Slackware :: Config Option For Usb Wifi Rt2x00 Modules?
Jan 5, 2010
I have a system using a Linksys WUSB54B usb wifi adapter that needs the rt2x00/rt2500 modules. Using the fresh install kernel, 2.6.29.6-smp, the modules are there and I get my interface up.
But, when I configure my own kernel, not an smp system, I cannot find the .config option in the menu for rt2x00 network adapter support and the modules are not in /lib/modules/vmlinuz-2.6.29.6-first directory tree after a "make modules_install".
I looked through the configuration menu, but could find no reference to the rt2x00 drivers.
View 4 Replies
ADVERTISEMENT
Apr 9, 2011
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
View 5 Replies
View Related
Jan 30, 2010
i tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
View 2 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Jun 24, 2011
Sometimes I have problems with modules not loaded properly /etc/rc.d/rc.modules, is it recommended to add codes to load modules in other scripts in /etc/rc.d/.
View 1 Replies
View Related
Feb 23, 2010
What is the best way to install perl cpan modules in slackware?
i know that you can use 'cpan' and say 'install date::calc' but there is a perl-date-calc slackbuild on sbo. so which is the better way and why?
View 2 Replies
View Related
Oct 29, 2010
how to display the modules related to my wifi card, using lsmod all the kernel modules are displayed but I would like to display just the related to my wifi, is there a way to do this?
View 2 Replies
View Related
Feb 19, 2011
i tried the new debian 6.0 live dvd and was so happy or the first time i had debian actually booting and then i was like o.O and what's up with my wireless and i then tried to install and the installer finally told me i need the iwlwifi395 drivers for my wireless so i copied that and now i have the drivers and i don't know how to build them to be like on the live image like straight in there since i boot have my wireless.
View 1 Replies
View Related
Apr 9, 2010
I wanna see the wifi signal strength.But when i run the command iwconfig , it tells me 'no wireless extensions'.By googling I found that I need to enable config option CONFIG_NET_RADIO.I see that this has to be done in boot which has config files.So I typed the command grep CONFIG_NET_RADIO /boot/<config-2.6.31.5-127.fc12.i686> (my fedora version is 2.6.31.5-127.fc12.i686).But I got the error as "bash: syntax error near unexpected token `newline' ".I dont know the reason.I also want to know if I have to install driver(ndiswrapper)for viewing wireless signal strength. I thought that the drivers will present default.
View 8 Replies
View Related
Apr 15, 2011
Is the open source wifi rt2x00 driver in the Debian kernel? I tried to install Debian for the last 2 years, It never detects my edimax card ew-7128g, Can't use something without wifi or internet support, it does not detect during the install. Nor when i am on the desktop.
View 1 Replies
View Related
Mar 24, 2011
I would like to recompile my kernel to add few modules to it but I would like to keep my current configuration so as not to have troubles with missing drivers for my hardware and stuff.
How do I do that?
View 7 Replies
View Related
Jun 23, 2010
1. Can you configure wifi while netmanager is running?
2. How do you do above in terminal? what commands do you use?
View 3 Replies
View Related
Jan 22, 2010
It's no longer convenient for me to use a cable for my Desktop Internet connection, but i don't know the pros and cons of my options ; an internal card or a dongle?
View 3 Replies
View Related
Apr 10, 2011
I upgrade my slackware to slackware-current. But, when I look /etc/rc.d/rc.modules, it's still symlink to old kernel. Is this normal? Or i must change the symlink manually?
[Code]...
View 2 Replies
View Related
Jun 10, 2011
For some reason, it seems that 13.37 isn't loading the modules I need for cpu frequency scaling. I've edited /etc/rc.d/rc.modules so that CPUFREQ is set to on. On 13.1, this would mean the powernow-k8 module would be loaded for my AMD cpu, and the subsequent "ondemand" governor would be loaded. However, for some reason this isn't being done during the boot process. I've tried it using both the generic kernel and the huge kernel (I'd been using huge for a long time before without realizing it.) Has anything changed in 13.37 with regards to CPU frequency scaling?
View 5 Replies
View Related
Jun 10, 2011
i want to do is dual boot windows, Slackware, and Debian. I don't care if i use lilo or grub, they are both equally familiar to me, just above nort. i have made attempts at editing the lilo.conf file, which said it had warnings but i didn't know how to view the warnings. It made it so i could select it, but when i did it booted the slack kernel with debian with no modules. get slack, debian and windows all running on my machine the way they're intended?
View 5 Replies
View Related
Feb 11, 2011
I upgraded to the latest -current just like always. I do the kernel packages last. This time, the machine failed to boot, telling me that it could not find the kernel modules. Well, rats.
I booted with a slackware dvd, passed the huge.s kernel, and booted into /dev/sda7, which is my main partition. I mounted /dev/sda7, and installed the kernel-modules-2.6.35.11 pkg. Rebooted, and got the same error?
I booted again with the dvd, mounted the partition, and navigated to /lib/modules - no 2.6.35.11 in there!
How do I get that package to install?
View 6 Replies
View Related
Jul 16, 2011
Upgraded from 13.1. Certain panel plugins seem to be gone in XFCE4.
When I try to add the Icon Box, Task List or several others to the panel, I get "Could not open 'iconbox' module".
There is an iconbox module in /usr/lib/xfce4/panel-plugins, along with some others, but they all date back to 3/29. In /usr/share/xfce4/panel-plugins, there is a mix of newer and older files.
Did the icon box go away? Do I need to nuke ~/.config/xfce4?
View 14 Replies
View Related
May 16, 2011
I've done a clean install of Slackware 13.37 64-bit and am having trouble with building the Perl modules for Bugzilla 4.x.x (downloaded yesterday with bzr). This same problem exists with both Bugzilla stable and 4.1.2+.Executing checksetup.pl results in
Code:
checksetup.pl
* This is Bugzilla 4.1.2+ on perl 5.12.3
[code]....
View 3 Replies
View Related
Jun 1, 2011
I just installed slack 13.37. I was poking around a little and I noticed that I have all these modules loaded... yet when I open up /etc/rc.d/rc.modules almost everything is commented out. how are these modules being loaded at boot time?
View 4 Replies
View Related
Sep 9, 2010
My cli php is missing modules as regular user but not as root. In particular, mysql is missing... which is how I came across this issue. I'm running Slack 12.2 w/ php 5.2.14, standard Slack packages. As a normal unprivileged user:
-> whoami ; php -v ; php -m |wc -l ; php -m |grep mysql
jerry
PHP 5.2.14 (cli) (built: Aug 25 2010 15:17:31)
Copyright (c) 1997-2010 The PHP Group
[code]....
I've tried reinstalling php and it made no difference. php.ini is not to blame. I've Google'd this to death, no luck.
View 7 Replies
View Related
Mar 3, 2010
Tried to get my VDR working again, but the dvb modules refuse to load code...
View 7 Replies
View Related
Jan 10, 2010
If others are have the problem of VirtualBox failing to build the kernel modules with kernel 2.6.32 try this :-
1. Install VirtualBox and watch as the kernel modules fail to compile.
2. Change the line
Code:
KFLAGS += -DRT_ARCH_AMD64
TO
Code:
KFLAGS += -DRT_ARCH_X86_64
In the following files :-
Code:
Line 231 /opt/VirtualBox/src/vboxdrv/Makefile
Line 170 /opt/VirtualBox/src/vboxnetadp/Makefile
Line 174 /opt/VirtualBox/src/vboxnetflt/Makefile
3. Run /etc/rc.d/rc.vboxdrv setup
You will now have a working VirtualBox setup. NB This is written purely from the standpoint of using the Closed source version of VB not the OSE version.
View 2 Replies
View Related
Oct 2, 2015
I've just finished installing Jessie and everything went well, however when I boot into the installed system the WiFi option says that the hardware is disabled. My laptop is a Lenovo G50 which doesn't have a physical switch. the odd thing is that during installation I'm able to connect to my wifi with no problem!
View 8 Replies
View Related
Feb 22, 2011
I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.
PHP Code:
View 7 Replies
View Related
Dec 29, 2010
I tuned on my netbook and my wireless signal had a red exclamation.
Wireless is enabled.
Wireless Networks shows disconnected
I don't get it. Can't seem to get it to connect? How? If I open the connection information I can see the wifi networks around me. And edit/add/delete. But when I go back to the signal and click. it just shows wireless network disconnected and no option to connect. What to do? I have restarted the computer, router, cable modem, etc. Done the updates.
View 9 Replies
View Related
Feb 8, 2010
With the latest Freenode changes SSL connection is now possible which presents no problem, particularly with rworkman's ca-certificates slackbuild, But configuring sasl for the password to nickserv presents a bit more of a challenge as 3 perl modules are required: Crypt::OpenSSL::Bignum, Crypt::DH, Crypt::Blowfish and Math::BigInt. I have not packaged perl modules for slackware before and I guess there is always a first time but can I ask if anybody has already neatly packaged up the required perl modules? I suspect they will be very popular with Freenode slackware irc users...
View 2 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
May 29, 2010
I am having some hang issues with firefox and am not sure what can be the problem. Here is my specs:
Toshiba Satellite L35 Laptop
Ubuntu 10.4 Lucid / Windows Vista Home Basic dual boot
Atheros Integrated NIC
Firefox v3.6.3
Everything is working fine on the network side, being confirmed by both my wife's EEE Netbook, and my iPod(r) Touch. There is no problem with my network interfaces, or my interface card, as confirmed by the other devices' ability to connect and browse at normal speeds.
However; with my lappy running Ubuntu and Firefox, a LOT of websites hang/lag when attempting to browse websites. I have read on some of the forums about disabling ipv6 through the "about:config" option and that seemed to help a little, but not to where it should be. I have tried a lot of options, but it is still lagging.
View 9 Replies
View Related
May 11, 2010
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
View 5 Replies
View Related
