I installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I have been running Ubuntu in my iBook/g4 800, 12' inch screen since jaunty and I must confess that I have had a fair share of graphics issue, however, since karmic, my computer would just go off especially when the AC is disconnected then on plugging back the AC, it comes back on but with the windows or the previous items on the screen completely deformed, that kind of deformation you would only blame graphics for. So the deformation stays for long and a reboot is all I'm left with.While still in karmic, i thought an upgrade to Lucid would get things back in place but that never happened, so I have been wondering what to do. I thought of a key combination that would turn on the screen in an iBook but I cant seem to find that through google, so I'm left with just fixing the underlying issue which according to some post on the Internet, wrong graphics settings might cause the monitor to shut down unexpectedly. I don't know exactly what exactly am I supposed to do? If that post is anything to go by, here is my xorg.conf(I know karmic+ does not need this but my system needs it) code...
View 2 Replies View Relatedafter spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedI have an iBook G3 and about 4 months ago after Mac OSX was corrupted I installed Ubuntu 9.10 on it. During the install the screen was divided and partly blacked out but when I installed it, the resolution was fine and the OS encompassed the whole screen.
After a few weeks everything on the screen started to turn pink until all the colours on the whole screen were a shade of pink! I decided that I would abandon my laptop as I had a fully functioning Ubuntu desktop which was my preferable computer to use anyway.
Following the release of Ubuntu 10.04 I decided that I would try a fresh install on my laptop. When I started the install I was disappointed to find that the screen was divided and everything was shaded pink. I went ahead with the install regardless hoping that everything would be fine once I installed Ubuntu. Once again I was let down, the screen was still divided and pink. I have included some pictures for you to have a look at.
I have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View Relatedimac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
View 2 Replies View Relatedim running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies View RelatedI just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies View RelatedI downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedI am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies View RelatedI'm trying to install ubuntu on an old iBook G4. I have two cds (9.10 (not PPC specific) and 8.04.1 (the PPC specific version)) along with the G4 install cds. I've tried booting while holding down C, and I've tried to boot holding down option. When the boot menu comes up it does not recognize either one. I've also reset the PRAM.I've read a lot of guides, and look through this very thoroughly. I don't even want to dual boot, just Ubuntu.
View 7 Replies View RelatedI thought it would be great to update to the latest version of ppc ubuntu on my old ibook g4, so i did just that. Everything seemed to install correctly, and the broadcom driver was properly detected and downloaded...however...when I connect to my wireless network, I can't get any data flow. No web pages, no connection to empathy...nothing.verything worked so flawlessly in 9.10, and I had just been using the wireless connection before I installed 10.04, so I know the hardware is fine
View 3 Replies View RelatedI have an ibook g3 that I'm trying to resurrect with Ubuntu 10.04. However, booting into live CD always freezes it at some point in the installation process. I got it installed but everything takes five minutes to open. any way to make it faster?
View 4 Replies View RelatedI have an old ibook g4. I was trying to install 10.04 on it. It booted from the cd,but when I installed ubuntu there were 2 or three error messages near the end that it couldnt delete some files. When I restarted, the computer went fine, until it got to a black screen with white text, which said it couldn't find files and said it would reboot in 180 seconds. I let it, and it just ended up the same. Did I trash my computer?
View 2 Replies View RelatedI want to install Ubuntu on my ibook G4 (I don't care to have a dual boot) but I can't find a simple and concise set of instructions here.
View 3 Replies View RelatedI just installed ubuntu 9.10 on my ibook G4 and now i am wondering: how would i compile .java files and run then in xterm? What packages would i have to install? What commands would i use to do the compiling and the running? Would i use the gcj
View 1 Replies View Relatedso after install several different versions of ubuntu on my ibook g4 I finally got xubuntu jaunty up and running. the problem is it wont update anything when i run sudo apt-get update it fails to fetch anything from the repos. also when i go to aplications software sources it wont let me check the important security updates tab at all.I installed ubuntu hardy on my g4 powermac and that runs just fine but it doesn't work correctly on my ibook so i would really like to stick with jaunty but i cant seem to find a solution.here is my sources.list
# deb cdrom:[Xubuntu 9.04 _Jaunty Jackalope_ - Release powerpc (20090423)]/ jaunty main
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[code]...
So I recently installed Ubuntu 10.04 on my 800 MHz iBook G4 with a Radeon 9200. After messing around with the xorg file, I was able to get compiz working well - but now the only problem I'm having is that scrolling in any window is ridiculously choppy - comparable to scrolling a window of a computer over remote desktop.
View 3 Replies View Relatedhow to compile my own kernel for a ibook g4 and when you install it all works, because more and I compile everything but the audio worked, nose on me but I'm not mistaken at the sound card detected. I can do where there is a good manual?where can I get a kernel to this machine and it compiled?
View 1 Replies View RelatedI was easily able to install Ubuntu 10.04 (powerpc version) on my old iBook G4 just to see what it was like. After installation, I tried to connect to my Airport Extreme, and it didn't work.
For the past few days, I have been trying to research how to be able to connect to my Airport Extreme, and I have had no luck. Apparently, there is some sort of driver that I have to install called b43-fwcutter, but I have no clue where to find it or how to install it.
Btw, the iBook obviously isn't the only computer I have, so I am able to download necessary packages on other computers, and transport it with USB flashdrives.
I was fiddling with trying to get KMS working for about a week till I realized that it was probably broken and decided to drop it and use userspace DRI. Lo and behold, it was faster than I think I've ever gotten out of this model before. I'm aware that KMS supposedly supports the Mobility Radeon chip in this machine, but until I can find an easy way to get it to work, I'm probably going to stick with UMS. That being said, if anybody can get KMS working, I'd LOVE to change the tutorial around a bit.That being said, I'd like to take a moment to address a few things. This is not a tutorial for all iBooks, or all PPC Macs for Lucid. I cannot stress enough that your mileage may vary, and you should not hold me responsible for your individual situation.
View 9 Replies View RelatedI have an old iBook G3 12" Dual USB (M7692LL/A) with 128Mb extra of RAM.
I was trying to boot Ubuntu from an external USB DVD and a FW CD drive, and the same thing happened. When I select the disc from the boot select screen and press enter, the colors get funky and it stays like that for minutes!
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies View RelatedI am having trouble finding a live cd to install on an apple g3 ibook. I have 256 mg ram, and want to erase hard drive and install linux. How can I find a live cd to install. I am thinking about debian or slackware.
View 2 Replies View RelatedI set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View Related