Experienced that building the vbox guest additions (on the binary/non-free vbox) on a slackware --current guest (with windows *and* linux as a host) fails now with the new kernel's just released in --current?
View 7 RepliesGetting this error message and can't get by it........
Problems were found which would prevent the Guest Additions from installing.
I run openSUSE 11.2 on my notebook using VirtualBox 3.0.6_OSE r52128. Recently, I installed the guest additions on my Windows XP guest system (VBoxGuestAdditions_3.0.6.iso).
Before this installation I was able to use a screen resolution of 1024x768 in the guest system. Having installed the guest additions the best result I get is 800x600.
The resolution I'd like to get is 1280x800 which is the default setting of the host system. The graphic device used in my system is an Intel 965 GME/GLE.
I'm trying to test 10.04 Lucid 32-bit within 9.10 using VirtualBox. Guest additions aren't working fully--I can copy and paste text, but my mouse pointer still gets captured. No indications of any problems during installation. Also, I get the "Ubuntu is running in low-graphics mode" error message starting up, indicating Ubuntu can't detect the hardware properly. Screen size is stuck at 800x600.
I've tried reinstalling Guest Additions, increasing Video Ram to 128MB, and putting screen resolution and vbox device data into xorg.conf. Nothing changes. Actually, there is no xorg.conf on the system, only an xorg.conf.failsafe. I modified that, no effect--though the file gets overwritten on boot up to be what it was originally. I also tried adding my own xorg.conf. That doesn't get overwritten, but also has no effect.
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies View RelatedI have Ubuntu running as a Virtualbox, and every time it upgrades the kernel, the Guest Additions stop working.The install process in Linux requires using a virtual CD, running scripts from the command line, etc.Is there any way to keep the guest additions constantly working even when the kernel is upgraded? Can they be installed as Ubuntu packages instead of installing off the virtual CD?
View 2 Replies View RelatedI am running Lenny and using VirtualBox OSE 1.6.6. In order to try squeeze I installed it in a VM. I tried to install Guest Additions also, but i get this error:
VirtualBox 1.6.6 Guest Additions installation
Building the VirtualBox Guest Additions kernel module...
Building the shared folder support kernel module...
Unable to build the kernel module.
I checked what /var/log/vboxadd-install.log had to say:
/usr/src/linux-headers-2.6.32-5-common/include/net/neighbour.h:115: error: variably modified a at file scope
/tmp/vbox.0/utils.c: In function 'sf_path_from_dentry:
[code].....
I tried with 3 versions of the kernel 2.6.32-5-686,2.6.32-5-484,2.6.32-3-686 but I cannot get it to work using any of them. Also I tried to install version 2.6.30-2-686 but I couldn't since synaptic said that it Depends: linux-kbuild-2.6.30 but it is not installable.
When I try to change the resolution, it only shows 800X600 and 640X480 or something similar, nothing regarding a custom resolution. When I use the "Install Guest Additions" it won't mount because of some error, and so I can't open it, and even if I could mount and open it *I've tried it in other distros that don't automatically install it for you* I have no idea what to use. I've tried all of the .sh, even the autorun.sh and giving it executable permissions, and it STILL doesn't work. Perhaps I'm missing something, or there's a documentation out there that I can't find, but I can never get them to work. How can I fix this problem? I know in sbopkg, there's 32-bit Virtualbox Guest Additions but that doesn't work. The reason why I installed the 64-bit one is because I don't have 6 CDs to spare and I'm almost out of bandwidth and it has to last me a week. *I think around 200GBs out of 250GBs taken up so far, or more*
View 14 Replies View RelatedI opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I've just installed clean copies of both VirtualBox v4.0.8 and Fedora 15. Now I have followed the instructions here : [url] to install the latest VBox guest additions.
Each time I try I get the following message:
The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. The missing package can be installed with
yum install kernel-devel-2.6.38.8-32.fc15.i686.PAE.
However, if I run that command I am told there is no such package available. The guest addition installer continues seemingly OK, but after a restart they are not loaded.
I've just moved to Fedora from Ubuntu due to major issues with its new version.
I'm trying to install the Guest Additions for a VM running a guest Lucid Lynx Server. The problem I'm encountering is this: The vboxadd-install.log for vbox says it "couldn't find the sources of your current Linux kernel" and to "Specify KERN_DIR=<directory> and run Make again."
View 4 Replies View RelatedOpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies View RelatedI had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).
View 5 Replies View Relatedi've installed kubuntu 10.04 on a sun virtualbox , and when i tried to install the guest additions i got this error in the terminal:
Building the VirtualBox Guest Additions kernel modules. fail ! (Your system does not seem to be set up to build kernel modules. Look at /var/log/vboxadd-install.log to find out what went wrong) i'am running windows 7 as a host operating system .
I have install windows XP and Fedora-14-X86_64 on dual boot, I want to run other OS on fedora by using Virtual machine. I have download and installed VirtaulBox-4.0.0 successfully but I cannot able to start it. I got error about Vbox driver not installed [error code:1908]. I have also installed DKMS package, but also didn't work.
Finally I found the actual problem was kernel not compatible with latest version of vbox and I need to update my kernel-headers. I also meet that solution by using command: yum install binutils gcc make patch libgomp glibc-headers glibc-devel kernel-headers kernel-devel and its work fine, this command download and install the kernel compatible VirtualBox-3.2.* and now its works fine.
But problem is that when I booting my PC, it shows 3 options for entering OS rather then 2.
1. Fedora-14 (2.6.35.10.74.X86_64) [which is new one/updated after using that command]
2. Fedora-14 (2.6.35.6.45fc14.X86_64) [which is new one/updated after using that command]
3. Other [windows XP]
How can i delete that old version- No.2?
I am running Ubuntu 10.04 (the guest) in VBox 3.2.4 which is running in Vista (in a dual core AMD Athlon). Ubuntu works okay except the screen size is one-quarter of the space available on the 22" widescreen monitor. I read that installing BoxAdditions_3.2.4_62467 can solve the problem. When I run the terminal command (using the appropriate file) sudo sh ./VBoxLinuxAdditions-amd64.run I get an error message --> sh: Can't open .VBoxLinuxAdditions-amd64.run
View 7 Replies View RelatedI'm using Slackware 13.1 32bit and can't run virtualbox when I try to boot the virtual machine it shows me a window with the following message:
Quote:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
run - /etc/rc.d/rc.vboxdrv setup
Quote:
Stopping VirtualBox kernel module ...done.
Recompiling VirtualBox kernel module ...failed!
(Look at /var/log/vbox-install.log to find out what went wrong)
Check /var/log/vbox-install.log
Quote:
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.33.4-smp/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
test -e include/generated/autoconf.h -a -e include/config/auto.conf || (
echo;
[code]....
I am a very beginner Debian user, Debian is installed in VirtualBox, which is hosted on Windows. I try to install VirtualBox Guest Additions without success.
First method: in VirtualBox menu, Devices->Install Guest Additions I receive a message: Cannot find the autorun program. Screenshot here: [url]
Second method: in shell I do su and then navigate to the cd rom and run the script /media/cdrom/VBoxLinuxAdditions.run by hand.
I get Permission Denied. Screenshot here: [url](I basically follow the tutorial [url]
How to install it?
When I installed Guest Additions Fedora 14 will not boot anymore.
While booting I get the message:
I'm trying to install the Virtual Box Guest Addition for my openSUSE 11.3 VM, but I'm having some problems. The Virtual Box manual says I need to install the kernel-default-devel package, so I did that, but it also says :
Make sure that your running kernel (uname -a) and the kernel packages you have installed (rpm -qa kernel*) have the exact same version number. Proceed with the installation as described above.So I ran both commands and here is the output :
edgar@linux-t7uc:/> uname -a
Linux linux-t7uc 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
edgar@linux-t7uc:/> rpm -qa kernel*
[code]...
the devel packages are version 2.6.34.7-0.7.1 and the kernel is version 2.6.34-12. How do I install the correct version of the kernel-default-devel and kernel-devel package with zypper? I thought maybe the versions could be compatible somehow, so I tried to install the Guest Addition and here's the result :
edgar@linux-t7uc:/media/VBOXADDITIONS_4.0.4_70112> sudo sh ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........
[code]....
I'm using Virtualbox to test Meerkat. I have the same problem with Ubuntu & Xubuntu,
Here is the output from VBoxLinuxAdditions-x86.run..
Here's the last few lines from vboxadd-install.log..
i have installed ubuntu 10.10 on Virtual box and now am trying to install guest additions as shown [URL].Problem is when i type into the Terminal "cd /media/cdrom" it replies with "No Such File or Directory"
View 1 Replies View RelatedJust installed Virtualbox 4.0 on my netbook. Cannot seem to find an option for guest additions though.
How do I install guest additions on Virtualbox? (don't think I have the OSE version)
I have 2 Centos 5.4 builds...one is x64 and the other on aother box is 32 bit...Both are running in virtual machines with version 3.1.4 Virtualbox.
I have tried on both versions to install the guest additions and on each the terminal comes up briely and then does not install...No error messages.
I use CentOS under VirtualBox. There are Guest Additions, but for Ubuntu are
virtualbox-ose-guest-utils and virtualbox-ose-guest-x11
There are GA replacements, better than GA (no problem with AppArmor). Are CentOS replacements ?
#1. Host Wheezy 7.8 KDE 64 bit
VBox 4.1.18_Debian r78361
Ext.Pack 4.1.18 r78361
Can use a WIN XP appliance (from my old PCLinuxOS) as guest there without any issues.
Added a second guest - Jessie 8.0 KDE 64 bit. Works, but no seamless display, mouse issue ...
So added inside guest:
non-X11 guest utilities + X11 guest utilities from the repositories
(These utilities are meant to be run inside the the virtual machine. They provide closer integration ...)
I simply don't know, how to run those utilities ...
What I get is
Code: Select all# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● virtualbox-guest-utils.service loaded failed failed LSB: VirtualBox Linux Additions
● virtualbox-guest-x11.service loaded failed failed LSB: VirtualBox Linux X11 Additions
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
2 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
#2. Host Jessie 8.0 KDE 64 bit (on a second hdd)
VBox 4.3.18_Debian r96516
Ext.Pack 4.3.26 r98988
VNC 4.3.18 r96516
Same situation as in #1.
How do I run those xxx VBox applications inside guest?
Error " unable to build kernel module " see the log file /var/log/vboxadd-install.log for more details.
View 8 Replies View Relatedwhere to download Guest Additions Virtualbox for Fedora 14 ?
View 4 Replies View Related