Slackware :: --current, Hibernate Not Working
Mar 14, 2011
On my netbook here, I did a fresh install of --current.
I cannot get hibernate to work, it seems to fall back to suspend.
In /var/log/pm-powersave.log I get this message:
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed
The netbook then seems to fallback to suspend at that point.
View 7 Replies
ADVERTISEMENT
Oct 17, 2010
I'm using stock 32 bit current on a AAO D250 netbook. I'm running into a video issue after upgrade to the recent 2.6.35.7 kernel that doesn't exist after resume from suspend. The condition shows as a broken display that shows a black screen on the left with the KDE desktop partial exposed on the right side. Weird! My only fix so far is to blindly ctrl-alt-f6, login as root and reboot. The screen does not show the console screen during this reboot process
The pm-suspend logs show a clean hibernate and a clean thaw so that's no help. I've checked modprobe.d and don't have any alterations to any of the modules. The video module loaded is the intel_agp which sound right. I'm stumped at the moment.
View 14 Replies
View Related
Nov 20, 2010
I see the "starting calculator" icon but it just disappears after a few seconds. If gcalctool is run from a terminal it prints Code: GLib-GIO-ERROR **: Settings schema 'org.gnome.gcalctool' is not installed The way to fix it : Code: cd /usr/share/glib-2.0/schemas/ glib-compile-schemas .
View 1 Replies
View Related
May 14, 2010
Alright, so I finally decided to test Slackware Current on my laptop. After this upgrade my touchpad does not work in X, but it does work in the terminal. The mouse section of my xorg.conf is:
Code:
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
[Code]...
If I cat /dev/psaux I get output when i move my touchpad around. I also ran cat on /dev/mouse and I also get output from that when i move my touchpad around. I also tried Protocol "Auto" instead of PS/2, and IMPS/2 to no avail. Also, to begin with I was using the synaptics driver, and i moved it back to the generic mouse driver, and still nothing.
View 1 Replies
View Related
Feb 8, 2011
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]...
View 11 Replies
View Related
Mar 5, 2011
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
View 9 Replies
View Related
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Jun 23, 2010
I'm using the version 13 of Slackware. I can't suspend or hibernate my OS. I need something named HAL.
Searched a bit on the net but couldn't really figure something out.
View 5 Replies
View Related
Mar 22, 2011
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
View 2 Replies
View Related
Jan 10, 2011
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
View 12 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Feb 21, 2011
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Jul 26, 2010
I have some problems getting some of the buttons on my Thinkpad working properly. Volume buttons, thinklight, etc. work through tpb. It's the other buttons (sleep, hibernate, etc.) that are causing problems. The wireless radio button also works. I can hibernate and suspend successfully from the command-line using pm-suspend, etc. I have copied the 30-keymap-module-thinkpad-acpi.fdi file to /etc/hal/fdi/policy, where it sits alongside my UK keyboard layout policy (10-keymap.fdi). In this file, I have edited the 'radio' button to call a 'bluetooth' event instead, but it seems to be ignored and pressing Fn+F5 toggles both bluetooth and wlan radios and not just bluetooth... Is there something I have to do to merge the 2 files together? Or do I have to rename the thinkpad .fdi file so I have 10-keymap.fdi and 30-keymap.fdi?
I have the tpb daemon running but it's set not to block keystrokes and when I run xev and press the key combination for sleep, it reports 'xf86sleep' correctly, hibernate reports 'xf86suspend', etc., so I know the keys are getting recognized in some form... However, it seems that the HAL daemon is not picking up these events and running the corresponding commands. I am a member of the 'power' group, nevertheless, even running as root does not seem to make any difference. Finally, I am running wmii as a windowmanager with no desktop environment, and none of these buttons is configured in the window manager. hald should be picking up the events but it seems it isn't
View 1 Replies
View Related
Apr 29, 2011
I have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
View 7 Replies
View Related
Oct 15, 2010
My suspend and hibernate buttons are not working. When I try to return from a suspend, I do not get a kernel panic, but nothing loads onto the screen.
View 7 Replies
View Related
Jul 10, 2011
I've installed Ubuntu Natty on my new lenovo laptop, and hibernate isn't working.Problem: When I click hibernate, the computer shuts down ok. When I boot it again, it seems as if hibernate is resuming (I get the blank purple screen), however the computer restarts again, and now boots as if I had shut it down(ie none of the programs are open).Also, programs (such as google chrome) that were open when I hibernated show that the program did not exit normally.
View 5 Replies
View Related
May 25, 2011
Currently running Slackware 13.37 64-bit on a notebook and finally have suspend/hibernate after realizing that USB devices, especially USB HDDs, need to be disconnected before suspend/hibernate can work. Problem is I have 2 USB HDDs that are connected to my notebook whenever the notebook is stationary for the extra storage so I'd like to create a script that would get invoked that would stop the suspend/hibernate process if certain partitions are mounted. I know what I would like to accomplish, but I have basic scripting knowledge
1. script would basically store a user specified string containing devices that are non-USB, ie: $NONUSB="/dev/sda /dev/sdb"
2. possibly use /etc/mtab to get a list of what is currently mounted and then remove lines containing whatever is specified in $NONUSB and store those values in $USB
3. run a for loop that executes 'umount' on each token in $USB
3a. stop suspend/hibernate process if 'umount' fails at any point
3b. if 'umount' passes then suspend/hibernate
View 1 Replies
View Related
Jun 6, 2010
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
I've installed nvidia dkms support.
View 3 Replies
View Related
Jan 5, 2011
says wireless unavaliable, do a ifconfig and it doesn't show up.
need to restart computer to get wireless back.
or even a command to run to restart the wireless (/etc/init.d/networking restart doesn't work)
wireless chip: RT2500
View 9 Replies
View Related
