i have an problem regarding yum in fedora 14when i used todate or install any package,then i would get a problem but i unable to get it resolved this,theis follwing:::root@localhost amit]# yum update [ANY PACKAGE]Fatal Python error: pycurl: libcurl link-time version is older than compile-time versionAborted (core dumped)
View 2 Replies
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
How do I enable SSI (Server Side Includes) in fedora 12 ?
View 6 Replies View RelatedI m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
I am trying to start FTp service both from Terminal and Cpanel interface but unable to start. it says cannot start ftpd service. contact administartor
It's Redhat Linux can anybody help me to fix this issue?
I have a linux server.I am not able to ping this server.The message that I am getting when I try to ping this server from my machine is
Pinging 172.26.134.167 with 32 bytes of data:
Reply from 172.26.134.176: Destination host unreachable.
Reply from 172.26.134.176: Destination host unreachable.
[code]...
This is very old topic but despite of trying out all possible solutions available on net and forums, I am not able to setup tftp server on my 2.6.32.11-99.FC12.i686.PAE. Is there something obvious missing out.
/etc/xinet.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer
# protocol. The tftp protocol is often used to boot diskless
# workstations, download configuration files to network-aware printers,
[Code]....
I'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
I am unable to run remote desktop from my fc 13 server, to my laptop. I have read the remote desktop setup and added port 6000 to firewall, added host name of server to xhost (nick@192.168.1.110). Added the line to /etc/gdm/custom.conf like in fedora guide (DisallowTCP=false). But i still get the error
[nick@pc1 ~]$ xclock
No protocol specified
Error: Can't open display: 192.168.1.101:0
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
Code:
tftp your_pc_ip_address
I've setup an NFS share on my Fedora 15 host of which Google'ing told me that it had changed radically from the old NFSv3 config. Ie. no more /etc/hosts.allow or /etc/hosts.deny files.....My current setup is this..../etc/sysconfig/nfs:
Code:
#
# Define which protocol versions mountd
[code]...
For some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
View 2 Replies View RelatedI'm using FC12 with kde and cannot update the system time using the gui. The error is :Error unable to contact time server. How do i get it to work for the rest of the family who do not want to mess aboutcli mode?This does work from the terminal:ntpdate -u ntp.exnet.com so client software is present and correct leaving me at a loss.
View 4 Replies View RelatedI recently did a clean install of Fedora 11 (from Fedora 10). In Fedora 9 and 10 I used a remote font server so that I could launch HP OpenView over a VPN tunnel. The procedure would go something like this:
*connect to VPN
*xset +fp tcp/<hp_ux_server>:7000
*ssh -X user@hp_ux_server
*launch OpenView
OpenView requires the fonts that are installed on the HP-UX server, hence the need for the xset command. Now since the installation of Fedora 11, I cannot get the xset command to work.
xset fp+ tcp/<hp_ux_server>:7000
xset: bad font path element (#23), possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
I have turned off the firewall to make sure it wasn't blocking the request. But to no avail. I have also had two other people with Fedora 11 machines try this, they get the same error. Were there major changes in the X server from Fedora 10 to 11+?
I try to install my Fedora 12 machine from my http server.but i fail to install it on the client side machine give me a error like
unable to retrieve.Here is the step what i did.
1)I copy the entire my rpm of F12 DVD to the /var/www/html/rpm
2) and start the http server (my http server is start without any problem).
3)on the client side machine i booted from f12 dvd after askmethod i select url.
4)and enter the ip address of 192.168.10.2(for client ip address),192.168.10.1(gateway),and 192.168.10.1(nameserver)
5)after that i enter the [URL] this is my http.conf file
<VirtualHost 192.168.10.1>
ServerAdmin root@server.homepc.com
DocumentRoot /var/www/html/
DirectoryIndex index.html
ServerName server.homepc.com
</VirtualHost>
Note => i configure the dns server on 192.168.10.1 machine , and this machine is also a my http server.
192.168.10.1 has a domain name of server.homepc.com
192.168.10.2 has a domain name of client.homepc.com
I use F10 at home and while away from work on my laptop. Recently I could get the VPN sorted out ( I can now connect to the vpn (ppp0) server at work from home or anywhere else). I am trying to mount a windows folder that is on the work server on my F10 box at home through the VPN connection that is first established.What I know about the windws server
servername
sharename
username
password
When I try this
sudo mount -t cifs //pxxxx/home/abcd /mnt/dir/ -o username=abcd,password=xxxx
I get this error
mount error: could not resolve address for pxxxx: Name or service not known
No ip address specified and hostname not found
I think the VPN connection is established successfully. I have a ppp0 connection under ifconfig with an IP address after vpn connection is established.In windows I just map the network drive (\pxxxxhome) username=abcd, password=xxxx and mount the folder as "abcd on pxxxxhome"
Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
My CUPS server has hung. Doesn't ask login user/pwd any more - goes straight to admin page. When I try to add printer I get an authorisation error. So unable to do any admin functions: add printers, disable Kerberos authentication etc.
View 1 Replies View RelatedI restore tape backup on my Linux server. At the time of booting the server it cannot able to read the filesystems.
I am getting the following message,
Code: Your system appears to have shutdown uncleanly
Forcing file system integrity check due to default setting
Checking root filesystem
fsch.ext3: file system has unsupported features (S) (/)
e2fsck: Get a never version of e2fsck! (FAILED)
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
I can successfully connect to a remote Windows Computer using Terminal Server Client but I cannot save the profile (Fedora 12).This means I have to enter the details every time I wish to connect. As I have many different remote locations I need to access on a regular basis is there any way to save the profiles?
View 6 Replies View RelatedMy network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies View RelatedI'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies View RelatedI use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I am not able to connect samba server from other linux pc giving error: NT Authentication Failure
But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View RelatedI have tftp-server running on Centos 5. Clients which are on the same subnet as the server are able to get and put without problems. I have a client that is across the internet that is having trouble getting files from my tftp server. A tcpdump reveals that the client is requesting the same file over and over again. In /var/log/messages, I am see the following error repeated over and over until the client finally gives up.
localhost in.tftpd[12727]: tftpd: read: No route to host
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
I am unable to use ncftp command I have defined all variables used. i have to copy the data to another server FTPS. When i am executing this command it is throwing error
ncftp -u : option unknown
I am copying total script what i am executing in my server. Please some one tell me is there any pistake in using the ncftp command , or tell me some other commands to copy data to remote server
BAK="/opt/DBbackups"
NOW=$(date +"%d-%m-%Y")
FTPU="username"
FTPP="password"
[code]....
