Hardware :: Touchpad Not Working On X - Slackware Current
May 14, 2010
Alright, so I finally decided to test Slackware Current on my laptop. After this upgrade my touchpad does not work in X, but it does work in the terminal. The mouse section of my xorg.conf is:
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
[Code]...
If I cat /dev/psaux I get output when i move my touchpad around. I also ran cat on /dev/mouse and I also get output from that when i move my touchpad around. I also tried Protocol "Auto" instead of PS/2, and IMPS/2 to no avail. Also, to begin with I was using the synaptics driver, and i moved it back to the generic mouse driver, and still nothing.
View 1 Replies
ADVERTISEMENT
Dec 11, 2010
After upgrading to -current (using slackpkg), my touchpad scrolling won't work.I remember that this had solved my problem previous time and in fact, after upgrade I have changed nothing (since this file already existed there). When I check the /usr/share/hal/fdi/ policy/ 10osvendor/ directory, I see that no "11-x11-synaptics.fdi" file was present. I just copied the file from /etc/hal/fdi/policy into this directory, but this did not help. Can somebody guide me through this?
View 14 Replies
View Related
Jan 2, 2011
Just recently discovered that for a non-root user the touchpad on my Acer laptop ( Aspire 5720z fyi ) isn't working in X ( KDE or XFCE ). It does work in in tty (at login) and for root it works in both environments.
I'm running 13.1 x64 on it, with the normal security patches via slackpkg. Didn't notice before since I normally use a mouse (and thus I do like the touchpad being disabled so I don't 'tap' away the cursur while typing).
With the recent holidays (with family visits and all) I took the laptop on my lap,.and voila: no trackpad movement.. I did some searching allready, but this problem seems to be solved since a while, and isn't supposed to be in 13.1
FROM RELEASE NOTES Piter Punk for udev and slackpkg work, updating the shadow password system, writing the initial patch for polkit to use a shadow authentication backend so we could consider using KDE 4.4.3, and making tap-to-click work with Synaptics touchpads out-of-the-box,)
[URL]
/etc/modprobe.d/psmouse(.conf) allready has this commented line:
#options psmouse proto=imps
View 1 Replies
View Related
Jan 10, 2010
What happens is on first boot, my Synaptics touchpad is not being recognised by the Kernel, so I have to boot a second time when it will start working.I have followed and tried loads of advice from different threads, including the copying and editing of the 11-x11-synaptics.fdi file under etc/hal/policy. Also the psmouse proto=any trick. The rmmod and further modprobe of psmouse. Restarting both HALD and UDEV both later and earlier in the boot procedure . The results of all of which is the same. The touchpad only works on second and subsequent warm boots.Below is the output of cat /proc/bus/input/devices for cold and warm bootCold boot
Code:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
[code]...
View 14 Replies
View Related
Nov 20, 2010
I see the "starting calculator" icon but it just disappears after a few seconds. If gcalctool is run from a terminal it prints Code: GLib-GIO-ERROR **: Settings schema 'org.gnome.gcalctool' is not installed The way to fix it : Code: cd /usr/share/glib-2.0/schemas/ glib-compile-schemas .
View 1 Replies
View Related
Mar 14, 2011
On my netbook here, I did a fresh install of --current.
I cannot get hibernate to work, it seems to fall back to suspend.
In /var/log/pm-powersave.log I get this message:
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed
The netbook then seems to fallback to suspend at that point.
View 7 Replies
View Related
Feb 8, 2011
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]...
View 11 Replies
View Related
May 7, 2010
I am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.
View 2 Replies
View Related
Mar 5, 2011
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
View 9 Replies
View Related
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Dec 18, 2010
after several hours I've finally gotten slackware running! But the only thing I don't understand is how to configure the touchpad. In Ubuntu you can do it in the GUI, but I have no idea how to do it via Slackware.
I mostly want it to disable tap to click when I type, and enable horizontal and vertical scrolling. I've tried using synclient but that doesn't seem to work, and in any case I think that is only supposed to be a temporary fix anyway.
how to update packages I've installed? I installed wicd to use wireless for my laptop, but according to their website, it's best that I update it to the newest version because of some bug.
View 13 Replies
View Related
Mar 22, 2011
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
View 2 Replies
View Related
Jan 10, 2011
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
View 12 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Feb 21, 2011
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Jul 11, 2010
Just installed Slackware 13.1 and I'm trying to disable tap to click on my touchpad. When I run "synclient MaxTapTime=0" it turns off. But the next time I restart X, the settings won't hold. I tried putting Option "MaxTapTime" "0" in xorg.conf, but it didn't work. This is my mouse portion from xorg.conf generated from the nvidia driver from slackbuilds.
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
[Code]...
View 1 Replies
View Related
Oct 12, 2010
I login as root every time (its a closed system) and I am running it on a laptop. I want to disable the touch pad after typing for 4 seconds.I have tried adding this command:syndaemon -i 4 -dto rc.4, rc.local, rc.httpd, http.mysqld
View 7 Replies
View Related
May 28, 2010
Looking for opinions on what is the best way to disable the touchpad on a Sony VAIO. I just installed Slack64 13.1 and love it...
View 10 Replies
View Related
May 18, 2011
ASUS b43f with Slack 13.1, XFCE. Nothing in BIOS to allow me to do this.
View 4 Replies
View Related
