laptop. Since Tiger is rather old and the only reason I would want to upgrade to leopard is to have access to bootcamp again (they disabled access to the bootcamp application in os x, but I can still boot into windows), I have been thinking about wiping out my os x installation and using ubuntu instead. Does anyone have any thoughts on the pros and cons of totally removing os x?
The main reason I hesitate to just jump in and do it is because if I decide to install os x again I won't be able to install bootcamp again, unless I buy leopard. If I wipe out os x and install ubuntu, will I still be able to access windows in the same way? Windows uses bootcamp drivers to run properly, so I have never quite been sure if it is pulling something off of the os x partition or if it is totally standalone.
I have a macbook5,1 with ubuntu 9.10 on it. Does anyone got wake-on-lan working on this type of machine (or any other intel macbook?)
At startup, ethool sets the wake on lan parameter. I tried sending the magic packet with the wakeonlan utility.
I have just installed the latest Ubuntu 10.4 LTS on my Macbook Pro and the one thing I cannot get to work no matter how much i try the fixes and suggestions they do not work. I have the volume controls, even the ones on the keyboard work but there is just no audio what so ever.
View 1 Replies View RelatedI would like to know, how could I install ubuntu on Mac. I've gone through the following guide, but there is no option for my machine MacBook Pro 6.2.
Code:
[URL].. BTW, i would like to have dual-boot option with Mac OSX pre-installed.
I get through the install just fine till the end Iv tryed twice. When i get to the "Who Am I" screen i fill out all the info the "Forward" Button doesn't light up, it keeps on installing till "Ready when you are" and then i'm kinda stuck.. I can go back to past screens and edit the info and stuff but thats it can't move on.
View 4 Replies View RelatedWhen I installed I noticed no sound was emanating from my computer and a red light coming out the headphone jack. s there any reason why there wouldn't be any working sound? Everything else seems to be working fine. I installed the additional drivers but the only ones listed were graphics and wireless.
View 3 Replies View RelatedIntroduction: I wrote a very extensive and quantified tutorial and informational guide aiming to upgrade the latent information from the wiki's on MacBook Pro 5,2. An accidental toe tap ended with me bumping my head and pressing the X button on firefox. What happen had to be 1 out of a billionth of a chance. So this version will be simple and to the point, until I can muster enough patience to detail it all out again. Please correct any errors.
sudo apt-get install pommed - To get backlight keyboard working.
sudo apt-get install cheese - To get iSight working.
sudo apt-get install lirc - to get remote working (tested in XBMC)
sudo apt-get install bluemon - Pairs Mighty Mouse and Wireless Keyboard (optional)
[Code]...
I have installed it on my Macbook Pro 5.5 via rEFIt+ and the install works well except for the lack of sound. I've seen this issue posted about on the forums and I've followed the advice posted here as best I can with my limited knowledge. Terminal didn't recognise the aptitude (command not found). I guess that may be due to an older build of Ubuntu being used in the example?
View 5 Replies View RelatedI have downloaded the 64 bit iso and burned the CD-ROM per the instructions. The CD is verified. When I boot the mac, holding down the C key, I get a menu of options relating to Ubuntu. If I choose the trial run from CD then the CD drive starts up but the screen goes blank and I end up with just a blinking underline cursor in the upper left hand corner of the screen. Does anyone known if one can, and if so how, to boot the live CD on a Macbook Pro 5,2?
View 6 Replies View RelatedThe wiki says there is a way to install from usb but I can't get it to work on my Macbook Air 3,2 (the Nov 2010 revision, not the one from last week).
My goal is to dual-boot OS X and Ubuntu, but I can't get the Ubuntu installer to boot. I've tried a lot of variations on the instructions I've found, so I get the feeling I'm probably missing something fundamental.
I installed refit and used BootCamp to partition the drive. I downloaded desktop/alternate and i386/amd64 isos. I tried to follow the instructions to use unetbootin on OS X to install the ISOs to my USB drive, but neither drive that I connect appears in the "Drive:" selector when on OS X. I used usb-creator-gtk and unetbootin on an Unbuntu machine to try each of the four ISOs.
When I try to boot the Air from the USB drive, I got a few different types of failure:
gpt, single fat partition, unetbootin -> alternate amd64
result: "Non-system disk" "Press any key to reboot"
mbr, single fat, unetbootin -> alternate amd64
result: black screen, fan runs at 100% after a minute or two
[Code].....
I tried dd'ing a disk image to my new partition as described here and here with the desktop amd64 and i386 images, got a few different errors - once syslinux complaining "Error: No configuration file found" when the drive I dd'd from wasn't properly unmounted before bringing it to the Air, once I chose the drive in refit, refit displayed the single logo, and it never booted, and once I got an error I didn't copy down about needing a boot floppy.
Has anyone successfully booted Ubuntu from USB key on the Air? Exactly how did you prepare which image?
I've been trying to install 11.04 on my MacBook Pro for the past couple weeks, and I'm getting pretty frustrated with it. When I try to boot from a DVD, I either get a blank screen with just a flashing cursor, or it will ask me if I want to try, install, or verify the disc, after which I will get a bunch of different-colored blocks all around the screen.
I have installed past versions of Ubuntu on this computer with no problems, so I'm pretty stumped now on why I'm having this problem. Also, I've tried the Ubuntu Wiki and sticky thread on this forum, but nothing in either seems to help. Additionally, I have installed Mac OS X 10.7 Lion. I don't think it'd effect anything, but I thought it was worth mentioning.
