I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
I'm trying to compile a program from source. When I run make the following appears:./ config. status --recheck make: ./config.status: Command not found make: *** [config.status] Error 127.There is no file called config. status in the current directory. Why was it not created?
View 1 Replies View RelatedI was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
i want to create new config file for remote using irrecordbut what are the steps please tell me about thathow to save config file?
View 4 Replies View RelatedThis is gaurav. I have lost/override the old configuration (config file) while compiling the new kernel resulting in my internet connection failure. I have tried re-booting the pc, the only escape (somewhat weired) i would thought of, still it does not restore the original.
View 4 Replies View RelatedCreate a config file for Apache and this what I need to put and modify to meets my settings
NameVirtualHost *:9091
<VirtualHost *:9091>
DocumentRoot /var/www/trac/my_project
ServerName my_server_name
[Code].....
Do I simply add this within the /etc/httpd/conf/httpd.conf
if not how would I go about doing this
I want to edit the config file of an application I have installed and the documentation says that the config file is per-user and therefore stored in "~/". Which folder is that? The app itself is installed in "/usr/local/bin/".
View 5 Replies View RelatedHaving a problem in my awstats, I'm a little lost to were to edit the config file to show all IP's and host so far its only showing up my IP and the PC's on my network and nothing else.
View 5 Replies View Relatedi have the following graphic card:Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) i think appropriate drivers are installed at the time of installtion! but the compiz (desktop effects) are not working! i have installed nvidia-settings! it says: You do not appear to be using the NVIDIA X driver. edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. then i tried to run "sudo nvidia-xconfig" but it says"command not found!
View 1 Replies View RelatedI plan to use newsbeuter for console RSS reading.This program has a config text file where I need to store my Google account password,in order to access my Google reader.I don't feel easy at making my password readable to everyone.Is there anyway I can somehow encrypt this information ?
View 1 Replies View RelatedI have a config file called hosts.cfg.
It contains entries like this:
Quote:
There are many more of these entries in the file, over 500, all in this same format: each host has a "define host" followed by 18 directives contained in squiggly brackets.
If I want to know all the hosts that are in the hostgroup called SERVER_GRP, I suppose I would need to read every hostgroups line (8th directive in squiggly brackets) that contains SERVER_GRP and output the corresponding host_name line (1st directive in squiggly brackets) from that entry.
I have a few questions to ask, so please pardon me
1) How to check for https in commands config file for Nagios? I only know how to check for http, not sure for https.
2) The log file in Nagios, is it possible to extend Nagios's plugins (or are there already have plugins existed) so that we could actually make use of the log file to check for status of each and every services in different hosts, instead of looking through the log file manually which can be very time-consuming if the list is very long.
I am currently using a command like this to remove blank lines and lines which contain (not necessarily begin) with a #. Is there a better/simpler command?
cat /etc/apache2/default-server.conf | sed /^$/d | grep -v '#'
I want to start empathy with a different config directory, but I cannot find how to do it. For example, with Pidgin I used to do it doing 'pidgin -c path-to-folder'. Does anybody know if it's possible?
View 2 Replies View RelatedI'm trying to create a backup script. For my second version, I want to make a GUI that will ask the user three things:
1. which folders should be excluded
2. where to store the backup
3. the user's email
I need to store this input, and later input the values into variables in my script. How do I go about doings this?
let me know where is iptables rules stored?
View 2 Replies View RelatedI recently got involved in a project which uses brain-dead GNU indentation style.
So I need to set vim to 2-char tabs when working on that project, but otherwise I want to keep my original configuration.
Is there a way to have options in .vimrc that depend on the current working directory, so I don't have to switch back and forth manually?
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View Relatedi am trying to use /etc/sysconfig/dhcpd to specify alternate config directory. My file looks like: # Command line options here DHCPDARGS=-cf /etc/dhcpd/dhcpd.conf
View 3 Replies View RelatedI'm new to ubuntu (installed 3 days ago). I have two disks in my notebook - one hdd (big, 320GB) and one ssd (very fast, 120GB). Everything is on ssd now, but I want to know how can I split my home directory to make config folders (like .thunderbird, .mozilla, .purple) to use ssd (for very fast response), and put movies, pictures, downloads and other folders to use hdd (a lot of space). Simply mounting hdd as /home is not a good option, becouse config files would be on hdd also. Should I mount (or link) all folders like /home/username/Videos to hdd, or is there a better solution?
View 6 Replies View RelatedI recentled upgraded all the packages on my server and now I have an issue where I can't get any thing to install or uninstall do to errors, This is what I get:
praetorian@praetorian:~$ ps ax | grep dpkg
7330 pts/1 Ss+ 0:00 /usr/bin/dpkg --status-fd 21 --configure bind9 cups cups-bsd
7331 pts/1 S+ 0:00 /usr/bin/perl -w /usr/share/debconf/frontend /var/lib/dpkg/info/bind9.postinst configure 1:9.7.3.dfsg-1ubuntu2
[code]....
New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?
View 2 Replies View RelatedHow do I view a config.log file?
When I enter ls config.log is listed.
When I type 'type config.log' it says no such file as config.log !!
i've been wondering what's up with the tty's in slack. [ctrl]-[alt]-[f1-f5] don't seem to work for CLI consoles, and [ctrl]-[alt]-[f8-f10] don't work for X. where's the config file to change this?
View 2 Replies View RelatedI'm using Ubuntu 10.04.1 LTS (Netbook).I need to associate ram file extension to realplayer. First time I opened a ram file I choosed the default player, Reproductor de peliculas (I think Movie player in english).Now when I choose Open with Realplayer and remember the application for this extension it opens the archive but it does not remember for the next times. It seems to be a little bug. How can I do it manually? Where is the association config file for file extensions?
View 2 Replies View RelatedI'm trying to learn swedish, and I want to remap some of my key to be able to write the special chars. xmodmap -pke" gives me the current config, and most of lines are like that (6 keysyms) :
Code:
keycode 24 = a A a A adiaeresis Adiaeresis
But I actually can't access 2 of them, the #3 and #4.
[code]....
I have a cd containing wifi drivers, but inside is a config.mk file and no configure file. so when I tried to install the tarball using ./configure it could nt find anything. so I tried using su - then I said sudo ./config.mk and it said bash error I don't have premission and it referenced the sudoers file. I not sure what this means, and am I even installing the right file for the driver I need. there is also already a Makefile in the folder as well....
View 2 Replies View RelatedWhat config file do you change to change default run level???
View 3 Replies View Related
