Fedora Networking :: Unable To Mount Windows Server Folder
Apr 29, 2009
I use F10 at home and while away from work on my laptop. Recently I could get the VPN sorted out ( I can now connect to the vpn (ppp0) server at work from home or anywhere else). I am trying to mount a windows folder that is on the work server on my F10 box at home through the VPN connection that is first established.What I know about the windws server
servername
sharename
username
password
When I try this
sudo mount -t cifs //pxxxx/home/abcd /mnt/dir/ -o username=abcd,password=xxxx
I get this error
mount error: could not resolve address for pxxxx: Name or service not known
No ip address specified and hostname not found
I think the VPN connection is established successfully. I have a ppp0 connection under ifconfig with an IP address after vpn connection is established.In windows I just map the network drive (\pxxxxhome) username=abcd, password=xxxx and mount the folder as "abcd on pxxxxhome"
View 3 Replies
ADVERTISEMENT
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Mar 2, 2010
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
View 5 Replies
View Related
Aug 17, 2009
Linux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".
View 6 Replies
View Related
Jan 15, 2009
We are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"
View 8 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Mar 21, 2010
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
Dec 15, 2010
I spent all day learning some concepts of Samba which I left while preparing for RHCE.One of them is how to permanently mount (fstab entry) windows shared folder.Manually mount command is running fine for me.
View 6 Replies
View Related
Jun 28, 2011
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies
View Related
Aug 20, 2009
My network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies
View Related
Sep 29, 2010
i need to always mount the user share of my Windows server at Ubuntu login.
This is my server struture:
Server
|-Group1
| |-user1
|
|-Group2
|-user2
ive found that i need to configure pam mount and i have this example:
<volume user="user" fstype="smbfs" server="krueger" path="public"
mountpoint="/home/user/krueger" >
but i dont know what to change relative to my server folder struture.
View 9 Replies
View Related
Aug 18, 2011
I mounted a shared windows folder from my LAN, and I changed the mount point's ownership on Linux using command line `chown me:me windir`. but when I enter the mount point, and to create files, it mentioned me 'Permission denied', but the file is actually created on the windows' folder, and its ownership is root:root.
this problem puzzled my programs going to run on it. cause them will detect a system returned error, and terminate in a abnormal way.
View 3 Replies
View Related
Jul 3, 2009
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
View 1 Replies
View Related
Jan 2, 2010
I have two computers running Ubuntu 9.10, both have one shared folder. These were set up via Nautilus.
On computer 1 I can see and use the shared folder of computer 2 just fine.
On computer 2 I can NOT see the shared folder of computer 1 anymore since recently. I has worked in the past.
Some more information: the name of computer 1 is "daniel", the share name is "gedeeld". So the address of the shared folder of computer 1 would be smb://daniel/gedeeld/
Opening this address in Nautilus works fine on computer 1 (that shares the folder), but results in an error on computer 2.
Error: failed to mount Windows share. Please select another viewer and try again.
View 1 Replies
View Related
Mar 27, 2011
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
View 12 Replies
View Related
Aug 22, 2010
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
View 1 Replies
View Related
Feb 27, 2010
I have a windows XP Pro machine and also a Server running ubuntu, the server was built for me and the builder is no longer available for consultation. The server drives which were on my desktop beside my C drive were working flawlessly allowing me access until windows started running quite badly which meant I had to reinstall it. After the reinstall I could not see the drives displayed and I am unable to access them from windows. And also not able to mount them. The server has not been switched off at any time and does not even have a monitor or keyboard or mouse. I have not done anything to change any settings to it. I have zero knowledge of the system. My windows administrator password is exactly the same I have looked on the server and my files are intact I just cant access them from windows which I need to do.
I got the following details off the server:
KERNAL LINUX 2.6.27.5 - 117. fc10.i686
GNOME 2.24.1
MEMORY 881.4 MiB
Processor AMD LE 1620
Samba Server Version 3.2.4-0 fc10
I was told the drives should appear on their own but that's not happening I am not able to sight them at all file sharing and printer sharing is enabled.
View 3 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Nov 16, 2010
I'm installing things in a new Red Hat server and saw that the /var folder is full (100%). I need this folder to have more space or another kind of solution because this server is going to be used as a print server.
View 7 Replies
View Related
Oct 4, 2010
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
View 10 Replies
View Related
Mar 21, 2010
I'm trying to connect to the other computers on the network in my house, but, when I try to view the main file folders it tells me "unable to mount location: failed to mount windows share" I've looked everywhere I can think of and have done everything they've told me to do, and I still can't get it to work.
View 9 Replies
View Related
Jul 12, 2011
I've setup an NFS share on my Fedora 15 host of which Google'ing told me that it had changed radically from the old NFSv3 config. Ie. no more /etc/hosts.allow or /etc/hosts.deny files.....My current setup is this..../etc/sysconfig/nfs:
Code:
#
# Define which protocol versions mountd
[code]...
View 4 Replies
View Related
Jun 18, 2011
I keep getting this, ever time I try to map a shared drive on other systems with my small network. 'unable to mount location failed to retrieve list from server'. This used to work.
Main System UNBUNTU 10.10, GNOME ver. 2.32
Sys2 Windows XP Pro, SP3
Sys3 Windows XP Home SP3
[code]....
Mine is used as a server for the above, and also for me to work on. For some reason, I keep getting permission failure. Setting up a share on sys2. sys3, sys4, sys5 can see and read it. My main sys cannot. None of the systems can see the Main one & the main one cannot read any of the others.
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
[code]....
View 1 Replies
View Related
Jul 21, 2010
I have a Samba server running on Slackware 13.0 and its service running with diskspace mounted on a Windows XP machine. Is it possible to mount the XP diskspace on the Samba server?
View 3 Replies
View Related
Oct 18, 2010
My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop.
THE REASON:I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
THE PROBLEM: After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message: Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
View 3 Replies
View Related
Sep 1, 2011
It seems this is a common problem. I used Samba to configure and connect the computer running Ubuntu 11.04 with my Windows Visa workgroup. This is a wired, not wireless, connection.
In Ubuntu, under Network, I can see the name of the other computer (NOVA_MORAI), but when I click, I get the error:
Unable to mount location - Failed to retrieve share list from server
I tried the nmblookup command, here is the output:
eleos@Planet-Morai:~$ nmblookup NOVA_MORAI
querying NOVA_MORAI on 192.168.1.255
192.168.1.2 NOVA_MORAI<00>
And:
eleos@Planet-Morai:~$ nmblookup -A 192.168.1.2
[Code]....
There it it. But when I try the findsmb command, it does not show up.
The error message seems common, but I have been trying solutions all day, and I am still not getting a connection.
View 4 Replies
View Related
Sep 21, 2010
Is there a way to mount a Windows Share into a Linux folder? I'm using OpenSuSE 11.1.
View 4 Replies
View Related
May 4, 2010
I have beating my brains out trying to get Lucid Lynx connected to an SME Server 7.4 to automatically mount windows shares. The winbind stuff seems to work okay after I installed a restart script in /etc/network/if-up.d (kudos to OsGnuru & bobpaul for that) There is a short wait on network up before winbind can validate but that is not a show stopper. I have looked at (what I think) is the correct log for pam_mount and it seems to be running through to the end process okay. It looks like it is either not reading the pam_mount.conf.xml file or I have not configured it correctly as it just reports "No Volumes to Mount". I have appended the log file, pam_mount auth, password, session & common conf files as well as the pam_mount.conf.xml file for review.
View 1 Replies
View Related
Jun 18, 2011
Was trying out Fedora 15 but could figure out something: How do I share a folder?
When doing some Googling all I could find were forum posts on how to manually configure samba with smb.conf (a place I refuse to go, its 2011 people), and gnome-user-share which only shares ~/Public and doesn't show up on my Windows computer.
I do know that at least in Ubuntu 10.10 with Gnome 2 all I had to do was right click on a folder at click Sharing. I'm looking for similar ease of use in Fedora.
View 1 Replies
View Related
