OpenSUSE :: Make VMplayer Work On 11.4?
Mar 10, 2011
Today I installed OpenSUSE11.4 an tried to install VMware Player but after starting player is wanted to compile and I got the messages below:
Mar 10 22:47:18.350: app-139681465902848| Log for VMware Workstation pid=12510 version=7.1.3 build=build-324285 option=Release
Mar 10 22:47:18.350: app-139681465902848| The process is 64-bit.
Mar 10 22:47:18.350: app-139681465902848| Host codepage=UTF-8 encoding=UTF-8
Mar 10 22:47:18.350: app-139681465902848| Logging to /tmp/vmware-root/setup-12510.log
[code]......
View 9 Replies
ADVERTISEMENT
Jul 31, 2011
How does one remove VMPlayer ? The uninstall option does not work.
View 6 Replies
View Related
Apr 16, 2011
I already installed the skype from the official web. After done installing it, i tried to open it. But nothing happen. I'm new using opensuse.
View 7 Replies
View Related
Apr 13, 2010
I did my research and understand that RandR is replacing Xinerama and Sax2, it's a good thing in my opinion but it's not there yet -- at least not for my setupI fully admit, this is not a simple usage. Anyway, I have 4 monitors setup in an inverted "T" arrangement (think 3 in a row at eye level and one above the center monitor) on two NVIDIA 6800 GT cards.Out of the box the detection software gets my monitor details right for one of the monitors on the card it detects but not the other. So, I get 1680x1050 on one monitor and something silly like 800x600 on the other (does anyone have less capability than 1024x768 anymore? I think less than that as a default on anything other than a mobile device (like a smart phone) is pointless conservatism but I digress from the issue.)
My other NVIDIA card doesn't show at all so I am stuck with one good monitor setup, one bad, and 2 non-existent.Then I ran Sax2 and got some mode info. that I had to figure out myself in OSE 11.0 so that was nice (still didn't detect my full setup but it never did so that's fine). Next I took my xorg.conf file from my 11.0 installation and put it in the /etc/X11 directory of my new 11.2 installation (incorporating the updated mode info. for my monitor).I then installed the NVIDIA native drivers and it looked like everything was working as before.Except, after a while I noticed this error: "Xlib: extension "RANDR" missing on display ":0.0"." Coming up after various actions which prompted me to learn about RandR. Running "xrandr --version" I get this result:
xrandr program version 1.3.2
Xlib: extension "RANDR" missing on display ":0.0".
RandR extension missing
[code]....
View 9 Replies
View Related
Sep 13, 2010
I've tried to install a package (cifs-mount) and I didn't realized that my kernel was downgrading. I use OpenSuse 11.3 (kernel 2.6.34 if I remember) and installing package for mounting cifs (mout.cifs, umount.cifs), now my kerenl is 2.6.31. The video card is Nvidia and now doesn't work. Only can access console. How can I restore kernel 2.6.34 and make my X work?
View 1 Replies
View Related
Nov 30, 2010
I'm using Gnome 2.28.2 on OpenSuse 11.2 and Gnome 2.24.1 on OpenSuse 11.1.The application "Software Log Viewer" has never worked, Whether initially opening or refresh it is always blank, but it should show installed software.
View 4 Replies
View Related
Jul 8, 2011
I was trying to make the mic to work on openSUSE 11.3 x64 (it's a headset's mic). At the beginning I thought it was just a mater of plugging the mic on, as it's the earphones'case, but didn't work. Then I found this link: Skype, KDE4, OpenSUSE 11.3 and PulseAudio Doesn't sound bad, but I also use Wine and Pulseaudio is said to be not compatible with it.
So, if Pulseaudio is enabled with setup-pulseaudio --enable, how do I disable it should I find problems with Wine? Is Pulseaudio really needed to make the mic to work, or it depends on what I want to use it for?
View 9 Replies
View Related
Aug 24, 2010
I have an Acer Aspire 3003LMi and BCM4318 card and installed opensuse 11.3 on the laptop.Please if someone does or knows how to make wifi work.
View 9 Replies
View Related
Jan 15, 2010
How can I make Genius MousePen 8x6 to work correctly in opensuse 11.2
I have installed wizardpen driver by this:
and made edit in xorg.conf by this:
But the tablet doesn't work!.
View 3 Replies
View Related
Jun 1, 2010
I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?
View 9 Replies
View Related
Mar 26, 2011
I have a 3G modem Huawei e173s-6, the usb id is 12d1:1c0b. It's only detected as storage, not as modem. According to some tutorials I've found, I had to use usb_modeswitch and udev rules to make it automatically switch to modem mode, and usb id 12d1:1c05. I followed the tutorials, and the usb changes the id, but after the switch it is still recognized only as storage.
I have the suspicion that I have to add the driver to the kernel, since this is 11.3, but I haven't the slightest clue what to do. Does someone have experience making this modem work in 11.3? tutorial: USB_ModeSwitch ~ View topic - Huawei E173s working config
View 4 Replies
View Related
Nov 22, 2010
I have a Dell laptop studio 1735 with a integrated webcam. The webcam seems to be recognised without issue:
1) dmesg | grep Webcam
Code:
Product: Laptop_Integrated_Webcam_2M
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13
And in the Hardware Info applet I found the following:
Code:
: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: +rmv.ZLiQYW8YBnE
[code]....
The manifacturer is:
manufacturer = "SONiX Technology Inc."
Do I have to install a special application? Or edit a configuration file in order to make it work?
View 6 Replies
View Related
Jun 12, 2011
How to make win32 codecs (package w32codec-all) work on 64 bit system? Simple install of "w32codec-all" package doesn't help. I tried to compile mplayer from sources. After finishing configure, the script returned that win32 codes will be unavailable because of 64-bit system.I need to view some avi-files coded in Intel Indeo 4. As I understand, this codec exists only in win32 codecs.
View 9 Replies
View Related
Aug 17, 2010
I just purchased a new notebook, namely an HP Pavilion dv6, with a GeForce GT 230M. Also, I have a neat 1920x1200 display with an HDMI connector, which fits nicely with the corresponding outlet on the computer. Now I'd like the external display to be the main display when connected, with the internal display as an expansion to the desktop, and the internal display should, obviously, be primary when on its own.
The reality looks quite different: Not too surprising, with the default drivers I got only a 800x600 resolution, but with the correct drivers installed, I got the full resolution on the integrated display. My external HDMI-display, however, is dead. With the xorg.conf file being obsolete I can't really use the configuration app by nvidia, can I?
View 1 Replies
View Related
Sep 10, 2011
I seldom use my Labtec webcam but used to add the community repository and add gspca driver to make it work.I saw today that this repo only now have libv4l in it , is this enough to replace gspca driver? And if so is there and easy way to install it ? (apart from taking it on it's site : home ) (also i saw that qc-usb can be used for some models
View 5 Replies
View Related
Jan 2, 2009
Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?
It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.
View 3 Replies
View Related
Jun 5, 2011
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies
View Related
Jan 9, 2010
I have installed VMplayer 3.0.0 on a Fedora 12 64 bit system. It seems to have installed ok with no error messages. However when I start the VMplayer it flashes up on the screen and goes again and will not run. has any one had a similar experience and if so what was the fix? I installed the package because i understand it will run Windows 98SE ok. O need it to run two pieces of Windows software. All I need is networking and access to a floppy drive once so I do not need sound and all the other bells and whistles.
View 4 Replies
View Related
Feb 11, 2010
I installed vmplayer, run the bundle script, couldn't see what got installed where, just as in Windows so it seemed. There is no uninstall script I started vmplayer and got a list of messages.
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines/libxfce.so) initialization check failed: Gtk+ version too old (micro mismatch)
(ten times)
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines
[code]....
Some modules are missing in the generic kernel.As well as a 'VMware module kernel updater' screen saying that the Kernel headers for version 2.6.29.5-smp were not found. They are clearly present..
View 4 Replies
View Related
Jul 12, 2009
I'm running Fedora 10 as host to vmplayer guests (win98se, Ubuntu 9.04). Each can connect to the Samba server and give me access to my home directory and 'backup' partition. Samba and nfs are both running. So far so good.
I've just installed Fedora 11 as a vmplayer guest. When I click Places > Network Nautilus opens up showing only Windows Network. Double-click on this item and I get a pop-up message: "Unable to mount location. Failed to retrieve share list from server." SELinux is disabled for the moment. I tried to mount the 'backup' partition: mount -t ext3 catinthehat2:/archive /mnt/archive but get the message: mount: special device catinthehat2:/archive does not exist.
View 4 Replies
View Related
Feb 17, 2010
how to access local drives in vmplayer
View 1 Replies
View Related
Jan 24, 2011
Recently i installed VMPlayer-3.1.3 Linux version in RHEL-5.4 installation is done,but vmware-config.pl file is missing so that i cannot customise the network settings.
My host machine(RHEL-5.4),consists 2 nic card and each having 192.168.x.x,172.20.x.x ip address.In My guest machine i configured 2 virtual nic.I want to customise these nic.
Also i want to bridge the host machines eth0 to vmnet0 and eth1 to vmnet2.so that i can customise the virtual nic's.
I did these settings in windows and it is working,but this is the first time i am installing vmplayer in linux.
View 1 Replies
View Related
Jan 31, 2011
I recently wanned to use my vmplayer installation and I got the following error : /usr/lib/vmware/bin/vmplayer: symbol lookup error: /usr/lib/vmware/lib/libvmwareui.so.0/libvmwareui.so.0: undefined symbol: vmodl_vmomi_key_any_value_get_type
I try to reinstall vmplayer. It didn't help.
View 2 Replies
View Related
Mar 30, 2011
What is a good distro with vmplayer installed by default.
View 2 Replies
View Related
May 8, 2010
i am using vmplayer 3.0 for linux. and i want to insert module on ubuntu 9.4 which is running on vmplayer. how can i insert new module on vmplayer.
View 1 Replies
View Related
Jul 29, 2011
The vmplayer for linux couldn't be installed successfully on rhel5.x version.Anyone has encountered this kind of problem?
View 2 Replies
View Related
Mar 30, 2010
I've tried to run a Clonezilla VM using vmplayer. All works fine except when I get to the cloning section. I have three partitions on the HD; partition A, B and C.
A = Partition to clone
B = Partiton onto which the clone image of PartA is to be saved
C = OS partition which is running the Clonezilla VM.
I would like to save the partition as an image but when it actually comes to the nitty gritty of partition cloning Clonezilla does not recognise PartA or PartB. I get error massages along the lines of "No unmounted partitions found." When I drop into a shell prompt the fdisk -l output shows nothing. However, running from the liveCD it recognises both these along with PartC. Is there a way of carrying out the cloning using this method by tweaking vmplayer settings or is the project just not possible ?
View 5 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Aug 10, 2011
Accidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
