Slackware :: Where Is The Config File For Tty

Jan 1, 2011

i've been wondering what's up with the tty's in slack. [ctrl]-[alt]-[f1-f5] don't seem to work for CLI consoles, and [ctrl]-[alt]-[f8-f10] don't work for X. where's the config file to change this?

View 2 Replies


ADVERTISEMENT

Slackware :: Iptraf-ng Cannot Create Config File

Mar 12, 2011

iptraf-ng is missing /var/lib/iptraf . Without this directory you cannot change the options.

View 1 Replies View Related

Slackware :: How To Save Needed Modules Config To Create .config?

Apr 9, 2011

I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.

My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)

View 5 Replies View Related

General :: Using A Config Directory Instead Of A Config File?

May 7, 2011

I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device

config
<?xml version="1.0" encoding="utf-8" ?>
- <config>

[code]...

View 1 Replies View Related

Fedora :: Display The File On The Gnome Desktop Without Messing Up The KDE Config File?

Jan 4, 2010

New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?

View 2 Replies View Related

Ubuntu Multimedia :: Where Is Association Config File For File Extensions?

Aug 7, 2010

I'm using Ubuntu 10.04.1 LTS (Netbook).I need to associate ram file extension to realplayer. First time I opened a ram file I choosed the default player, Reproductor de peliculas (I think Movie player in english).Now when I choose Open with Realplayer and remember the application for this extension it opens the archive but it does not remember for the next times. It seems to be a little bug. How can I do it manually? Where is the association config file for file extensions?

View 2 Replies View Related

Slackware :: Get A Copy Of The 2.6.33.4 Generic Config?

Sep 3, 2010

Where can I get a copy of the 2.6.33.4 config that comes with Slackware? Also, can I get a binary of the kernel, the one that comes with Slackware 13.1?

View 14 Replies View Related

Slackware :: What About Config Files During Upgrade

Nov 13, 2010

During upgrade the system ask me what to do about config files. K to keep old ones then other options to change config files to the new system and backup old one with *.old extension and 2 other options I don't remember. What do you think is the best choice if I have changed my xorg.conf, my layout and my fonts.

View 2 Replies View Related

Slackware :: [Bug] Qtconfig Does Not Load Config On Startup / What To Do?

Apr 17, 2011

The program "qtconfig" does not load saved config on startup.

I just installed slackware-current from today's update (mirrored from ftp.slackware.com). The program "qtconfig" seems to have saved my changes to "~/.config/Trolltech.conf". However, after restarting qtconfig all options become the defaults.

I verified this in both the C locale and a UTF-8 locale.

Another computer of mine has a -current system from a few months ago and doesn't have this problem.

View 2 Replies View Related

Slackware :: How To Customize Konqueror Browser For About:config

Apr 2, 2010

Typing about:config from konqueror,get nothing.How can i change general.useragent.extra like firefox?

View 4 Replies View Related

Slackware :: Slap DVD Laptop Kernel Config

Sep 8, 2009

This is my first effort in making something more appropriate for laptop users (exclusively). This is a kernel config for 2.6.30.5. I started with the Slackware Generic-SMP 32bit kernel config (this is a 32bit kernel config). All credit for (in my opinion) the best starting place for any kernel config goes to Patrick Vokerding. (Please tell me if I am or am not doing this properly in terms of respecting the work of others, GPL, GNU, etc.)

View 14 Replies View Related

Slackware :: Use Either Iwconfig Or Wpa_supplicant And Edit The Corresponding Config Files?

Jun 3, 2010

My brother is thinking of installing Slackware64 13.1 on his laptop. He was wondering though how to configure his wireless card. How would he do this? He is using an Intel wireless card, but I am unsure of the exact model. Another question is would Wicd do this automatically or do you still have to use either iwconfig or wpa_supplicant and edit the corresponding config files?

View 4 Replies View Related

Slackware :: Error: The Important Program Kde-config Was Not Found

Jan 2, 2010

I'm trying to install "ktranslator-0.4" on my slackware64-13.0. When I type in ./configure I get the following mesgs with error:

checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu

[code]....

View 12 Replies View Related

Slackware :: Realtek RTL8187L Wireless Config And A Different RadioPower.sh?

Feb 8, 2010

Well, at first I need to tell that after having big problems (audio, video, modem, network,...) with my venture into slack world at about 7 years ago, I thought that even with my insistence it would be hard to get used with it.
Around the middle of December last year I decided to try again and again I had face some problems (now with fdisk and GPT support in a 64 bit machine).

But now, at about a month after that, I need to say that having passed those initial problems with installation, not only I manage to learn a lot about linux in general (dependencies, rc. editing, permissions, groups...) as I am amazing to what Slackware became.
From 3D graphics acceleration in KDE (with an easy config for my video card, something I thought it would be impossible and that makes it by far better looking than any Windows Desktop fancy try), to great programs and suites integration like Amarok, OpenOffice, Ktorrent, THE firefox, and so many others all allied with the full control of the system (no automatic updates, no mysterious packages UNLESS I really allow it) not to tell g++, python and so on.

However, besides a raid 0 non readable partition, I am having a persistent problem with my wireless that always mix my pppoe connection when I try to config it via rc.inet1 (or rc.wireless ...).To better explain my situation I have a computer with Asus P5k-e/Wifi-AP with came with an integrated wireless device (Realtek RTL8187L).Also, the way I work out to connect to the internet was through (an ethernet) pppoe connection setup using pppoe-setup.Right now it is working like a charm after pppoe-start and stop commands.

At about a month, when i was starting my first steps to config my machine, I tried to follow [URL] three times, and in two of those I manage to start my wireless, but in all it mixed up with my pppoe connection and since either pppoe-config as pppoe-setup didn't work after that (even after backup the files) I had to reinstall the whole system. (Yes, I know that probably there is an workaround easier via shell or file editing, but since every time I need to restart in the Windows, search for solution on internet, print those I find, restart, and try in slackware again, I decided that reinstalling was the fast solution for me at that time.)Now, I am a bit more confident with my knowledge of the linux and decided to try to setup wireless again.

After an extensive search in the forum, I found out two major solutions: One pointing to alienwiki (with I really think is the best approach besides my previous experience) and other pointing to the proper realtek driver at [URL]As i am yet trying to decide which method use, I download the driver and it came with an strange file (RadioPower.sh) that are called by wlan0up. Below are both files:

wlan0up:

Code:

#!/bin/sh
SYSTEM=`uname -r|cut -d. -f1,2`
if [ $SYSTEM = 2.4 ]
then
cd ieee80211

[code].....

View 10 Replies View Related

Slackware :: Config Option For Usb Wifi Rt2x00 Modules?

Jan 5, 2010

I have a system using a Linksys WUSB54B usb wifi adapter that needs the rt2x00/rt2500 modules. Using the fresh install kernel, 2.6.29.6-smp, the modules are there and I get my interface up.

But, when I configure my own kernel, not an smp system, I cannot find the .config option in the menu for rt2x00 network adapter support and the modules are not in /lib/modules/vmlinuz-2.6.29.6-first directory tree after a "make modules_install".

I looked through the configuration menu, but could find no reference to the rt2x00 drivers.

View 4 Replies View Related

Slackware :: Compiling Kernel 2.6.38.6 - Config Debug Section Mismatch

May 11, 2011

Anyone able to compile kernel 2.6.38.6 on Slackware 13.37 successfully using the config from testing/2.6.38.4? I was able to get .4 and .5 to compile successfully, but with .6 I get the following after running "make modules".

Code:
WARNING: modpost: Found 11 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
Running "make CONFIG_DEBUG_SECTION_MISMATCH=y 2>&1 > outfile" gives me a bunch of WARNINGS as follows:

Code:
WARNING: vmlinux.o(.text+0xe656a): Section mismatch in reference from the function build_all_zonelists() to the function .meminit.text:setup_zone_pageset.clone.56()
The function build_all_zonelists() references
the function __meminit setup_zone_pageset.clone.56().
This is often because build_all_zonelists lacks a __meminit
annotation or the annotation of setup_zone_pageset.clone.56 is wrong.....

WARNING: drivers/watchdog/nv_tco.o(.devinit.text+0x14): Section mismatch in reference from the function nv_tco_init() to the function .init.text:nv_tco_getdevice()
The function __devinit nv_tco_init() references
a function __init nv_tco_getdevice().
If nv_tco_getdevice is only used by nv_tco_init then
annotate nv_tco_getdevice with a matching annotation.

View 14 Replies View Related

Slackware :: System All The Time Creates /.config/Trolltech.conf?

Apr 18, 2011

I am on up to date 64-current. Installed Alien Bob's multilib packages on top of it as well as his kde packages. I changed inittab to go to runlevel 4 by default.I figured out that my system all the time creates /.config/Trolltech.confI think it shouldn't be there, but even when I manually delete /.config dir, it is created again.

Code:
vladimir@darkstar:~$ ls -la /
итого 97

[code]....

View 6 Replies View Related

Slackware :: Short Cut On Ssh Keys And Sshd Config - Checks For Accuracy?

Jun 7, 2011

I just finished my third edit of an article/tutorial I wrote on setting up RSA keys in OpenSSH and configuring SSHD to be a bit more secure than a fresh out of the box install. I also removed any derogatories about sudu Linux that might have been there Anyway, since it's kind of a big deal for anyone who uses it, and could potentially lock them out of their boxes I'd appreciate any comments related to the accuracy of the instructions, if you don't mind [URL]

View 10 Replies View Related

Slackware :: Wireless Interface On Eth1 - Setup Config Files?

Aug 23, 2010

All rc.inet1 an rc.wireless scripts work well if a wireless extension is on wlan(x). My notebook has Intel Pro 2100 wireless adapter (the ipw2100 module). By the system the card is marked as eth1. If you have a look at rc.inet1(.conf) you see that by default an eth1 has no wireless extensions. how to set up my network.

View 2 Replies View Related

Slackware :: Compiled A 2.6.35 Kernel With A Couple Of Different .config Files And Never Had It Boot Properly?

Oct 14, 2010

The new 2.6.35.7 kernel fails to boot on my Lenovo laptop. I had previously compiled a 2.6.35 kernel with a couple of different .config files and never had it boot properly. The failure occurs very quickly and I am including the final screenshot in case that helps.

View 7 Replies View Related

Slackware :: Delete All .orig Config Files After Slackpkg Update Process?

Dec 8, 2010

How do I delete all the .orig config files after I go throught the following process?

slackpkg update
slackpkg install-new
slackpkg upgrade-all

View 3 Replies View Related

Ubuntu Installation :: How To Load Kickstart Config File - Refuses To Load File / Launches Generic Install

May 6, 2010

I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.

View 1 Replies View Related

Slackware :: Vbox Guest Additions - Proprietary Version - Fail With - Currents New Kernel Config

Mar 11, 2010

Experienced that building the vbox guest additions (on the binary/non-free vbox) on a slackware --current guest (with windows *and* linux as a host) fails now with the new kernel's just released in --current?

View 7 Replies View Related

Ubuntu :: No Such File As Config.log?

Mar 29, 2010

How do I view a config.log file?

When I enter ls config.log is listed.

When I type 'type config.log' it says no such file as config.log !!

View 1 Replies View Related

Ubuntu :: Xmodmap Config File?

Jun 24, 2011

I'm trying to learn swedish, and I want to remap some of my key to be able to write the special chars. xmodmap -pke" gives me the current config, and most of lines are like that (6 keysyms) :

Code:
keycode 24 = a A a A adiaeresis Adiaeresis
But I actually can't access 2 of them, the #3 and #4.

[code]....

View 2 Replies View Related

Red Hat :: Install A Config.mk File In Fedora?

Mar 3, 2011

I have a cd containing wifi drivers, but inside is a config.mk file and no configure file. so when I tried to install the tarball using ./configure it could nt find anything. so I tried using su - then I said sudo ./config.mk and it said bash error I don't have premission and it referenced the sudoers file. I not sure what this means, and am I even installing the right file for the driver I need. there is also already a Makefile in the folder as well....

View 2 Replies View Related

General :: Config File For New Remote?

Jun 3, 2011

i want to create new config file for remote using irrecordbut what are the steps please tell me about thathow to save config file?

View 4 Replies View Related

General :: Retrieve Config File?

Jun 21, 2010

This is gaurav. I have lost/override the old configuration (config file) while compiling the new kernel resulting in my internet connection failure. I have tried re-booting the pc, the only escape (somewhat weired) i would thought of, still it does not restore the original.

View 4 Replies View Related

Debian :: RIPIT Can't Find The Config File?

Jan 20, 2011

I've installed RIPIT 3.6.0-1 for Lenny and have been following this tutorial to define a config file that saves all my options and which I can call every time I want to rip a CD [URL]

Following that tutorial I copied the config file in etc/ripit/config to the new director ~/.ripit/config. The new directory and file exist as I can see them when I do ls -a and can edit the new config file.

However when I type the command ripit all I get is the error message No config file found!

View 1 Replies View Related

Fedora :: Edit Sudo Config File

Mar 3, 2011

edit the sudo config file to allow my account to use some commands as a root.so can someone advise me how should i do it.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved