Red Hat :: Install A Config.mk File In Fedora?
Mar 3, 2011
I have a cd containing wifi drivers, but inside is a config.mk file and no configure file. so when I tried to install the tarball using ./configure it could nt find anything. so I tried using su - then I said sudo ./config.mk and it said bash error I don't have premission and it referenced the sudoers file. I not sure what this means, and am I even installing the right file for the driver I need. there is also already a Makefile in the folder as well....
View 2 Replies
ADVERTISEMENT
Jan 4, 2010
New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?
View 2 Replies
View Related
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
Sep 3, 2010
I have a question during a new kernel compilation (I made a backup of my .config) file) However I ran into issues during the make oldconfig process and unfortunately I issued a make clean followed by a mrproper which cleared my existing .config file.
Since I have a backup of my previous .config file is there of restoring without changing the permission rights to file?
-r--r--r-- 1 root root 27754 2010-09-03 22:39 /proc/config.gz
View 4 Replies
View Related
May 7, 2011
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
View 1 Replies
View Related
Jul 9, 2010
I installed fbpanel with sudo aptitude install fbpanel, but I can't find the config file. according to the readme it's suppose to be under ~/.config/fbpanel/default, but it's not there. Where else can it be? I did a whereis fbpanel and it's located in a few areas, but no default config file is there!
View 3 Replies
View Related
Feb 23, 2011
I am trying to install wxsqlite3-2.0.2 on my Debian machine. I have installed wxGTK-2.8.11 in the folder: /home/mrj2/wxGTK-2.8.11
When I run the wxsqlite3-2.0.2 configure script, a problem arises due to the fact that wxGTK is expected to be in a specific directory. The wx-config file cannot be found. However, there are copies of these files for each type of build in the folders:
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseMacUnicode
There is not a problem with my wxGTK installation as I use it in DialogBlocks and it works fine.
View 2 Replies
View Related
Mar 3, 2011
edit the sudo config file to allow my account to use some commands as a root.so can someone advise me how should i do it.
View 3 Replies
View Related
Jul 7, 2011
I have a problem with the screen flickering on fedora 15 (and lots of other modern distros, eg: ubuntu 10.10 and 11.04 and opensuse 11.4) i think it is something to do with xorg.conf as older linux distros work fine
so i added one using
Code:
Xorg :1 -configure
cp /root/xorg.conf.new /etc/X11/xorg.conf
but i still have a slight flicker. my monitor takes an input at 50-60Hz how do i set that up in the config file or is that not what is causing that? and can somebody recommend me a nice icon set for fedora
I need to add this somewhere Code: ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync in the xorg.conf no idea where!
View 3 Replies
View Related
Jul 30, 2010
i was assigned with a project to analyse the performance of ASSP mail filter engine.I am using Fedora 7 with KDE3.5. I need to install a lot of perl modules to run the assp.pl code.I was trying with all sorts of packages like src.rpm, ixxx.rpm, tar.gz, tar.bz2. All these packages doesnt work exactly. When i tried with rpm packages. I am getting this error.
/*
[root@localhost RPMs]# rpm -ivh cyrus-sasl-2.1.23-9.fc12.src.rpm
warning: cyrus-sasl-2.1.23-9.fc12.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 57bbccba
1:cyrus-sasl warning: user mockbuild does not exist - using root
[code]....
So i checked for config.h file as given the directory but it was missing.I don't know why?
View 4 Replies
View Related
Nov 24, 2009
I have a computer running Fedora 11. I wanted to use samba in my office. So I configured the /etc/samba/smb.conf ,but it did not work well : Windows can find samba,but when I tap in username and password,samba request them again , and the same thing continues in a loop. So I copied another computer's smb.conf (which is also a Fedora 11,samba runs well in this one).I copied this file to /etc/samba/ ,then samba can't satart up . I read from /var/log/samba/log.smbd.log : Unable to open configuration file "/etc/samba/smb.conf": Permission denied Even if I use: chmod 777 /etc/samba/smb.conf
why I can't login samba from Windows:
[global]
workgroup = MYGROUP
server string = Samba Server Version %v
; netbios name = MYSERVER
; interfaces = lo eth0 192.168.1.99/24
[Code]....
View 3 Replies
View Related
Jan 5, 2010
I see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.
[Code]....
View 14 Replies
View Related
Mar 1, 2010
i got this warning message while booting
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
View 4 Replies
View Related
Dec 29, 2009
I've been trying to install the gmagick extension for days now without success. I always end up with the same error message:
checking GraphicsMagick configuration program... configure: error: not found. Please provide a path to GraphicsMagick-config program.
ERROR: '/tmp/pear/temp/gmagick/configure --with-gmagick' failed
It's no wonder why I get this message as the location simply does not exists, its being unpacked to 'gmagick-1.0.3b2' and not 'gmagick'. I've tried to copy/paste the configuration file (config.m4?) to my manually created 'gmagick' directory within the temp folder but that didn't solve anything.
Command when installing:
Code:
pecl install gmagick-1.0.3b2
I'm running Fedora 12.
View 3 Replies
View Related
Mar 29, 2010
I am trying to set up a permanent resolution in the xorg.conf file. At the moment whenever I reboot the machine the resolution defaults to auto. How I can change that to be constantly at 1600x1200?
Here is my xorg.conf file.
Code: # nvidia-xconfig: version 1.0 (buildmeister@builder62)
Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "stylus" "SendCoreEvents" # Added
InputDevice "eraser" "SendCoreEvents" # Added
InputDevice "cursor" "SendCoreEvents" # Added
InputDevice "pad" "SendCoreEvents"
EndSection .....
View 2 Replies
View Related
Nov 4, 2009
Question: Where is the config file to set fixed IP in Fedora 11?I have some machienes in a classroom which I want to be able to clone. This meens I can manipulate the ifcfg-files to a fixed IP.This workes fine, but...I have 2 wireless routers (one normal and one 3G) and when I connected to the second one (3G) I used the GUI (click on the network-connections-icon in the top right corner/Connect to hidden SSID/Connected.Now I get connected! I then edited this connection using the GUI and set a fixed IP. This also works fine So what is my f problem
I want to restore the config-file for this connection from the partition that is not cloned. But where is it? I have used grep to find the SSID and the IP without any luck. Basically I wonder where are the files that make up the GUI-connections??
View 4 Replies
View Related
Aug 25, 2009
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
View 1 Replies
View Related
May 18, 2011
I have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
View 2 Replies
View Related
Feb 9, 2010
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies
View Related
Aug 9, 2009
I never upgrade from one release to the other but rather do a completely new install. How can I keep my Gnome settings from the current release and somehow impose them after a new install. I am not sure which files/hidden files I should carry, save, possibly to a USB stick or whatever and a reasonable procedure to copy/impose them after the new install is stable.
View 5 Replies
View Related
Jan 5, 2011
Been running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
View 5 Replies
View Related
Aug 7, 2010
I'm using Ubuntu 10.04.1 LTS (Netbook).I need to associate ram file extension to realplayer. First time I opened a ram file I choosed the default player, Reproductor de peliculas (I think Movie player in english).Now when I choose Open with Realplayer and remember the application for this extension it opens the archive but it does not remember for the next times. It seems to be a little bug. How can I do it manually? Where is the association config file for file extensions?
View 2 Replies
View Related
Oct 12, 2009
I keep getting this warning when booting Fedora 11: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
View 4 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
Aug 17, 2010
After a kernel update, the system always updates the GRUB menu, and the newer kernel is the default boot option.However, after an update on my F13 X64 system, the GRUB menu was updated, the config file still sets the default to "1" but if i left the automatic boot it will boot the previous kernel... am I crazy or missing something here?Here is my /boot/grub/grub.conf file:
Code:
#boot=/dev/sda
default=1
[code].....
View 4 Replies
View Related
Mar 29, 2010
How do I view a config.log file?
When I enter ls config.log is listed.
When I type 'type config.log' it says no such file as config.log !!
View 1 Replies
View Related
Jan 1, 2011
i've been wondering what's up with the tty's in slack. [ctrl]-[alt]-[f1-f5] don't seem to work for CLI consoles, and [ctrl]-[alt]-[f8-f10] don't work for X. where's the config file to change this?
View 2 Replies
View Related
Jun 24, 2011
I'm trying to learn swedish, and I want to remap some of my key to be able to write the special chars. xmodmap -pke" gives me the current config, and most of lines are like that (6 keysyms) :
Code:
keycode 24 = a A a A adiaeresis Adiaeresis
But I actually can't access 2 of them, the #3 and #4.
[code]....
View 2 Replies
View Related
Jun 3, 2011
i want to create new config file for remote using irrecordbut what are the steps please tell me about thathow to save config file?
View 4 Replies
View Related
Jun 21, 2010
This is gaurav. I have lost/override the old configuration (config file) while compiling the new kernel resulting in my internet connection failure. I have tried re-booting the pc, the only escape (somewhat weired) i would thought of, still it does not restore the original.
View 4 Replies
View Related
