Slackware :: Nvidia Driver Not Working On 64 Current?

Feb 8, 2011

my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0

[code]...

View 11 Replies


ADVERTISEMENT

Debian Multimedia :: Updating Nvidia Driver To The Current 275.09.07 Driver Version Break Setup?

Jul 7, 2011

Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?

View 3 Replies View Related

Ubuntu Multimedia :: Driver Showed The Nvidia 173 Driver And The Other One Showed "current" Nvidia Driver

Apr 22, 2010

i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.

after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.

View 3 Replies View Related

Ubuntu Multimedia :: NVIDIA-CURRENT Driver Activated But Not In Use?

Apr 29, 2011

I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.

View 9 Replies View Related

Ubuntu Installation :: 11.04 - X Will Not Load With NVidia Current Driver

May 1, 2011

After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.

What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is

Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]

Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.

View 5 Replies View Related

Slackware :: How Should Proprietary ATI Driver Be Installed On Slackware Current 64-bit?

May 15, 2010

I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?

View 6 Replies View Related

Debian :: NVidia Driver Install - GCC Kernel Not Matching Current Compiler

Aug 4, 2010

I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying:
"The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....."
Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?

View 8 Replies View Related

Slackware :: Virtualbox Current 32b Nvidia KDE(failsafe) Works But Regular KDE Does Not?

Mar 26, 2011

I have 13.1 on its own drive and works fine. I installed virtualbox in 64b windoz on a different drive with the same computer so I can play with all the different linux systems. Around 6 weeks ago I installed slack current from alien bobs mirror with no problems. An update a week ago? and kde would not work. KDE failsafe and all other desktops work fine.

View 5 Replies View Related

Slackware :: Installing NVIDIA 256.53 Driver In Slackware 13.1 - Unable To Get It Moved

Oct 9, 2010

I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.

View 1 Replies View Related

Slackware :: 64-current Could Not Get X To Start Correctly With The Nouveau Driver

Feb 6, 2011

After a fresh install of Slackware64-current could not get X to start correctly with the nouveau driver. When ever X started display was scrambled. Only kde would partially work with desktop effects enabled, but very slow. Without desktop effects enable kde was also scrambled. After trying several things and googling came up with the following. To get X to work created a nouveau-kms.conf file in /etc/modprobe.d with the following text.

Code: options nouveau noaccel=1 The one draw back to this solution is that Kde will not start with desktop effects enabled. Hopefully this will help someone else with similar problems. Maybe someone else has a better solution. video card: Nvidia Geforce 6150se nForce430

View 8 Replies View Related

Ubuntu Multimedia :: Updating NVidia Driver Not Working, Tried Manual, Not Working?

Sep 18, 2010

I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended

Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.

I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�

I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.

View 3 Replies View Related

Slackware :: Calculator Not Working In Gsb-current

Nov 20, 2010

I see the "starting calculator" icon but it just disappears after a few seconds. If gcalctool is run from a terminal it prints Code: GLib-GIO-ERROR **: Settings schema 'org.gnome.gcalctool' is not installed The way to fix it : Code: cd /usr/share/glib-2.0/schemas/ glib-compile-schemas .

View 1 Replies View Related

Slackware :: --current, Hibernate Not Working

Mar 14, 2011

On my netbook here, I did a fresh install of --current.

I cannot get hibernate to work, it seems to fall back to suspend.

In /var/log/pm-powersave.log I get this message:

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed

The netbook then seems to fallback to suspend at that point.

View 7 Replies View Related

Hardware :: Touchpad Not Working On X - Slackware Current

May 14, 2010

Alright, so I finally decided to test Slackware Current on my laptop. After this upgrade my touchpad does not work in X, but it does work in the terminal. The mouse section of my xorg.conf is:

Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"

[Code]...

If I cat /dev/psaux I get output when i move my touchpad around. I also ran cat on /dev/mouse and I also get output from that when i move my touchpad around. I also tried Protocol "Auto" instead of PS/2, and IMPS/2 to no avail. Also, to begin with I was using the synaptics driver, and i moved it back to the generic mouse driver, and still nothing.

View 1 Replies View Related

Slackware :: Auto Mount Is No Longer Working On -current?

Mar 5, 2011

I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't

View 9 Replies View Related

Slackware :: Onboard Sound VIA82xxx Not Working In Current And 13.1

Mar 24, 2011

I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.

Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.

[Code]...

View 9 Replies View Related

Slackware :: Can't Kill X For Nvidia Driver Install

Feb 8, 2011

I've been using Debian mostly for years now. Just got Slackware 13 (Xfce4) all set-up really nice. But I can't seem to "kill" or stop the x server to install the nvidia driver. I downloaded the one I know works for my older gforce4 card from the Nvidia website itself (the 96.43.19 one). In Slackware,..when I hit "Ctrl+Alt+F1,...it doesn't go to the prompt! I've tried everything I can think of in the Terminal,..but I admit, I don't really have a clue what I'm really doing,..and Google isn't really turning up much to go on. I even got the driver started in the terminal,...then it "fussed" at me for not killing x.

View 9 Replies View Related

Slackware :: Installing Nvidia Driver 13.37-amd64?

May 22, 2011

how to install this driver?

I disabled X server and I blacklisted nouveau kernel, but when I try to install the driver it says Error: Could not create the kernel module.

View 14 Replies View Related

Slackware :: Slackware 13.1 VIA VT1708S Audio Driver - Get Working Without Rebuilding The Kernel?

Jun 23, 2011

I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?

View 5 Replies View Related

Hardware :: Can't Install NVIDIA Proprietary Driver In Slackware 13.1

Oct 7, 2010

I've been trying to install the driver for my NVIDIA GeForce 6150SE nForce 430 in Slackware 13.1 with no success. I always get the same error report: the module you're trying to build does not match the kernel source or something like that. The result: unable to build module and the installation crashes.

I have tried to:set a custom kernel source path, install it with the slackbuilds driver and kernel, extract the contents and trying to compile it myself, find possibly conflicting drivers or modules, use different versions of the same driver (I've tried installing the versions 256.53, 256.44, 195.36.31 and 173.14.27)recompile the Linux kernel in an attempt to make sure that the tools used to build the kernel were the same used o build the module.

The only time I got a different error message was when I used the slackbuild packages. It built the 'nvidia.ko' module, but it didn't work. I got a version magic notice when booting and, when I tried to start x, a fatal error "no screens were found."

Just to be sure, I made a clean full install of Slackware (only added WICD to be able to download the drivers and ran slackpkg update and upgrade all) and tried again. It didn't work.

View 14 Replies View Related

Slackware :: Succesfully Running 2.6.32 With The Proprietary NVIDIA Driver?

Dec 15, 2009

I've been trying to figure out the cause of system hangs with slack 13 for a a week or so. I get random total freezes with the keyboard LED's blinking at me and the only solution is to do a hard-reset. I was using a self-compiled 2.6.31.6 kernel on 32bit Slack with similar results, but thought it had more to do with several bad starts as I got used to Slack's way of doing things... eventually I decided I'd made enough bad starts with that installation and after reading a bit about _current fixing some stability issues added another installation to my machine using Slackware64 and upgrading to _current. It worked great, then I installed the NVIDIA proprietary driver. The system hangs are back.

Sometimes they happen quickly, sometimes they take hours, sometimes while I'm working, sometimes when the machine has been idle for hours. For a couple of days I've been going back and forth between the NVIDIA propreitary and the nv driver. I've run memtest86 for 4.5 hours and not a single error, I'm running this on a new HD, I even upgraded the case fan (the old one was starting to complain!).

I've also installed different versions of the driver 185.x.x, 190.42.x. I've used slackbuilds, I've used "sh NVIDA.xxx.RUN" I've said "yes" to everything the installer asked, I've said "no".

So far no hangs with the nv driver. I've been leaving one or the other running at all times and no hangs with the nv driver, but within hours with the proprietary driver.

All that is to say I'm confident the issue is with the NVIDIA proprietary driver, OR something in my kernel options that only shows up when I'm using the NVIDIA driver.

Is anyone else running this successfully?

SLACKWARE64 kernel 2.6.32 (same behavior on 32bit with 2.6.31.6) compiled kernel with "make oldconfig" then "make localmodconfig" BEFORE the NVIDIA driver was installed. ext3 filesystem (same behavior with ext4 on previous installation)

View 14 Replies View Related

Slackware :: Just Installed The Nvidia Driver And Now It Won't Remember My Settings

Mar 15, 2010

I finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).

Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.

No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.

It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.

My xorg.conf is below.

xorg.conf:

Code:

View 3 Replies View Related

Slackware :: Unable To Enable Composite With Nvidia Driver

Feb 10, 2011

I am not able to enable composite with the nvidia driver. And a few other issues that I been able to get around but so far the nvidia driver is my main problem.

View 21 Replies View Related

Slackware :: Not Able To 'click' With Touchpad After Installing Nvidia Driver

Jan 2, 2011

After compiling the 2.6.36.2 kernel and re-installing the Nvidia proprietary drivers, my touchpad has started to act strange; the cursor seems to glide a lot faster, yet more erratic and when I try to hover over an icon the cursor wont stay still, furthermore I lost the ability to 'click' on anything using just touchpad.

I have checked dmesg and Xorg.log for any clues, as well as removed everything with the exception of the card and device section from my xorg.conf. The issue has nothing to do with compiling the new kernel, as it was working perfect until I installed the Nvidia driver.

View 1 Replies View Related

Slackware :: Proprietary Nvidia Driver Crashes - 13 X86_64

Jan 23, 2010

I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.

View 14 Replies View Related

Slackware :: Steps In Setting Up A New Kernel With Nvidia Driver?

Oct 25, 2010

I'm running Slack64 13.1 and I'm in good shape with the 33.4 kernel, but if I upgrade the kernel to 35.x what do I need to do to get it working with my Nvidia 7300GT? I have the nvidia installer, NVIDIA-Linux-x86_64-260.19.12.run. Do I just do from the stable repo

Code:
slackpkg upgrade
then boot to run level 3 and run NVIDIA-Linux-x86_64-260.19.12.run? Thanks for your help.

View 5 Replies View Related

Slackware :: Xorg Segfaults With NVidia Driver After Upgrade To 13.1

Jun 5, 2010

Upgraded from 13.0 to 13.1 following the instructions. Downloaded latest nvidia package (NVIDIA-Linux-x86-96.43.16-pkg1.run) for my geForce4 MX 4000. Compiled and installed new module (old one was 96.43.13).

Xorg fails to start with this:
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux mercury 2.6.33.4-smp #1 SMP Wed May 12 21:39:37 CDT 2010 i686
Kernel command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 3
Build Date: 05 May 2010 01:54:53AM

Current version of pixman: 0.16.6
Before reporting problems, check [URL]
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.....

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80a1e6b]
1: /usr/bin/X (0x8048000+0x57b75) [0x809fb75]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe40c]
Segmentation fault at address 0xc

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
The "nv" driver works.

View 4 Replies View Related

Fedora :: 11 + Nvidia Driver Not Working?

Oct 6, 2009

I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:

Quote:

X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686

[code]....

Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.

View 8 Replies View Related

Slackware :: Completely Uninstall Nvidia-driver And Reinstall Default?

Apr 12, 2011

I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu.
I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck.
I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...

I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers.
Do you have any idea how to do it?

View 8 Replies View Related

Slackware :: Nvidia Wrong Resolution After Installing Proprietary Driver

Apr 26, 2011

I'm new to linux, and i have installed linux slackware 64bit..after a complete setup i downloaded the latest Nvidia proprietary drivers, the binary package from nvidia.com..i have a geforce gts250..it's the first time i encounter this issue..i have already installed the driver with my old monitor (an lg flatron with max 1680x1050)and it always worked fine..with this new monitor (lg w2243s with a res of 1920x1080) it seems that every bin package from nvidia don't recognize the monitor...after installing i find a res of 640x480 and i get stucked, i tried to force it by editing the xorg.conf file..but nothing changes..how can i get the max res with nvidia bin package?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved