For some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
View 2 RepliesI would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.
View 1 Replies View RelatedOn a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
I am not able to find following packages:
1.libc6-dev-i386
2.lib32ncurses-dev
3.ia32-libs
4.lib32z-dev
5.lib32readlines-dev
Does any one know if package names have been changed?
I need to install build-essential which needs for it g++ package which needs for it gcc package 4.3.2-2 and for this I need gcc-4.3 4.3.2-1 and I can't find this package anywhere. I keep finding gcc-4.3 4.3.2-1.1 but after I install it it doesn't help me and gcc 4.3.2-2 still requests gcc-4.3 4.3.2-1.
View 11 Replies View RelatedI am trying to install dhcp server on F12 with yum, but at the time I issue yum install dhcp, I got the following message:
Transaction Summary:
Install 1 Package(s)
Upgrade 0 Package(s)
Total size: 821 k
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
file /usr/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686
file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686
And I see that if I uninstall the dhclient package, I will lose my networkmanager, which I also need, is there a way to have a dhcp server as well as dhclient utility on fedora as it is possible on rhel?
I've enable the universe deb in /etc/apt/sources.list yet i still can't find 915resolution. However I've manage to download the source and make install which result in /usr/sbin/915resolution, but when I type 915resolution -l no such command was found. Why?
View 2 Replies View RelatedI have setup an dhcp server wich allows ICS, and a samba server as a PDC. I can access the shares from windows if I type the server Ip (ej. \192.168.0.1), however if if write the address (ej. \dbaserver) I cannot access them.If I type ping dbaserver on a command prompt, it returns 127.0.0.2 not 192.168.0.1, what could be wrong. I asume because of this I cannot join the domain also.
View 4 Replies View RelatedI'm trying to get the source package xserver-xorg-video-ati. My sources.list looks like this:
[Code]...
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View Relatedi have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View RelatedThis dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedJust installed Ubuntu Server (Natty) and tried:
Code:
sudo apt-get install apt-proxy
But I only got:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apt-proxy
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
Where is it?Cant find vlc in package manager?
View 2 Replies View RelatedHow to check or find the real package name which must be installed for errors below:
There are to many package name if i search using (example) "yum search PythonLibs" or "yum search Threads" or "yum search Libintl". Even sometimes, the yum cannot find what we looking for exactly.
I am trying to install Ubuntu server edition on an old HP XT963 that recently came into my possession. I mainly just wanted to use it as a home file server and print server. I have been running ubuntu desktop on my laptop for a little under a year, but this is my first go at the server edition.
While ubuntu was installing it said "network autoconfiguration failed," I hit continue, thinking I could figure out how to configure it later. After lots of googling I still haven't figured out what exactly is wrong.
Code:
auto lo
iface lo inet loopack
after googling around I made it look like:
[Code]...
I would like to provide more information such as ifconfig and any other commands but I'm not exactly sure how I would do that without being able to copy/paste. I guess I would have the command dump the output to a file, but I'm not familiar with the -options this being my first time CLI-only.
I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.
Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:
Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
[Code].....
I am trying to set up a DHCP server for a network that does not go on the internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the internet. No matter what I do when I try to start the dhcpd service it fails[root@pcrepair ~]# service dhcpd startStarting dhcpd: [FAILED]here is my current config file
# specify domain name
option domain-name
"server.world";
[code]....
Code...
In what package does uno exist?
I'm using yum install libxml2 and it says it's already installed. I need to configure php with the location of libxml2. Is there a yum command to show me where the libxml2 installation folder is? or any other package example apache ...etc.
View 2 Replies View RelatedI installed Fedora 15 on a Vostro 3350 but the fan is always on. I know that the i8kutils package may solve the problem, but I can't find a stable package for Fedora 15. Did someone comes up with a solution,
View 14 Replies View RelatedI'm new to F15, and can't seem to find the package manager. I want to install Firefox.
View 4 Replies View RelatedI am going to install debian on my laptop. I just wondering that i am not able to see differentiation between debian installation package for server or desktop? are debian server and desktop edition included in one package ?
View 2 Replies View RelatedI have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View Related