I have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedI have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
Screen brightness on aluminium 24 inch Intel iMac
I was just about to re-install Ubuntu to dual boot with OS X on my 24 inch aluminium Intel iMac. Then I remembered the reason I got rid of Ubuntu the last time... screen brightness.
It is a known fault of these machines - the default brightness is set far too high. Sometimes it hurts the eyes. There is an application I have to use with OS X called 'shades'.
If I instal Ubuntu in VirtualBox I can still use 'shades', but when I run it natively as a dual-boot os, I do not have access to the 'shades' app so the screen is far too bright to use for any reasonable length of time.
Is there a workaround for this, without having to do something on every log-in?
(I am using the 64 bit AMD version of Ubuntu.)
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedI'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View Relatedimac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
View 2 Replies View Relatedim running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies View RelatedI installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies View RelatedI am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies View RelatedI run lucid lynx 10.04 beta (live) on an iMac G4 800MHz flat screen. How do I partionate an 80GB HDD?
In gparted I see 8 very smal partition exept the hfs+ partition. I have thrinked the hfs+ partition and made a 1GB swap, approx 50GB /home and 5GB /.
When I try to install Ubuntu say I need a new world partion for the boatloader. How fix it? first it say I need 8MB, then 1.8GB!
Is it 'newworld' or 'New world start partition' and what should bee the mount-point?
I just installed the latest version of Ubuntu on my intel-based iMac with OSX 10.6 (Snow Leopard), but I don't know how to bring it up.
I partinioned my hard drive for it. I inserted the CD and pressed C when restarting my computer for it to come up, then I installed it on the partition. It was done installing and said the computer must restart now, so I pressed OK. I got a black screen with a bunch of white text saying something about an error. It was pretty much "frozen" (I didn't know how to get off the screen), so I turned off the power manually by pressing the power button. I turned the power back on, but I get no option for Linux. I tried putting the CD back in, and it boots from the CD but it's still the non-installed version. So I thought maybe it didn't install, so I pressed install again. It said to choose where to install it, but my partition of free space said Ubuntu was already installed on it.
I'm really confused and don't know how to get it to start up when I turn on my computer.
EDIT: Here's some more info about my mac incase you need it:
iMac
OSX 10.6 Snow Leopard
Intel
4 Gb of RAM
250 Gb hard drive (29 Gb partitioned for Linux)
I have an early 17" imac G5 PPC, only 512mb RAM. Been looking at the PPC linux distros available, and xubuntu 10.04 looks good, does anybody run here on an old Imac? Will just be a backup pc.
View 7 Replies View RelatedI remembered about my old iMac G3 and currently had OSX 10.2.8 installed on it but its too old to support flash so no ..... or anything (why I stopped using it) I do remember gnash working on it along time ago when I had Ubuntu 4.10 installed, gnash is just really glitchy but that was quite a long time ago I used it so I'm only assuming they have made some updates as Ubuntu progressed.
I tried have now tried 4.10, 6.04, 6.10, 7.10, 8.04, 8.10, and 10.10 all for ppc using the alternate installer cause the desktop installer just makes the iMac restart when I tried it with 8.04 I think it was so I just stuck with the alternate installer method and EVERY one of those versions of Ubuntu fails to install the base system..
I don't know what it is or why this is happening because that is the same disc I used before with 4.10 and it now cant find a file, I tried re downloading 4.10 and burnt it again on my dads laptop (Toshiba Satellite with Ubuntu 10.10) at 8x on a CD (the iMac has a CD ROM only). I can't figure out what to do, I just downloaded the Desktop installer for 10.04 and the alternate installer for 10.04 as well and I'm going to burn both of those and see what happens.
Every install I tried to do I did a full whip to the hard drive so its a fresh install of ubuntu only. I thought maybe something was wrong with the hard drive now so I tried 10.2.4 again and it installed fine and wanted me to update to 10.2.8 again so I turned it off and tried 10.10 again and nothing is working. It's going on a week soon I've been messing with this old computer trying to get it working and everything is failing on me
I decided as ubuntu 10.10 was so good on my old laptop i would install it on my old G4 iMac 17" LCD.
However, All I ever get is a black screen.
i tried the alternate install and it all seemed fine until it reboots and.... Black screen!
I burned the ubuntu 10.10 desktop ppc cdrom nice and slow, checked MD5 sums and verified disk etc...
I put it in the cd tray booted up, and let it start the lice cd... For a split second I saw the ubuntu loadscreen before it disappeared in a hiss of static and went to a.... Black screen.
I've tried alt-command F2, but don�t get a console
i am at a loss as to what to do next. I partitioned the whole HDD for ubuntu during the alternate istall. So until i can get Ubuntu up and running, I have a very heavy paperweight.
my partner and I have been trying to wipe the mac os 9.2.2 (UK version) and replace with ubuntu 7.04 (previous forums have mentioned this is the most stable version of ubuntu for the G3).
We bought this iMac G3 the other day, cheap, for our sons room... homework, research, music etc. He's used to the windows system that the Mac os looks both boring and confusing to him. so we thought we'd go in between and use the ubuntu os.
Any who! downloaded the iso for ubuntu 7.04, burned the iso image, alternate cd install of course. the only problem we are having is getting the disc to boot at start up on the iMac. (cd rom doesn't have a tray, I've seen this question asked before). the cd burned fine, the disc works on other systems. but when it comes to boot up on the iMac, nothing happens. press and hold down c, cd drive turns the discs a few times then carries on with the original mac os 9 start up.
Does anyone know if ubuntu 10.10 will work on an imac g4?
View 3 Replies View RelatedI can't install any flavour of Ubuntu 9.10 onto my new iMac G3. Here are its specs:
iMac G3 New World (Indigo)
350MHz G3 Processor
192MB RAM
6GB Hard Drive
Slot Loader (CD only - not DVD)
Mac OS 10.3 Panther
The drive does work - I've played music from CDs on it, and it does allow me to view PDF files stored on data CDs. I can even view the Ubuntu CD through the Finder on the desktop. It just really doesn't want to boot from the CD.
I've tried multiple Linux distributions (all of them PPC compatible).
I want to install Ubuntu on a PPC iMac.It is running 10.2.8.I'm looking for a ppc version of Ubuntu that will fit on a CD-R, the iMac has no DVD reader.Where can I find this?Also, I'm not sure how to get the iMac to boot from disc. It doesn't seem to respond to holding 'c'. Also, when I hold 'option' during boot up it shows me a screen with a picture of a lock, it wants me to fill in a password, but my user's password won't work.
View 9 Replies View RelatedIt seems that there is no "safe graphic mode" or similar when running the live cd.I only get a blank screen.
View 9 Replies View RelatedI installed 9.10 and the graphic driver for the ATI video card. After reboot all was ok. Then I run a system update, it found almost 250 packages to update. After installation, rebooted machine and it hangs on boot.
View 1 Replies View RelatedWell, I can't get audio on an iMac 27" at 3.06 GHz with Ubuntu 10.04. I have FGLRX ATI/AMD driver, but that's just for 2560x1440 display res. and don't give audio.
View 3 Replies View RelatedI am finally coming around to selling my iMac G3s and eMac. I will reformat the drives in them and put on Puppy Linux for the iMacs and Xubuntu on the eMac. If I can, I will repair OS X on them all and will dual boot if possible. All of this will be done using the Intel iMac via Firewire. I would like to know if there is a way to make these machines any faster (without money) and "safer" so the next owner feels sure they won't be failing on them soon.
View 1 Replies View RelatedI presently have an iMac G4/700Mhz machine I want to try Ubuntu on, but I cannot get it to boot using the 10.04 PPC Live CD. I get to the boot prompt, and no matter what I type, the system halts when the screen clears and comes up, and each time it does so, it comes up different colors (I've seen green, red, yellow, and grey so far). I've tried the special boot arguments that apply to this system when you press the TAB key, and all of them end the same way, so I'm at a wee bit of a loss here.
View 5 Replies View RelatedHere's the next problem I'm running into. I successfully installed Ubuntu using the Alternate disc. It's set up as the only OS, I let the installer configure the internal drive, etc. I don't need OS X on this machine anyways. I'm back to the graphics issue again.The system turns on, fires up YaBoot, starts up the Ubuntu install, but then hangs as soon as it goes to do something with the display adapter, producing a random blank screen in a particular color, and just stops there. I looked to see if there were boot options at the YaBoot prompt, but all it gave me were "Linux" and "Old".
View 1 Replies View RelatedAfter few days of Googling, downloading and testing, I've finaly managed to make a working Xorg.conf for my iMac G3 (Slot-loading, Summer 2001). As many of configs found on the Internet wasn't working for me, I'm posting mine, which is based on data from many configs (some from Ubuntu 8.04, were not working on this new release without adjustments).
Code:
I'm trying to boot ubuntu10.4 live CD on my new iMac (iMac 11,2, core i3). The screen goes black at start of boot and stays black. The CD stops reading after a few minutes and that's that. Just to see what else doesn't work I tried ubuntu10.10 beta live DVD. That boots the splash screen - already better than 10.4 - and gives the language menu and the boot option. The boot starts and some text scrolls up the screen quickly. Then the screen goes black, etc. Tried to set boot option vga=771 - no good. Boot option nomodeset - no good. Booting suse11.3 live CD also gives scrolling text and a black screen. All these discs worked on my old Mac Mini Solo (2006). Looks like something's different about booting a live CD on the new iMacs. Anyone else trying this?
View 6 Replies View Related