Debian :: RIPIT Can't Find The Config File?

Jan 20, 2011

I've installed RIPIT 3.6.0-1 for Lenny and have been following this tutorial to define a config file that saves all my options and which I can call every time I want to rip a CD [URL]

Following that tutorial I copied the config file in etc/ripit/config to the new director ~/.ripit/config. The new directory and file exist as I can see them when I do ls -a and can edit the new config file.

However when I type the command ripit all I get is the error message No config file found!

View 1 Replies


ADVERTISEMENT

Debian :: Why Apt-file Search Wx-config Not Find - Lenny

Dec 31, 2008

How apt-file works.

Background: I (like somebody else) needed to figure out which package wx-config is in.

Code:

Question: Which package makes a link?

Also why wx-common NOT depends on libwxgtk2.6-dev.

View 4 Replies View Related

Ubuntu Installation :: Unable To Find .config File For Kernel

Jun 21, 2010

I'm looking for the .config file for the kernel which ubuntu uses to compile the standard generic kernel which is delivered in compiled form. I downloaded the following kernel archive ( 2.6.31.8 ): [URL]... I need the original file, because I'm not able to configure a working kernel, so I want to try to compile the kernel with the standard configuration. Afterwards I'm going to change some options.

View 5 Replies View Related

Ubuntu :: Sudo Aptitude Install Fbpanel / Can't Find Config File

Jul 9, 2010

I installed fbpanel with sudo aptitude install fbpanel, but I can't find the config file. according to the readme it's suppose to be under ~/.config/fbpanel/default, but it's not there. Where else can it be? I did a whereis fbpanel and it's located in a few areas, but no default config file is there!

View 3 Replies View Related

General :: Unable To Find Iptables Config File In Ubuntu Lucid

Jun 1, 2011

let me know where is iptables rules stored?

View 2 Replies View Related

Ubuntu Multimedia :: Silent Soundblaster 24 Live USB - Find The Broken Config File?

Jul 24, 2010

My sound card (Soundblaster 24 live! USB) stopped working shortly after upgrading to 10.04. everything was fine until the upgrade as well a immediatly after, so I assume that an update was to blame. If I boot the PC off a live CD, all is well and the sound card works fine.

I've tried running

aplay -l

but it assured me that I do not have a sound card on the system to setup! how I find the broken config file or busted driver?

View 9 Replies View Related

Debian :: 8GB RAM - Can't Find Reference To CONFIG_HIGHMEM In /boot/config-2.6.32-5-amd64

Jul 21, 2011

Recently upgraded to 8GB RAM. BIOS shows 8GB, lshw shows 8GB (2 x4GB), Applications > System Tools > System Monitor > System shows 3.7GB. After 2 days of forum hunting I cannot find a way to check whether the machine is using all 8GB and, if not, how to make it do so. I have found a few postings about using the "bigmem" build but these seem to be for the 32-bit builds as well as a few postings saying that the amd64 build uses bigmem/highmem by default. I can't find any reference to CONFIG_HIGHMEM in /boot/config-2.6.32-5-amd64 and I don't have a menu.lst in /boot/grub to change to a "bigmem" type build.

View 12 Replies View Related

Debian Configuration :: How To Import VPN Config Files With No File Extension

Feb 10, 2016

I've downloaded configuration files for my VPN, Kovurt, and they don't have a .ovpn file extension. Further, when I tried to enter the information manually (using this guide), I saw that the files only include the <ca> tags, and no <cert>, <key> or <tls-auth> tags.

Here is the content of one of the config files, simply named 'Tokyo' with no extension. (adding .ovpn didn't work either):

Code: Select allclient
dev tun
proto udp
remote 50.31.255.86 443
resolv-retry infinite
nobind

[Code] ....

I have an open ticket with Kovurt asking for the other info, but I know already that they don't have much in the way of documentation or support for Linux.

View 0 Replies View Related

Debian Configuration :: User2 Can't Get The File /home/user1/www/wp-config.php?

Apr 17, 2010

how can i do user2 can't get the file /home/user1/www/wp-config.php by using an editor but the webserver can?i mean how can i disallow access on other user's directorys but allow only one? (www-data in case).

View 7 Replies View Related

Programming :: Install Wxsqlite3-2.0.2 On Debian Machine - Wx-config File Cannot Be Found

Feb 23, 2011

I am trying to install wxsqlite3-2.0.2 on my Debian machine. I have installed wxGTK-2.8.11 in the folder: /home/mrj2/wxGTK-2.8.11

When I run the wxsqlite3-2.0.2 configure script, a problem arises due to the fact that wxGTK is expected to be in a specific directory. The wx-config file cannot be found. However, there are copies of these files for each type of build in the folders:

/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseMacUnicode

There is not a problem with my wxGTK installation as I use it in DialogBlocks and it works fine.

View 2 Replies View Related

Debian :: Preserve / Merge Config File Information During Software Upgrades?

Mar 21, 2011

How does Debian preserve/merge config file information during software upgrades? My google searches left me a little unclear on this point. Also (if you happen to know) does Ubuntu use the same method?

View 2 Replies View Related

General :: Using A Config Directory Instead Of A Config File?

May 7, 2011

I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device

config
<?xml version="1.0" encoding="utf-8" ?>
- <config>

[code]...

View 1 Replies View Related

Installation :: Can Not Find Debian.exe File?

Nov 16, 2010

I'm a new comer to this area. I'm trying to install debian on my laptop withg WinXP
and make it dual boot. Reading the installation guide on the Debian wiki page, I want
to download the debian.exe from goodbye-microsoft.com page. But the page is some
thing else. Anyone has any idea where I can find the debian.exe file?

View 11 Replies View Related

Ubuntu :: 11.04 Where To Find Printing Config?

May 29, 2011

After upgrading from 10.04 to 11.04 my printer was still working. Now after I change my internet service, the printer needs new configuration and I checked all applications looking for printing setup and the only printing option I found under Administration tab but it does not have any setup or config choice.Looking for help to setup my devices with 11.04.

View 7 Replies View Related

Programming :: Cannot Find Gtk-config On Ubuntu9.04 After Installing GTK

Nov 15, 2009

Hi,
This is my first time here.
I have installed GTK by "sudo apt-get install gnome-core-devel" and I can build the test-application named "Hello ubuntu" successfully with `pkg-config --cflags --libs gtk+-2.0`.
But when I built an application which needs the GTK's support, it said as follows:

checking for gtk-config... no
checking for GTK - version >= 0.99.7... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
configure: error: Cannot find proper gtk version
I don't know what's wrong with it,anyone can help me?
Thanks a lot!

View 2 Replies View Related

Debian Installation :: Cannot Find The Iso File In The Downloaded Folder?

Jun 11, 2011

I downloaded debian-6.0.1a-i386-netinst.iso. i would like to burn the cd as iso image but i cannot find the iso file in the downloaded folder. i am going to browse the iso file on vmware.

View 6 Replies View Related

Fedora :: Display The File On The Gnome Desktop Without Messing Up The KDE Config File?

Jan 4, 2010

New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?

View 2 Replies View Related

Fedora Hardware :: Can't Find System - Config - Display?

Mar 2, 2010

When I installed F11 it didn't have the i810 driver so it defaulted to VESA. I upgraded to F12 using preupgrade and thought it would re-detect the graphical hardware and didn't. I want to recreate xorg.conf for my computer (Toshiba Satellite A45-S25) so I can use Compiz and some 3D application but I can't find system-config-display. It's missing from the system and I don't know what package it belongs to so I can't re-install it.

View 2 Replies View Related

Fedora :: Can't Find System-config-display Packages?

Feb 2, 2011

I can't change my screen resolution but my fedora doesn't have system-config-display. Trying to install this package and for some reason it is not listed under the add/remove software, and yum says it can't find it either.

# yum install -y system-config-display
results
No package system-config-display available.
Error: Nothing to do

Searching in the add/remove software I found some others such as system-config-firewall, system-config-date and etc but it doesn't have system-config-display. Is there any other way to install this package? currently running kernal linux 2.6.35.9-64.fc14.x86_64 , fedora 14 on 64 bit system gnome 2.32.0

View 8 Replies View Related

Ubuntu Multimedia :: Where Is Association Config File For File Extensions?

Aug 7, 2010

I'm using Ubuntu 10.04.1 LTS (Netbook).I need to associate ram file extension to realplayer. First time I opened a ram file I choosed the default player, Reproductor de peliculas (I think Movie player in english).Now when I choose Open with Realplayer and remember the application for this extension it opens the archive but it does not remember for the next times. It seems to be a little bug. How can I do it manually? Where is the association config file for file extensions?

View 2 Replies View Related

Ubuntu :: How To Find / Delete Unused Hidden Config Folders

Oct 12, 2010

I recently moved to a new machine, and I copied my entire home folder across. This included lots of hidden (starting with '.') folders, and in many cases they are config folders for packages which I have not installed on the new machine. They are taking up space, so I would like to delete them, but to go through manually and figure out which ones I need would be very laborious. Is there a way to find, and perhaps delete, config folders for packages that are not installed?

View 2 Replies View Related

General :: Error: Cannot Find GLIB Version >= 2.0: Is Pkg-config In Path?"

Apr 12, 2010

I am trying to install syslog-ng-3.0.2 on Fedora 12 and have run into an issue I don't know how to solve. When runing the "configure --enable-ssl" I get the following "checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.14 checking for GLIB - version >= 2.0... 2.0, bad version string no configure: error: Cannot find GLIB version >= 2.0: is pkg-config in path?" I have glib-2.24.0 installed on this system so I don't understand where this issue is coming from or how to fix it.

Back ground on my system -
[root@syslog-ng]# set PKG_CONFIG=/usr/lib/pkgconfig
[root@syslog-ng]# export PKG_CONFIG

View 8 Replies View Related

Debian :: Iceweasel Can't Find File At /usr/share/doc/cups/online-docs/admin

May 12, 2010

[code]...

to do administrating job by clicking "Adding Printers and Classes" or whatever. However, unfortunately, what I get today is

Iceweasel can't find the file at /usr/share/doc/cups/online-docs/admin.

So, click "Overview of CUPS" insted, then scroll halfway down, click "Administration" under Where Do I Begin? BINGO, you can proceed. My penguin is Debian squeeze AMD64.

View 1 Replies View Related

Debian :: Unable To Find Expected Entry 'iceweasel-5.0/source/Sources' In Release File?

Jul 9, 2011

When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.

View 2 Replies View Related

Ubuntu Installation :: How To Load Kickstart Config File - Refuses To Load File / Launches Generic Install

May 6, 2010

I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.

View 1 Replies View Related

Ubuntu :: No Such File As Config.log?

Mar 29, 2010

How do I view a config.log file?

When I enter ls config.log is listed.

When I type 'type config.log' it says no such file as config.log !!

View 1 Replies View Related

Slackware :: Where Is The Config File For Tty

Jan 1, 2011

i've been wondering what's up with the tty's in slack. [ctrl]-[alt]-[f1-f5] don't seem to work for CLI consoles, and [ctrl]-[alt]-[f8-f10] don't work for X. where's the config file to change this?

View 2 Replies View Related

Ubuntu :: Xmodmap Config File?

Jun 24, 2011

I'm trying to learn swedish, and I want to remap some of my key to be able to write the special chars. xmodmap -pke" gives me the current config, and most of lines are like that (6 keysyms) :

Code:
keycode 24 = a A a A adiaeresis Adiaeresis
But I actually can't access 2 of them, the #3 and #4.

[code]....

View 2 Replies View Related

Red Hat :: Install A Config.mk File In Fedora?

Mar 3, 2011

I have a cd containing wifi drivers, but inside is a config.mk file and no configure file. so when I tried to install the tarball using ./configure it could nt find anything. so I tried using su - then I said sudo ./config.mk and it said bash error I don't have premission and it referenced the sudoers file. I not sure what this means, and am I even installing the right file for the driver I need. there is also already a Makefile in the folder as well....

View 2 Replies View Related

General :: Config File For New Remote?

Jun 3, 2011

i want to create new config file for remote using irrecordbut what are the steps please tell me about thathow to save config file?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved