Fedora :: Using Jack In F12 - Unable To Connect To Server
Nov 27, 2009
I'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
I am trying to use rosegarden, but it says "midi fine, no audio". I found a thread with this same issue and that said to instal jackd and a synth. So I installed qsynth and tried to start jackd. When starting jackd i get this error:
I try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
Im a composer and I loaded up on some excellent applications for music creation and notation- so excited.. I start with Rosegarden. Failed to connect to JACK audio server. Try my other applications, same problem. Basically the JACK audio server just WILL NOT RUN (correctly). I can sudo it and press start, but still it wont "play with" the applications! Heres the error message from JACK (I also get related errors when I try to do ANYTHING involving music creation):
error JACK Audio Connection Kit -overall operation failed -unable to connect to server Here is the "fatal error" from MusE "Failed to Find Jack Audio Server" This is the JACK output:
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT -Overall operation failed -Unable to connect to server
I installed ardour on my F11 box, and both jack1 (0.xx, in /usr/bin) and jack2( 1.9.5, in /usr/local/bin/). Now when I try to start ardour, it balks about being unable to start jack. On the ardour settings page, I tried changing the JACK server path field from /usr/local/bin to /usr/bin, to no avail.
On the cmdline, here's what I get when I run, manually jack1 and jack2: JACK1: [root@localhost yati]# /usr/bin/jackd jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with absolutely No Warranty This is free software, and you are welcome to redistribute it under certain conditions; see the file copying for details .....
That prompts me to think that JACK1 is fine... but still ardour won't start up.
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I run my own mail server. There's only one part that isn't working and I can't seem to figure out why: sending mail from a client - in this case, Thunderbird.
I can send mail off-server just fine if I log in via telnet. I can receive email just fine with Thunderbird.
I'm having a real problem with intermittent ssh disconnections?It's the same thing regardless if it's over ethernet or wireless, and nfs shares don't have any problems at all.
I'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
I install one server in my system(linux 5.0) and accessing that server through the 127.0.0.1 private ip address(lo). While i connect to a remote server for validating registry it gives me the error and unable to connect to remote server. here some of the files i give here in below to know my system network configuration
On my local machine connected to internet via LAN, I have installed vnc viewer using: yum install vnc When I connect to the vnc server using vncviewer ipaddressofvncserver:1 it shows unable to connect to host. No route to host (113)
I installed dovecot on my server and now the imap and pop3 ports are open.But when I want to telnet it, it's not possible.Code: Trying 127.0.0.1...telnet: Unable to connect to remote host: Connection timed out.Also I can't any ports else. But I can connect to it from other computers. I tried to connect to this from my PC and it was successful.
I have a Ubuntu server (10.10) setup with apache and is being port NAT'ted via firewall from outside to the webserver.I am able to access the webserver from inside LAN but not from outside. NATs are working fine because I can see the traffic come through on tcpdump but the webserver will not respond to the request from outside ip address.Here are the tcpdumps.
I'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
Unable to run programs as su - (root) from command line. example: kfind or yast2error:cannot connect to X ServerAfter I exit as root, I am able to excute both commands successfully.I will not work as su -. Operating System: SLES 9 (using KDE).
When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
I have a strange problem where I can connect to any site except for [URL]... with the latest Firefox and Google chrome both can connect to [URL]... Using Ubuntu 10 not 7.10 FireFox: Unable to connect Firefox can't establish a connection to the server at [URL]...
* The site could be temporarily unavailable or too busy. Try again in a few moments. * If you are unable to load any pages, check your computer's network connection. * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Google Chrome: This webpage is not available. The webpage at [URL].. might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 2 (net::ERR_FAILED): Unknown error. Really Strange is that every other site is fine?
