Ubuntu :: Onboard Sound Will Not Work
Jun 13, 2010
I have had this problem for far too long, my onboard sound will not work, i went from Xubuntu, to Vista now to here! NO the mute is not on, it says i have sound but I dont! I did the lspci command and got this:
ALSO I have a custom built computer that came with a Rocket Fish sound card model RF-51SDCD that I rip out (no known drivers for that sound card). I have a Compaq Presario 061. Model number is DT076A-ABA S6200CL NA410. My motherboard is an ASUSTek Kamet2. The firmeware is Phoenix Technologies version 3.05 (cant find an update for that either).
View 9 Replies
ADVERTISEMENT
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Aug 21, 2010
I have been trying to get my onboard sound working with OSS in gstreamer-properties when i press test i get sound coming out of my speakers, my onboard sound is recognised in ossxmix, but i dont get sound anywhere else. Onboard soundcard is Realtek ALC883
View 1 Replies
View Related
Mar 13, 2010
Ubuntu 9.10Code:$ uname -aLinux ubuntubear 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 GNU/LinuxI have ASUS M4A78-E motherboard. I've disabled Onboard sound card (VIA VT1708S) and installed Audigy sound card (c-media sb 8738 5.1 channel (CMI8738/PCI-6ch-LX)). But my system still detects Onboard sound card.
Code:
$ alsamixer
AlsaMixer v1.0.20 (Press Escape to quit)
[code]....
View 2 Replies
View Related
Dec 12, 2010
I use 64-bit Ubuntu Lucid. This machine has an onboard Nvidia sound chip (which can not be disabled in BIOS), I also have an Soundblaster Audigy 2 card, which i'd rather use.
Previously, this was impossible because Ubuntu could only configure the first card. However, with the event of 10.4 and the easy-to-use selector in Sound Preferences I was hopeful that it would work now. But no luck.
I should mention that this machine dual boots to Win XP, and the Audigy works like a charm there, so it must be a Ubuntu problem. The Audigy 2 card is detected by Ubuntu, and is selectable in Sound Preferences, playback is fine with no errors, the source appears in Sound Preferences, but no sound.
These are the steps I have tried, without success:
- Disable the on-board card in Sound Preferences
- Cranking all the sliders to max in Alsamixer
- Checking that there's no mute in Alsamixer, Sound Preferences, Volume Control
- Adding lines to the bottom of /etc/modprobe.d/alsa-base making the Audigy the default card (0), and the Nvidia secondary (1). The output of
Code:
Now reads:
Code:
View 3 Replies
View Related
Sep 8, 2010
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies
View Related
Jan 14, 2011
Over the last few days I've been spending some time converting my headless web server into a media center running Boxee for our lounge.
I have managed to get *nearly* everything working with the exception of sound. The computer has onboard sound, both front and back ports, and I tried every combination of outputs and plugs.
I also checked it wasn't muted, or anything like that.
So, I wasn't able to get it working with the stock Ubuntu 10.10 stuff - I turned to Google and found a thread which suggested I download and install this.
I ran the ./install as root, and it took about 3 minutes to install everything. Rebooted and now I'm left worse off than before - this time I actually have no sound card even listed.
I've been thinking some more, and after another hour or two reading through random threads, I think it may have been a mistake to install those drivers.
I couldn't find a way to uninstall them, so I've been reinstalling all the alsa and PulseAudio packages I can find with no luck.
Now I'm stuck with doubly no-sound.
If I can't get onboard working then I'm considering buying a new graphics card with HDMI out (the current one has a hard time with Boxee), or maybe a dedicated sound card instead.
View 9 Replies
View Related
Apr 12, 2011
I have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
View 2 Replies
View Related
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
View Related
Oct 8, 2010
I have a system with an on-board S/PDIF output (the one I want to use) and a ATI graphics card that has an HDMI output and therefore an own audio device./proc/asound/cards shows me the following:
Code:
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f8000 irq 16
[code]....
View 4 Replies
View Related
Feb 17, 2011
I am new to Linux and ran into a problem with no sound after a fresh install of Debian 6.0.
Here is what I get from my I/Os. (yes speakers are on, plugged in and all volume controls have been toggled and tweaked in every which way.)
Code:
View 1 Replies
View Related
Feb 13, 2010
I wanted to type something in french so I started the on board keyboard so I'll know where the letters are. Now my keyboard is locked, and the onboard doesn't work too... all I did was to click on some of the settings of the onboard.Sadly the onboard didn't show me the french keyboard, so that's a downer too.
View 1 Replies
View Related
Jul 27, 2011
I just bought a gigabyte sniper motherboard and when I installed ubuntu 11.04 it does not recognize my internet bigfoot E2100 1 x Bigfoot Killer E2100 chip.
View 5 Replies
View Related
Aug 5, 2011
I'm running Ubuntu 10.10 with an EVGA nForce 730i Intel mobo with onboard HDMI. Video output works. Audio output does not. I'm trying to output both to a Samsung HDTV.
I tried booting to a bootable drive with Ubuntu 11.04, and no audio.
I've essentially tried everything in every other thread. I'm using alsa mixer, I've muted S/PDIF, my settings all have HDMI output selected.
sudo modprobe snd-hda-codec-nvhdmi results in:
Code:
aplay -l results in:
Code:
aplay -L results in:
Code:
Also tried aplay -D to play a .wav, and heard no sound, but also encountered no errors.
View 9 Replies
View Related
Apr 25, 2010
I'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
View 6 Replies
View Related
Feb 26, 2014
I bought a used Dell Precision T3500 after I had a positive experience with it at a previous job. Since my AMD motherboard died recently, I'm interested in using the Dell as my full time machine.
However, I cannot seem to get my PS/2 keyboard to work; this is crucial as I use a fully mechanical keyboard and need my N-key rollover that PS/2 provides.
The weird thing is that the PS/2 keyboard works perfectly during a text-based installation of Debian GNU/Linux. When I boot into a newly installed system if I press any key on my keyboard my Caps lock and scroll lock LEDs flash and no keystrokes are registered (?).
View 14 Replies
View Related
Jun 12, 2010
I bought a used server and it's in great working condition, but I've got a 2-part problem with the onboard raid controller. I don't have or use RAID and want to figure out how to stop or work around the onboard SATA raid controller. First some motherboard specs.: Arima HDAMA 40-CMO120-A800 [URL]... The 4-port integrated Serial ATA Integrated SiliconImage Sil3114 raid controller is the problem.
Problem 1: When I plug in my SATA server hard drive loaded with Slackware 12.2 and linux kernel 2.6.30.4, the onboard raid controller recognizes the one drive and allows the OS to boot. Slackware gets stuck looking for a raid array and stops at this point -........
View 11 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Mar 5, 2011
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Sep 26, 2010
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
View 2 Replies
View Related
Jun 16, 2010
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
View 4 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
May 7, 2010
I have a Lenovo W510 loaded with Ubuntu 10.04 but it does not detect my onboard 3g modem
View 4 Replies
View Related
Jun 30, 2010
I build a HTPC from an old computer and installed Ubuntu 10.04LTS. I'm new to Linux and have spent a few weeks tracking down and fixing a few problems.t the moment I've exhausted my ideas as to why I have no S/PDIF output, I'm trying to use the onboard audio from my motherboard. I get sound from the analog output to my computer speakers, but when I connect the coaxial S/PDIF output to my amplifier I get no sound. tried removing and reinstalling ALSA, muting and unmuting outputs in ALSA, checked my amplifier settings and inputs, and probably a few other things I've forgotten. I also tried to follow the troubleshooting and howto guides to the best of my abilityHere's a list of what I have:OS: Ubuntu 10.04LTS
Motherboard: P4C800-Deluxe
Onboard Audio: SoundMAX AD1985 AC '97 audio CODEC supports 6-channel 5.1
CPU: P4 2.60GHz overclocked to 3.12GHz
Memory: 3gigs Dual DDR PC3200
GPU: GeForce 7800GS
HDD: 2, 160GB SATA HDD and 1TB SATA HDD
View 1 Replies
View Related
Mar 14, 2011
Is there a driver for my onboard network card? According to Windows it is Realtec PCIe GBE Family Controller.
View 1 Replies
View Related
Mar 25, 2010
how do i get the sound to work in ubuntu 9.10?
View 3 Replies
View Related
Mar 27, 2010
I just received Ubuntu 9.10 desktop edition in the mail this morning. I ran the CD "live" in my HP Pavilion TX2510us Laptop. The laptop has no hard drive due to it failing in the past, So I have installed Ubuntu on a 1 TB external Hard disk. While Running the CD "Live", before installing it, The sound was working. But now that it is installed and booted up it does not work. I did a few searches and came across a few command lines that may help you guys figure out what is wrong. As Follows:
shannon@shannon-laptop:~$ aplay -l
List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
[Code]...
View 8 Replies
View Related
May 17, 2010
I get no output from speaker-test, nor any other program I run to try and produce sound.
Some info:
lspci -v:
aplay -l:
alsamixer:
uname -a:
Linux rweinber-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux
Apt-get reports that I am as up to date as it is possible to be.
View 4 Replies
View Related
Aug 1, 2010
I cannot get my sound to work, I've looked around on the threads, but nothing as helped, but that could also be because I'm new at this.. Anyways, the thing I find weird about it is when I started it up, I could hear the startup noise of Ubuntu, but I can't hear anything else.
View 2 Replies
View Related
