I have a linux server.I am not able to ping this server.The message that I am getting when I try to ping this server from my machine is
Pinging 172.26.134.167 with 32 bytes of data:
Reply from 172.26.134.176: Destination host unreachable.
Reply from 172.26.134.176: Destination host unreachable.
[code]...
I'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
View 1 Replies View RelatedI have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I am able to traceroute but unable to ping a external mail server ? What could be the reason ?
View 3 Replies View RelatedI have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies View RelatedTried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies View Relatedunable to ping ip address through client machine to linux server. what should i do. Can changes to be done in linux just i have configured NIC and alloted an IP address to that.
View 1 Replies View Relatedi have two linux machines(machine1(rhel client) and machine2(rhel server)) i am able to login the machine2 from machine1 but i am unable to ping machine1 from machine2 fire wall is stoped in both machine
View 1 Replies View RelatedThe NetworkManager applet on my desktop states that my router is 192.168.2.1 and that my first DNS server is 192.168.2.1, but I cannot ping any hosts on my network using by name. All my other computers are windows so the naming is netbios naming, but I don't know if that makes any difference to DNS. I take it that because the other computers are windows that I need a wins client or something on my Fedora laptop. I would rather not fill out my hosts file because the IP addresses of the windows boxes may change.
View 2 Replies View Relatedi have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
View 13 Replies View RelatedI have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies View RelatedI m not able to ping nor able to restart the services.....i dont know wht happened.its giving the error.........
Error,some other host already uses address.im having 3 ethernet cards...this is my main server of company.
I did a new install of Fedora 14. This is my first time using Linux seriously and I am trying to figure it all out.
I am able to ping my hostname of sinbad only from the linux system itself. On all my windows boxes, I am not able to ping it. I can only ping the IP address.
Here is /etc/hosts:
Quote:
I disabled the firewall, disabled SELinux, and still not able to ping it.
Here is the info from ifcfg-eth0 :
Quote:
Quote:
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies View RelatedSo, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I recently built my second general-purpose server, and recently installed fedora core 10 on it. The first thing I attempted to set up after installation was the network - and that's where it's gone wrong When editing a network device using the graphical system-config-network utility, I find that the subnet mask is being automatically changed to match the default gateway address every time I attempt to modify any of its settings (or sometimes even when I cancel the changes). This also means that I cannot set the subnet mask, as it simply won't accept my setting for it. I seem to be able to get around this glitch by setting the subnet mask using the shell version of the same utility, but that doesn't solve my network issue.
Even when I use the shell utility to fix the subnet mask, I'm unable to ping other computers or routers on the network even when ifconfig indicates that the desired ip address has been taken, and other computers on the network are also unable to see the server. I'm using a wired connection and a static IP address on a network with no DHCP.
I have a small Dell PowerEdge 1650 server with Fedora 12 loaded. We can access the internet, (Google, our home page, Etc.) but can not ping any local or outside IP addressed. Our internal computers can ping each other but not the server. No, it is not the server firewall because we also disabled it and still the same results.
View 9 Replies View RelatedI have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I have installed redhat 9 on my pc i want to configure samba i connect these two pc with cross cable i given both c class ip add when i going to ping from linux pc getting ping but xp getting ping
View 3 Replies View RelatedMy Internet Router is on 64.1.1.1
I have 2 NICs in my Linux Box: (Firewall OFF)
Eth0 -> 64.1.1.2 and cross-cable connected to Internet Router (64.1.1.1)
Eth1 -> 192.168.1.1 Connected to switch hub
Default gateway of Eth0 is to Internet Router (64.1.1.1)
From Linux-Box.. I able to ping to internet(ie. ping 202.158.3.7)
Client PC: (Firewall OFF)
Default Gateway is 192.168.1.1
I am unable to ping to internet (ie. ping 202.158.3.7)
I have am having some network troubles. I can't access my samba share. Trying to resolve this I realized I couldn't ping from ubuntu to windows. (default ubuntu.jaunty.server.x64)
Windows IP..192.168.002.021
Ubuntu IP...192.168.002.020
Laptop IP...192.168.002.031
Router IP...192.168.002.001
[Code]....
I have ubuntu 10.4 running on both my desktop and laptop. Both machines are connected to the router in wireless mode with Wifi.I can access internet from both machines without any issues, however I cant ping one machine from another. (and vice versa)
View 4 Replies View RelatedIn my office i have a network of 172.16.31.0 and a squid proxy server running, all other systems have windows XP and one system has centos. On centos system i have three lan cards and i want to test some things on it. So i assigned another IP on it of range 192.168.7.0/24 and same range on another windows system. And all the systems connected through a same network switch.
Unable to ping between Centos and Windows system. If i ping from one centos to windows system with the series of 172.16.31.0 then it replies very well but same thing is not happening in other 192.168.7.0/24 IP series.
My Eth0 has 3 virtual Ethernet (eth0:1, eth0:2, eth0:3)
Eth0 -> 202.1.1.1
Eth0:1 -> 202.1.1.2
Eth0:2 -> 202.1.1.3
Eth0:3 -> 202.1.1.4
I am unable to ping them (202.1.1.2 - 202.1.1.4) from Client's PC.
I am using slackware 13.0 on my HP 520 machine. I got a problem with wireless connection.I use #iwconfig wlan0 essid Rendezvous key s:09876 mode Ad-Hoc. to connect to the Rendezvous network,but i am not able to ping other machines on the same network. Firewall have no prob. I am using iwl 3945 module.
View 9 Replies View RelatedHost - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedI have set up UEC on a single machine 64 bit blade. I have followed the steps as per the documentation.I am using Managed NOVlan mode. I have installed the Karmic kola image. When I try to run the instance, I get an error "no resources available. Try --addressing private". When I try addressing private, an ip address 172.19.1.2 is assigned and the instance was running.
a) When trying to ping the ip, error displayed that the host is unreachableb) I am also unable to connect to ubuntu@172.19.1.2 using ssh. Error message is displayed that " No route to host".I have searched the forums but couldnt find any solutionPS: I suppose everyone is very busy. I see very limited responses to posts. Sharing your experience and expertise will be helpful for all and will reiterate the meaning of ubuntu
I have a windows 7 desktop hardwired to my wireless router and a windows xp laptop connecting wirelessly on the same network. I am able to ping the windows 7 box by its ip address but unable to do so by its hostname. This is very inconvenient since I would like to set up a share by hostname (doesnt change) and not by ip (changes occasionally since its dhcp).
View 8 Replies View Related