Slackware :: Onboard Sound VIA82xxx Not Working In Current And 13.1
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
ADVERTISEMENT
Aug 21, 2010
I have been trying to get my onboard sound working with OSS in gstreamer-properties when i press test i get sound coming out of my speakers, my onboard sound is recognised in ossxmix, but i dont get sound anywhere else. Onboard soundcard is Realtek ALC883
View 1 Replies
View Related
Apr 12, 2011
I have installed slacware 13 on an intel server, but the IP add that i have assigned does not work. I used ifconfig to check the ip but it shows me 127.0.0.1. I have run netconfig with the ip address i need and restart the machine, but it goes back to 127.0.0.1
View 2 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Mar 7, 2010
after this bug update, my laptop loose the sound, I have run alsaconf and nothing.If I run rc.alsa I get:Quote:Loading ALSA mixer settings: /usr/sbin/alsactl restore
/usr/sbin/alsactl: load_state:1608: No soundcards found...
View 1 Replies
View Related
Jan 9, 2010
I just upgraded my Slackware64-current version to the latest kernel 2.6.32.3. Almost everything works just fine, except that I have no sound on the command line and in web browsers, anymore. I don't get any sound out of the command line program play and Flash.
For example, I have a few .wav files, that I can play with Kaffeine and Amarok, but when I try to play them with play on the command line, the program runs and displays that it plays the file, but I don't hear any sound. The same happens with XMMS, too: It displays the usual graphics showing the dynamics and the progress, but my speakers remain silent.
Also, alsaconf doesn't detect my audio hardware, anymore. I have onboard sound and a Creative X-Fi PCI card. Usually both were "seen" by alsaconf. Now it tells me, that it can't identify any audio cards.
On the other hand, when I go into the multimedia section of the KDE system settings, I can "Test" the audio hardware, and the onboard sound works great and I can hear the KDE welcome sound. I have already remove all packages withe 'alsa' in their name and re-installed them, including their compat32 peers, and rebooted several times. Up to now to no avail. Does anyone have a clue, what the problem is caused by?
View 10 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Nov 20, 2010
I see the "starting calculator" icon but it just disappears after a few seconds. If gcalctool is run from a terminal it prints Code: GLib-GIO-ERROR **: Settings schema 'org.gnome.gcalctool' is not installed The way to fix it : Code: cd /usr/share/glib-2.0/schemas/ glib-compile-schemas .
View 1 Replies
View Related
Mar 14, 2011
On my netbook here, I did a fresh install of --current.
I cannot get hibernate to work, it seems to fall back to suspend.
In /var/log/pm-powersave.log I get this message:
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed
The netbook then seems to fallback to suspend at that point.
View 7 Replies
View Related
May 14, 2010
Alright, so I finally decided to test Slackware Current on my laptop. After this upgrade my touchpad does not work in X, but it does work in the terminal. The mouse section of my xorg.conf is:
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
[Code]...
If I cat /dev/psaux I get output when i move my touchpad around. I also ran cat on /dev/mouse and I also get output from that when i move my touchpad around. I also tried Protocol "Auto" instead of PS/2, and IMPS/2 to no avail. Also, to begin with I was using the synaptics driver, and i moved it back to the generic mouse driver, and still nothing.
View 1 Replies
View Related
Feb 8, 2011
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]...
View 11 Replies
View Related
Mar 5, 2011
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
View 9 Replies
View Related
Jun 13, 2010
I have had this problem for far too long, my onboard sound will not work, i went from Xubuntu, to Vista now to here! NO the mute is not on, it says i have sound but I dont! I did the lspci command and got this:
ALSO I have a custom built computer that came with a Rocket Fish sound card model RF-51SDCD that I rip out (no known drivers for that sound card). I have a Compaq Presario 061. Model number is DT076A-ABA S6200CL NA410. My motherboard is an ASUSTek Kamet2. The firmeware is Phoenix Technologies version 3.05 (cant find an update for that either).
View 9 Replies
View Related
Sep 8, 2010
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies
View Related
Apr 12, 2011
I have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
View 2 Replies
View Related
Mar 13, 2010
Ubuntu 9.10Code:$ uname -aLinux ubuntubear 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 GNU/LinuxI have ASUS M4A78-E motherboard. I've disabled Onboard sound card (VIA VT1708S) and installed Audigy sound card (c-media sb 8738 5.1 channel (CMI8738/PCI-6ch-LX)). But my system still detects Onboard sound card.
Code:
$ alsamixer
AlsaMixer v1.0.20 (Press Escape to quit)
[code]....
View 2 Replies
View Related
Dec 12, 2010
I use 64-bit Ubuntu Lucid. This machine has an onboard Nvidia sound chip (which can not be disabled in BIOS), I also have an Soundblaster Audigy 2 card, which i'd rather use.
Previously, this was impossible because Ubuntu could only configure the first card. However, with the event of 10.4 and the easy-to-use selector in Sound Preferences I was hopeful that it would work now. But no luck.
I should mention that this machine dual boots to Win XP, and the Audigy works like a charm there, so it must be a Ubuntu problem. The Audigy 2 card is detected by Ubuntu, and is selectable in Sound Preferences, playback is fine with no errors, the source appears in Sound Preferences, but no sound.
These are the steps I have tried, without success:
- Disable the on-board card in Sound Preferences
- Cranking all the sliders to max in Alsamixer
- Checking that there's no mute in Alsamixer, Sound Preferences, Volume Control
- Adding lines to the bottom of /etc/modprobe.d/alsa-base making the Audigy the default card (0), and the Nvidia secondary (1). The output of
Code:
Now reads:
Code:
View 3 Replies
View Related
Oct 8, 2010
I have a system with an on-board S/PDIF output (the one I want to use) and a ATI graphics card that has an HDMI output and therefore an own audio device./proc/asound/cards shows me the following:
Code:
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f8000 irq 16
[code]....
View 4 Replies
View Related
Jan 14, 2011
Over the last few days I've been spending some time converting my headless web server into a media center running Boxee for our lounge.
I have managed to get *nearly* everything working with the exception of sound. The computer has onboard sound, both front and back ports, and I tried every combination of outputs and plugs.
I also checked it wasn't muted, or anything like that.
So, I wasn't able to get it working with the stock Ubuntu 10.10 stuff - I turned to Google and found a thread which suggested I download and install this.
I ran the ./install as root, and it took about 3 minutes to install everything. Rebooted and now I'm left worse off than before - this time I actually have no sound card even listed.
I've been thinking some more, and after another hour or two reading through random threads, I think it may have been a mistake to install those drivers.
I couldn't find a way to uninstall them, so I've been reinstalling all the alsa and PulseAudio packages I can find with no luck.
Now I'm stuck with doubly no-sound.
If I can't get onboard working then I'm considering buying a new graphics card with HDMI out (the current one has a hard time with Boxee), or maybe a dedicated sound card instead.
View 9 Replies
View Related
Feb 17, 2011
I am new to Linux and ran into a problem with no sound after a fresh install of Debian 6.0.
Here is what I get from my I/Os. (yes speakers are on, plugged in and all volume controls have been toggled and tweaked in every which way.)
Code:
View 1 Replies
View Related
Aug 19, 2010
I was reluctant to start yet another sound thread, but after days of searching sites and reading mini HOWTO's I'm still mute. I have tried configuring ALSA via:
# alsaconf
# /etc/rc.d/rc.alsa start
# alsamixer - all relevant sliders unmuted...
# alsactl store
...and still nothing. KDE reports that 'Audio playback device ALC889 does not work.' My kmix app doesn't even start. At boot I get this message 3 times:
"ALL CONFIG FILES NEED /etc/modprobe.d/sound - it will be ignored in a future release"
Even starting xmms brings up 'Check that - your soundcard is configured properly/the correct plugin is selected/no other program is blocking the soundcard'. btw, Windows reports I have an ALC888, not a 889. KDE lists it as present as both digital and analog, and the legacy system (whatever it is) as well as esound, but none work. I certainly had no difficulty with S11.
View 19 Replies
View Related
Aug 12, 2010
I got a new (used) Sony Vaio VGN-SZ440, I installed Slackware-current x86. Everything pretty much worked out of the box, including wireless. The only thing that is not working is my sound (It is not muted I already checked :-p). Here is my lspci output:
Code:
root@darkstar:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
View 8 Replies
View Related
Feb 7, 2011
Im using RHEL 4.2, here in bios level onboard network port is detecting. But when trying to fetch that network port i cant able to connect internet. when i put ifconfig eth1 the port is not available in onboard.
View 8 Replies
View Related
Mar 28, 2011
I used Mumble 1.2.2 for a while on my Slackware 13.1 system without any problems. After some time (before 1.2.3 was released) it suddenly stopped working. A few days ago, I wiped my disk and re-installed Slackware 13.1. Compiling 1.2.3 worked. Running it just stopped with a "FUTEX"-Error. I searched the source code for futex (with "-i" parameter) and didn't found anything. There were matches in the compiled object files. So, it's probably something with Qt.
Then I compiled Mumble 1.2.2 and run it. Worked. But it didn't find my microphone. I can hear everybody else but I cannot talk. I tried every device but there is no sound. If I activate the microphone in alsaconfig I can hear myself, so the microphone seems to work. A few minutes ago, I compiled Mumble 1.2.3. You know what? It runs without any "FUTEX_WAIT" error. But, the microphone does not work.
View 4 Replies
View Related
Mar 14, 2010
This is my first attempt switching to Ubuntu from Windows, and I am having some trouble getting the on-board ethernet to work in Ubuntu 9.1. I have a MSI KM2M Combo-L VIA KM266 and VT8235 Chipset which uses the Rhine II chipset. I am trying to use the onboard ethernet, however it does not connect to the network after installing Ubuntu, although the driver appears to have been automatically installed. I also tried this with several other network cards (Intel, Dlink, Netgear) with various chipsets, but none seem to work.
Our network Netgear switch/router has DCHP enabled, and all of the Windows computers connect just fine. This is true even when we plug another computer into the ethernet cable serving the Ubuntu computer. When I manually configure the IP address, it shows the network connection as connected, but it is unable to ping and/or connect to the internet (except for localhost and the assigned IP address). I used 192.168.11 as the IP, 255.255.255.0 as the netmask, and 192.168.1.1 as the gateway. Below are several commands, that I've run to provide some additional information (using auto eth1).
[Code]....
View 6 Replies
View Related
Oct 22, 2010
After updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies
View Related
Aug 7, 2014
I use Bluetooth on my laptop since many month, but afer a recent update (running jessie), my device stopped being usable :
gnome Bluetooth interface say "no Bluetooth device", and here is lsusb :
Code: Select all16:30 mathieu@kubrick ~ % lsusb
Bus 002 Device 003: ID 5986:0315 Acer, Inc
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
16:34 mathieu@kubrick ~ %
and lspci :
Code: Select all16:38 mathieu@kubrick ~ % lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
[code]....
most sad is :
Code: Select all16:41 mathieu@kubrick ~ % hcitool dev
Devices:
16:41 mathieu@kubrick ~ %
View 0 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Oct 29, 2010
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
View 1 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
