Ubuntu 9.10Code:$ uname -aLinux ubuntubear 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 GNU/LinuxI have ASUS M4A78-E motherboard. I've disabled Onboard sound card (VIA VT1708S) and installed Audigy sound card (c-media sb 8738 5.1 channel (CMI8738/PCI-6ch-LX)). But my system still detects Onboard sound card.
Code:
$ alsamixer
AlsaMixer v1.0.20 (Press Escape to quit)
[code]....
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I use 64-bit Ubuntu Lucid. This machine has an onboard Nvidia sound chip (which can not be disabled in BIOS), I also have an Soundblaster Audigy 2 card, which i'd rather use.
Previously, this was impossible because Ubuntu could only configure the first card. However, with the event of 10.4 and the easy-to-use selector in Sound Preferences I was hopeful that it would work now. But no luck.
I should mention that this machine dual boots to Win XP, and the Audigy works like a charm there, so it must be a Ubuntu problem. The Audigy 2 card is detected by Ubuntu, and is selectable in Sound Preferences, playback is fine with no errors, the source appears in Sound Preferences, but no sound.
These are the steps I have tried, without success:
- Disable the on-board card in Sound Preferences
- Cranking all the sliders to max in Alsamixer
- Checking that there's no mute in Alsamixer, Sound Preferences, Volume Control
- Adding lines to the bottom of /etc/modprobe.d/alsa-base making the Audigy the default card (0), and the Nvidia secondary (1). The output of
Code:
Now reads:
Code:
I have been trying to get my onboard sound working with OSS in gstreamer-properties when i press test i get sound coming out of my speakers, my onboard sound is recognised in ossxmix, but i dont get sound anywhere else. Onboard soundcard is Realtek ALC883
View 1 Replies View RelatedI'm looking at upgrading my motherboard and graphics card. Ideally, I'd like to have 2 monitors running at once (DVI), and an output to an LCD projector (HDMI). If I can't have all 3 working at once, I'd like the 2 monitors on all the time (off the graphics card), and then switch from the monitors to the HDMI output so that only the projector is getting video.
So, If I get a motherboard with onboard HDMI, would it be possible to run the HDMI out at the same time as the graphics card output?
Over the last few days I've been spending some time converting my headless web server into a media center running Boxee for our lounge.
I have managed to get *nearly* everything working with the exception of sound. The computer has onboard sound, both front and back ports, and I tried every combination of outputs and plugs.
I also checked it wasn't muted, or anything like that.
So, I wasn't able to get it working with the stock Ubuntu 10.10 stuff - I turned to Google and found a thread which suggested I download and install this.
I ran the ./install as root, and it took about 3 minutes to install everything. Rebooted and now I'm left worse off than before - this time I actually have no sound card even listed.
I've been thinking some more, and after another hour or two reading through random threads, I think it may have been a mistake to install those drivers.
I couldn't find a way to uninstall them, so I've been reinstalling all the alsa and PulseAudio packages I can find with no luck.
Now I'm stuck with doubly no-sound.
If I can't get onboard working then I'm considering buying a new graphics card with HDMI out (the current one has a hard time with Boxee), or maybe a dedicated sound card instead.
I have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
I am trying to install a PNY GeForce 8500GT HDMI graphics card on an ACER desktop running Ubuntu 10.04. Acer support is nothing.Install card and neither the HDMI or standard monitor work.The fan on the card has power.Remove the card,plug old monitor back in,works fine. Is there a jumper on the motherboard to disable the onboard or something (Command)in terminal? First log is- dmesg, second log is- lspci .
[ 0.008345] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008348] CPU: L2 cache: 1024K
[ 0.008353] CPU: Physical Processor ID: 0
[code]....
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedJust installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
My sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device
In my ubuntu 11.04, the sound seems not so clearly, seems something bass.
It's OK in windows 7.
I don't know how to config the sound card, or, is there any drivers updates on my sound card?
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
Is there a driver for my onboard network card? According to Windows it is Realtec PCIe GBE Family Controller.
View 1 Replies View RelatedI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
I have had this problem for far too long, my onboard sound will not work, i went from Xubuntu, to Vista now to here! NO the mute is not on, it says i have sound but I dont! I did the lspci command and got this:
ALSO I have a custom built computer that came with a Rocket Fish sound card model RF-51SDCD that I rip out (no known drivers for that sound card). I have a Compaq Presario 061. Model number is DT076A-ABA S6200CL NA410. My motherboard is an ASUSTek Kamet2. The firmeware is Phoenix Technologies version 3.05 (cant find an update for that either).
I am facing problem with onboard lan card. i think its not detecting. when i type ifconfig command it shows below details
I have installed red hat. but not able to give ip.
I have just install Redhat Enterprise Linux5, 2.6 kernel,Foxconn motherboard,model 45GMX-V but Linux did not detect the Onboard LAN card.Although when i use winxp it detects the card as RTL8139/810x.
View 4 Replies View RelatedI installed Edubuntu 9.10 on a Dell Optiplex GX260. This system has onboard INtell 846G series video. I want to install an NVIDIA video card. I popped it in the case, diabled the onboard video. I get the POST, the GRUB, no problem. But once I get past the GRUB, all I get is a blank screen. The HDD does not sound like Ubuntu is loading.
View 9 Replies View Relatedthis morning after a reboot I made a discover. Clicking on tabs, launching applications, and so on, make annoying and stupid sounds from my speakers. CLICK, BOP, BLAP! Who decided to turn these things on? I'm listening MUSIC, I don't wanna those stupid sounds bother me! Anyway, I was suddendly on System -> Preferences -> Sound and I choosed Sound Theme: NO SOUND. But those annoying sounds are already there. And there's no way to disable them! Is this a BUG or what? Is there something to do?
I also discovered another thing: clicking on items that are at RIGHT of my screen, the sound come from RIGHT. Clicking on center, they come from center. Right, right. So I realize that sounds are stereophonic. And really I can't understand why a software developer choosed to waste his time coding a piece of code to do this, instead of solving the hundred millions of bugs we're affected from YEARS.
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies View RelatedI have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
View 6 Replies View RelatedI know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
I have two sound cards active on this machine and they both work fine. However I would like to blacklist one card from being used for audio capture in KDE, because I am already using it outside of KDE for timed recording. The problem is that when I start amarok while timed recording is going on, it attempts to probe the card and this causes the recording to abort.
In Configure desktop > Multimedia, I can see the two cards. I can alter the priority but the Remove button is greyed out. So I can't remove a card from phonon.
Searching around for where phonon stores its configuration led me to ~/.config/kde.org/libphonon.conf. This certainly looks like the info I was trying to edit, but it's encoded in some way code...
After I tried to make my onboard video card (radeon x1250) work with openGL (I didn't succeed), it went bad. I get this error when I attempt to start VirtualBox: VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: libatiuki.so.1: cannot open shared object file: No such file or directory Other software also misbehave.how to "reset" the video drivers?
View 2 Replies View RelatedI'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
The ethernet adapter on my Asrock H97M ITx/AC motherboard isn't recognized during install. It's a Qualcomm Atheros AR8171 and none of the available options like alx or e1000e are working.
I originally tried to install openmediavault [URL] .... - which is based on debian - from an USB Stick and only came up tothe point where it tries to recognize the network card. It couldn't and promted me to choose one manually. So I checked the specs of my motherboard (a shiny new Asrock H97M ITx/AC with a Qualcomm Atheros AR8171) and after a short search I narrowed it down to alx or e1000e. Both of which only triggered a short flash of the interface and nothing more. I guess that's linux' way of sticking its tongue out at me.
For the last 2 days I therefore searched high and low and came across many possible solutions that either didn't work or included too much linux lingo that I couldn't understand it.
One solutions was to install a vanilla debian and then somehow install OMV over it, but debian itself couldn't recognize the network card either. So now I have a pretty minimal debian (CD1 install only) running but how to make it recognize and use the onboard network device.
Just out of curiosity, I plugged in an old hard drive with Win7 that hasn't been updated for at least 10 months. It only had a driver for AR8131 and warned me of using that, but it worked totally fine. Debian however doesn't even try to use an old driver but just flashes its interface at me.
Is there a way to make it work or is this board just not supported by debian and I have to resort to some other distro or a windows installation?