I m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
I try to install my Fedora 12 machine from my http server.but i fail to install it on the client side machine give me a error like
unable to retrieve.Here is the step what i did.
1)I copy the entire my rpm of F12 DVD to the /var/www/html/rpm
2) and start the http server (my http server is start without any problem).
3)on the client side machine i booted from f12 dvd after askmethod i select url.
4)and enter the ip address of 192.168.10.2(for client ip address),192.168.10.1(gateway),and 192.168.10.1(nameserver)
5)after that i enter the [URL] this is my http.conf file
<VirtualHost 192.168.10.1>
ServerAdmin root@server.homepc.com
DocumentRoot /var/www/html/
DirectoryIndex index.html
ServerName server.homepc.com
</VirtualHost>
Note => i configure the dns server on 192.168.10.1 machine , and this machine is also a my http server.
192.168.10.1 has a domain name of server.homepc.com
192.168.10.2 has a domain name of client.homepc.com
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
I used to run Fedora linux a long time ago but this is my first time back to linux in a while.
In short I am trying to install Ubuntu Server 10.4 LTS on this machine:
Dell XPS Server
Intel core 2 quad q6600
8 GB DDR2 667 MHZ Ram
500 GB WD Blue Sata Hard Drive
The install CD boots fine, asks me if I want to install Ubuntu Server, I select that option, and the only thing that follows is the blinking cursor and a black screen, nothing else happens.
I am trying to configuring name server on Centos 5(the latest version) but when I am going to install the named server rpm package it shows the dependices failed of lib and bind packages..however I installed these both packages so it shows again the dependices failed of these packages. My yum is working fine because I have tried some other rpm like dilaog, samba and many more.
View 11 Replies View Relatedinstall sshfs in centos 5.5 but i was not able to get the correct package to install.
View 5 Replies View RelatedI am trying to install CentOS on my netbook and I am referring the following documentation: [URL]
However, after completing the steps mentioned in the documentation when I plug in the USB to boot in CentOS it says: Unable to find the kernel load image and then sits at the boot: prompt.
So I just got a new centOS box with PHP 5.1.something but I wanted it on PHP 5.2, initialy running
Code:
yum update php
returned
Code:
php-pecl-memcache-2.2.6-1.el5.x86_64 from installed has depsolving problems
--> Missing Dependency: php-zend-abi = 20050922 is needed by package php-pecl-memcache-2.2.6-1.el5.x86_64 (installed)
[Code].....
I've tried installing mysql-server on Lucid, and I get errors that it cannot set the root password. A screenshot is attached.
I have no idea what to do. I've tried purging configuring and reinstalling. Same problem. I can't find anything in the logs.
I can connect by using ssh with my server. However I am not able to use the following. Which software do I need to install on the server?
ssh X <username>@<IP address>
I completed an install of Ubuntu server 11.04 last night. After the initial reboot I receive a message stating there is no boot disk. Needless to say, this was irritating. I have run Fedora 14 w/Amahi on this computer for several months but, I wanted to try something different. I am running the following:
Intel DG965WH MB
Intel Core 2 6300 @ 1.86Ghz
4gb Ram
3 2T HD's (WDCWD20EARS-00M, ST32000542A5 and, ST2000DL003-9VT1)
Nvidia 9600GT
Creative X-FI
Sony DVD Optical Drive.
I wanted to use server so I can setup an LV during setup, which doesn't appear to be offered with the Desktop version (during setup I mean). So, ANY help would be really awesome. I don't care which version, of the OPSYS, I use as long as it can do the following:
[Code]...
I am not able to install RHEL5 through httpd(apache) server , i checked on the host system , apache server is working fine and i am also able to navigate to my installation dir through browser.
problem:
I want to install RHEl5 from guest OS in Vmware:
1.I inserted cd-rom and change bios setting to cd rom
2."linux askmethod" , then select http protocol.
3. but system never retrive files from installtion dir instead retrive from cd rom used for only booting purpose.
How do I enable SSI (Server Side Includes) in fedora 12 ?
View 6 Replies View RelatedI recently decided to convert my old NAS gox from Gentoo to Unbuntu Server. For reasons that I do not understand I cannot install 10.04 or 11.04 on it. I've downloaded both the i386 and the AMD64 ISO images to the same machine, burned the the image on the same DVDRW drive onto the same CDRW disc but when I try to install on the D945GCLF board, it consistently fails at the same step - Unable to install base system.
The ISO image all indicate a good MD5 sum and I've burned the ISO image at the slowest possible rate. I've even tried moving the image onto a USB drive and installing from it - same error. The D945GCLF has parallel and serial ports disabled; I'm using the SATA drive for the OS and installing from a USB CDROM drive
I'm installing FreePBX for one of the servers at my work. Im having problems and theres error's coming up saying "amportal binary can not be found" has anyone else had an error like this? Because the installation was going through a tunnel before and the router died so I tried it again by having the installation file locallaly on the machine and then the amportal error comes up towards the end of the installation, But I do a locate, and the file is actually there,
View 1 Replies View Relatedi have an problem regarding yum in fedora 14when i used todate or install any package,then i would get a problem but i unable to get it resolved this,theis follwing:::root@localhost amit]# yum update [ANY PACKAGE]Fatal Python error: pycurl: libcurl link-time version is older than compile-time versionAborted (core dumped)
View 2 Replies View RelatedMy laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View RelatedI am trying to start FTp service both from Terminal and Cpanel interface but unable to start. it says cannot start ftpd service. contact administartor
It's Redhat Linux can anybody help me to fix this issue?
I have a linux server.I am not able to ping this server.The message that I am getting when I try to ping this server from my machine is
Pinging 172.26.134.167 with 32 bytes of data:
Reply from 172.26.134.176: Destination host unreachable.
Reply from 172.26.134.176: Destination host unreachable.
[code]...
This is very old topic but despite of trying out all possible solutions available on net and forums, I am not able to setup tftp server on my 2.6.32.11-99.FC12.i686.PAE. Is there something obvious missing out.
/etc/xinet.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer
# protocol. The tftp protocol is often used to boot diskless
# workstations, download configuration files to network-aware printers,
[Code]....
I'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
I am unable to run remote desktop from my fc 13 server, to my laptop. I have read the remote desktop setup and added port 6000 to firewall, added host name of server to xhost (nick@192.168.1.110). Added the line to /etc/gdm/custom.conf like in fedora guide (DisallowTCP=false). But i still get the error
[nick@pc1 ~]$ xclock
No protocol specified
Error: Can't open display: 192.168.1.101:0
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
Everytime i try to install any app on fedora 7 i.e. RPM i get error message that says cannot get to interent, while i have access to internet on fedora ..
View 5 Replies View RelatedI've recently updated my box from Fedora 12 to Fedora 13....today I wanted to install VLC and followed the procedures provided on VideoLAN's website on how to install VLC (See Below):
Use RPM Fusion for F11, F12 and F13 (available for x86, x86_64, ppc and ppc64)
Install rpmfusion-free-release-stable.noarch.rpm for F11, F12 and F13.
$> su -
#> rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm
#> yum install vlc
#> yum install mozilla-vlc (optionnal)
[Code]....
I am trying to install EBS R12 on linux OS. but it gives an error er 50011 due to domain. I am using stand alone system. how can i fix domain name. I have already identified hostname
View 1 Replies View RelatedI want to install Fedora to, I can't click Next. The cd's been checked and there's no problems.
View 10 Replies View RelatedYou are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
Code:
tftp your_pc_ip_address