Slackware :: Slackware Current 64 Bit Wine Sound - Error: Alsa:ALSA_CheckSetVolume Could Not Find '{PCM,Line} Playback Volume' Element
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
ADVERTISEMENT
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Oct 19, 2009
Now i have 64 bit computer i installed Slackware 23 64 bit on it. i followed Alien Bob's multi lib how to and installed needed libraries one by one. everything is fine expect wine configure script can not find some libraries needed: libgsm, libmpg123, libopenal, libxcomposite.
I have already installed 32 bit compatibility packages and used /etc/profile.d/32bit.sh as recommended in Alien Bob's howto. configure -- does not really list anything for pointing for libraries.
View 14 Replies
View Related
Dec 20, 2010
I have an old Win98 program that controls my amateur radio transceiver. I want to try it in wine, so have followed Eric's instructions on a clean -current installation. When I get to the wine SlackBuild, it tells me that it needs fontforge & webcore-fonts. I am assuming that I need to install these dependencies as 32-bit, but I am not sure, so would someone use the proper baseball bat to get me on track?
View 3 Replies
View Related
Oct 11, 2010
basically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
View 8 Replies
View Related
Oct 19, 2010
when i plug in my headphones i was getting sound output both from the laptop speakers and the headphones, then i tried changing the sound.conf file and still no success and then i tried reinstalling the alsa - i downloaded the latest alsa-driver and alsa-lib and installed them, but when i rebooted there was no more sound from the headphones when i plug them in. I don't know what to do, i tried reinstalling alsa multiple times but still no success. Is there any way to bring back my previous configuration when i installed slackware ? Or some way to roll back using the installation dvd ?
View 2 Replies
View Related
Jun 23, 2010
Slackware 13.1_64, everything works like a charm,BUTevery time my slackware boots up,the sound system changes from one device to another.So if I boot now, sound address is hw:1.0.
then if I reboot, the sound address becomes hw:0.0It's really annoying, because every time I have to re-run xmms and mplayer setup to get any sound!Also, if any program is playing audio (like xmms), other programs cannot play audio at the same time.ie: if I'm listening music with xmms then I try opening some video with mplayer or firefox/flash, I get no audio on this video....What's the deal with kde phonon? I thought it was supposed to be the new global sound system for kde4, like arts was for kde3
View 1 Replies
View Related
Oct 22, 2010
After updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies
View Related
Mar 7, 2010
after this bug update, my laptop loose the sound, I have run alsaconf and nothing.If I run rc.alsa I get:Quote:Loading ALSA mixer settings: /usr/sbin/alsactl restore
/usr/sbin/alsactl: load_state:1608: No soundcards found...
View 1 Replies
View Related
Dec 18, 2010
I just installed SLACKWARE from ISO image, but don't know the version, the release is 2.6.27.7-smp.
View 4 Replies
View Related
Jan 9, 2010
I just upgraded my Slackware64-current version to the latest kernel 2.6.32.3. Almost everything works just fine, except that I have no sound on the command line and in web browsers, anymore. I don't get any sound out of the command line program play and Flash.
For example, I have a few .wav files, that I can play with Kaffeine and Amarok, but when I try to play them with play on the command line, the program runs and displays that it plays the file, but I don't hear any sound. The same happens with XMMS, too: It displays the usual graphics showing the dynamics and the progress, but my speakers remain silent.
Also, alsaconf doesn't detect my audio hardware, anymore. I have onboard sound and a Creative X-Fi PCI card. Usually both were "seen" by alsaconf. Now it tells me, that it can't identify any audio cards.
On the other hand, when I go into the multimedia section of the KDE system settings, I can "Test" the audio hardware, and the onboard sound works great and I can hear the KDE welcome sound. I have already remove all packages withe 'alsa' in their name and re-installed them, including their compat32 peers, and rebooted several times. Up to now to no avail. Does anyone have a clue, what the problem is caused by?
View 10 Replies
View Related
Feb 20, 2010
I have a problem with my sound. I can't really increase the volume of the sound. I already looked in alsamixer and everything is maximized. With the same headphones in Windows, I can achieve great sound volume. Does someone know why the sound is too low? I started alsaconf and created a new configuration. After that run aumix. Now I have the volume I wanted.
View 2 Replies
View Related
Sep 3, 2010
I thought I would try out Eric's KDE 4.5.1 and Robby's new Xorg pacakges. The upgrade went off with out a hitch, but now when I try to launch conky I get
conky: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory
So I rebuilt conky and reinstalled libmowgli ran ldconfig but I still get the error.
View 4 Replies
View Related
Apr 30, 2010
I have a new install of Slack 13 and upgrading to current will break a lot of things for my 4 year old son (he's a gnome guy, what can I say). I will be using this machine too, and I NEED KDE, but of course the stock KDE packages are unstable to say the least. I know I've seen people talking of downloading upgraded kde packages for slackware 13, but when I google, I find a lot of things complaining about the stock KDE and of course Eric's packages for current.
View 2 Replies
View Related
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
View Related
Jan 30, 2010
Using slack 13.0 32-bit.
I'm using [url] with one modification only:
The version number at $SRCVER was changed to 1.1.37
The script has failed with the following error message:
Code:
The code at that line is
Code:
I also have noted the following (in part) outputs previous to the error
Code:
It appears to me that a successful build may have been made at /tmp/build/package-wine/usr But the install has failed.
View 14 Replies
View Related
Mar 29, 2011
I'm getting an md5sum error on two files in the latest slackware64-current:
This problem doesn't appear to be due to my download.
The 32-bit slackware-current has no md5sum errors.
View 3 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 7, 2010
When I run xload, it gives the following:
Code:
xload
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
It's an up-to-date Slackware64 current, with only ruby and poppler downgraded to 13.0, but I don't think either would do it.
It's not a big deal, but I wonder if it might be a sign of some bigger problem.
View 3 Replies
View Related
Dec 7, 2010
I'm trying to compile virtualbox 3.2.10 con slackware current 32bit through sbopkg
I get this error (I'll copy only the end part)
Code:
CXX VMMR3 - {C}/src/VBox/VMM/VMMAll/TMAllCpu.cpp
cc1plus: warnings being treated as errors
In file included from /tmp/SBo/VirtualBox-3.2.10_OSE/src/VBox/VMM/VMMAll/PGMAll.cpp:236:0:
[Code].....
View 4 Replies
View Related
May 7, 2010
While I was compiling kuickshow I noticed this error:
Code:
src/CMakeFiles/kuickshow.dir/kuickshow_dummy.o
Linking CXX executable kuickshow
/usr/lib/gcc/i486-slackware-linux/4.4.3/../../../libImlib.so: undefined
reference to `png_check_sig'
collect2: ld returned 1 exit status
make[2]: *** [src/kuickshow] Error 1
[Code]...
View 10 Replies
View Related
Jan 30, 2010
I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.
CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?
I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.
View 4 Replies
View Related
May 7, 2010
since an update to the latest -current version, it comes to an error inside the init script from the initrd.gz on my system, shortly behind the scan for encrpyted devices inside lvm containers.
The message is
Code:
mdadm: No arrays found in config file
1 logical volume(s) in volume group "vg" now activeash: missing ] mount: mounting crypt-vg-root on /mnt/failed: No such file or directory ERROR: No /sbin/init found on rootdev (or not mounted). Trouble ahead. You can try to fix it. Type "exit" when things are done. If i then unlock the crypted root device within the lvm, boot continues. I think this is a bug, because configuration did not change, and it worked before the update.
View 7 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Jan 9, 2011
When I run frozen-bubble, I get this error:
Code:
lysender@darkstar:~$ frozen-bubble
Can't locate Locale/gettext.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.2/i486-linux-thread-multi /usr/lib/perl5/site_perl/5.12.2 /usr/lib/perl5/vendor_perl/5.12.2/i486-linux-thread-multi
I have updated to current as of Jan 2 but I'm not really sure when the problem started since I only play with frozen-bubble sometimes.
Will rebuilding fronzen-bubble solve it? Haven't tried it yet as of now.
View 4 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
