Fedora Networking :: Unable To Configure The Proxy Server And Authentication?
Aug 9, 2011
Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
I am using a reverse proxy on Debian Lenny and using apache2.
I have a site Code:
And a site
Code:
Two files in Code:
Code:
But the problem is [url]and [url]are both pointing to [url] I am unable to find why.I do not want to touch apache2.conf so want to go by having a VirtualHost site1.[url]
I intergrated the CAS on Liferay, it is working fine for single service. Now my goal is to configure Proxy Authentication on CAS to authenticate set of Liferay Services. I used the following services for proxy authentication, but unable to validate it.
how-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
ran an internet cafe and last week my windows server got fried because of power surge. Now i got Fedora 14 running on another PC and i want to set it up as a full caching proxy server, so other computers can connect through it to the internet. I have 2 network cards inside.I'm really new to Linux and now learning my way around. I managed to install squid but don't know how to configure it to suit the purpose above
The problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
I am unable to connect to the Internet in lucid via a proxy server using apt-get or synaptic. Opera & firefox connects to the internet fine with the proxy setting.
I have tried the following solutions:
1) set proxy setting using systems|preferences|network proxy
2) editing ~/.bashrc & /etc/.bashrc
3) creating a /etc/apt/apt.conf file.
4) putting the proxy setting in synaptic
For the proxy setting I have used the both the verbose name as well as the ip address. There is no logon requirements for the proxy server. Either formats work in the browsers.
I am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I need to enter credentials for a system wide proxy, on a fresh install of Kubuntu 10.04. Everything hunky dory, but: Network Settings->Proxy->Authorization has 'username:' and 'password' grayed out all the time; even at 'Manually specify ...'. The only 'alternative' (not to chose from) is 'Prompt as needed'. But I don't get any prompt, and so I'm out of luck. To me, this looks like a bug. Because one should be able to enter a username and a password there, for good.
I am using Fedora 12-i386 in my laptop and have installed teamviewer5 for linux. I am unable to connect teamviewer. It always says, "Not Ready, Please Check your Connection". My network needs a proxy authentication. Teamviewer for Windows works well in my desktop having Win XP, in the same network.
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive 2. use server's external ip instead 3. get external ip address from the following address: XXXXXX.dyndns.org 4. ask opearting system for a port 5. test result:
i have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
I want to Configure Linux LDAP Server for user authentication when my users want to connect to the internet.Also i don't want the user to get the home directory on server. i configured ldap server and ldap client without PAM & SASL.and now with perl i can search in ldap for my client's username & password in ldap.
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter ddns-update-style interim; ignore client-updates;
I have a question to masters of Apache. In my operating system (CentOS 5) I have installed two Apaches. One is Apache (port 80) from repository where I planning to configure proxy and second one is Apache integrated(port 8090) with KnowledgeTree software. The problem is that when I am trying to configure proxy reverse it simply doesn't work.
This is link to KnowledgeTree software: - http://127.0.0.1:8090/knowledgeTree
This link I would like to rewrite with proxy like this: https://myserver.com/knowledgeTree (HTTPS dont forget)
In my ssl.conf in VirtualHost part I have created something like this: Code: <IfModule mod_proxy.c> <Proxy *> Order allow,deny Allow from all </Proxy>
Is there anything like a persistent caching proxy available in linux for me to configure, ie not public? (persistent meaning the cache remains in hard disk between reboots) Is it possible that it NEVER looks for any update to a page that is available in the cache?
