Fedora Networking :: 11 As Vmplayer Guest Can't See Network
Jul 12, 2009
I'm running Fedora 10 as host to vmplayer guests (win98se, Ubuntu 9.04). Each can connect to the Samba server and give me access to my home directory and 'backup' partition. Samba and nfs are both running. So far so good.
I've just installed Fedora 11 as a vmplayer guest. When I click Places > Network Nautilus opens up showing only Windows Network. Double-click on this item and I get a pop-up message: "Unable to mount location. Failed to retrieve share list from server." SELinux is disabled for the moment. I tried to mount the 'backup' partition: mount -t ext3 catinthehat2:/archive /mnt/archive but get the message: mount: special device catinthehat2:/archive does not exist.
View 4 Replies
ADVERTISEMENT
Feb 3, 2009
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies
View Related
Mar 16, 2009
I have a local file server running Samba on Fedora 9. It's already configured and serves a few people without any problems. I am now trying to set up a new read-only share with the username 'guest' and the password 'guest'. However, with no success so far! If I log on as 'guest' with the password 'guest' like so:
Code:
su - guest
No problem. Once logged in, if I try:
Code:
smbclient //samba/share
I'm prompted for a password. If I enter 'guest' I get:
Code:
session setup failed: NT_STATUS_LOGON_FAILURE
If I enter nothing (null) I get:
Code:
Anonymous login successful
Domain=[RIVER] OS=[Unix] Server=[Samba 3.2.8-0.26.fc9]
tree connect failed: NT_STATUS_LOGON_FAILURE
View 8 Replies
View Related
Feb 16, 2010
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
View 1 Replies
View Related
Mar 5, 2009
I have rhel5 as host and guest is xp and rhel5, how will I make a network between them.
View 3 Replies
View Related
Apr 9, 2010
I am not able to connect to the internet via Ubuntu guest in Vmware Workstation. Here is the ipconfig:
Here is the ifconfig -a:
I have the vmware os settings to connect through a nat connection and I am able to ping domains however I am unable to open a page in either firefox or chrome.
View 1 Replies
View Related
Feb 13, 2010
I currently have VirtualBox installed on my Ubuntu 9.10 Desktop. I have windows xp as a guest os and it has network shares on it. My question is, is there a way for another computer to access those network drives on the guest os in virtualbox? I don't want to search for hours on end on google, a simple no would be fine - however if it is possible let me know because when I am in windows on another computer that has windows as a host os it sees it in the windows network folder but it says "....network location not found" or something similar but it still shows a pc picture of the virtual os of the virtual box program running in ubuntu.
View 1 Replies
View Related
Jan 9, 2010
I have installed VMplayer 3.0.0 on a Fedora 12 64 bit system. It seems to have installed ok with no error messages. However when I start the VMplayer it flashes up on the screen and goes again and will not run. has any one had a similar experience and if so what was the fix? I installed the package because i understand it will run Windows 98SE ok. O need it to run two pieces of Windows software. All I need is networking and access to a floppy drive once so I do not need sound and all the other bells and whistles.
View 4 Replies
View Related
Jan 23, 2011
finding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
View 4 Replies
View Related
Mar 9, 2011
I have an Aspire 7741z running Ubuntu 10.04 I just loaded the 32 bit version today, then did the Update manager (398 updates) Before the update everything worked fine. After the update, no wireless. Password & security is correct, all wireless setup is correct. Aside from my network, I do have access to a local hotel (next door) and I can always get into their unsecured guest network, that doesn't work either.
I believe it is the driver since I have loaded Ubintu 10.10 32 bit with the same reaction. It will connect when I put in the live disk, but not from the hard install. output from lspci
[Code]...
View 1 Replies
View Related
Apr 3, 2011
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies
View Related
Jun 3, 2010
I had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).
View 5 Replies
View Related
Oct 21, 2009
My machine is HP Pavilion DV5. I am running Vista Home Premium as host and installed Fedora 10 as guest using Vmware Workstation 6.5.3 B185404. I am using wireless connection for Vista and use NAT for Fedora (as default). I cannot connect to the internet in Fedora. Is it because of the issue of driver for the wireless card in Fedora, not sure, coz Fedora just uses connection through the host right? I need to download packages and use for my program.
View 11 Replies
View Related
Jun 3, 2011
I've installed fedora 15 on virtualbox as my guest OS.I've configured bridged networking and I've set my router to assign an IP to it.when it boots up,I have 2 devices shown via "ifconfig" which is "lo" and "p2p1" and none has the ip assigned to it.I'm unable to access the Internet. How can I configure it to do so?I've tried following this tutorial: [URL] but the file "ifcfg-ethX" doesn't exist...it only has ifcfg-lo..... I've installed fedora 15 spin edition which doesn't have a GUI for me to edit network settings...
View 13 Replies
View Related
Oct 3, 2010
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
View 12 Replies
View Related
Mar 14, 2010
i am doing a project in which i have to use xen to create virtualised environment.I have already done this.
now i am using the following setup
host os :- opensuse 11.1with ip 192.168.9.19 and with aliasing ip 192.16.9.14
guest os1:- opensuse 11.1 with ip 192.168.9.107
guest os2:- opensuse 11.1 with ip 192.16.9.13
[code]....
View 2 Replies
View Related
Jun 28, 2009
I setup Xen guest at my home computer following this tutorial: [URL] In vm, network does not work. I tried with type=ioemu but no success and then I get messages like this
kernel:[10703.223592] unregister_netdevice: waiting for vif3.0 to become free. Usage count = 3
Host is 192.168.0.2 and network is working properly on it. Guest is 192.168.1.11, gateway 192.168.1.1. I tried to change guest to 192.168.0.11, gateway 192.168.0.2, then 192.168.0.1 with no success.
Here are some information:
Code:
main:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:44:4c:11:a0:a5
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::2a6:f0ff:fe77:3d98/64 Scope:Link
[code]....
View 4 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Jul 31, 2011
How does one remove VMPlayer ? The uninstall option does not work.
View 6 Replies
View Related
Feb 11, 2010
I installed vmplayer, run the bundle script, couldn't see what got installed where, just as in Windows so it seemed. There is no uninstall script I started vmplayer and got a list of messages.
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines/libxfce.so) initialization check failed: Gtk+ version too old (micro mismatch)
(ten times)
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines
[code]....
Some modules are missing in the generic kernel.As well as a 'VMware module kernel updater' screen saying that the Kernel headers for version 2.6.29.5-smp were not found. They are clearly present..
View 4 Replies
View Related
Mar 15, 2010
Step 1 : In Hyper-v Machine i have created two Virtual Ports.
Step 2 : Now for these two diff ports two ip address with different subnet mask(e.g 192.168.9.19 and 192.16.9.20)have been assigned(and have checked using ifconfig).
Step 3 : In Host machine i have added one subnetmask for one machine next one for another machine,however i m not able to ping both the ports from either of the machines having static ip 192.168.9.13 or having ip 192.16.9.107.
Step 4 : If i add same subnet mask for both machine it is pinging properly between 2 machines.
View 4 Replies
View Related
Jul 15, 2010
i'm trying to setup a permanent CIFS share from my nas, but it keeps prompting for a password dispite GUEST access set on the share.FStab is as follows:
Code:
//192.168.0.253/media/ /mnt/nas1_media/ cifs guest,_netdev 0 0
if i do
[code]....
View 5 Replies
View Related
May 30, 2011
Computer 1
Motherboard 845GBV
Host OS Windows XP
Guest OS Linux slackware (via Virtual Box)
Network via USB modem
USB port 3/6
Computer 2
Motherboard Asus P7P55D-E Pro
OS Windows 7 x64
Network via USB modem, or
on-board network chip
USB port Plenty!!
1) Motherboard on computer 1 is possessed of 6 USB ports
2) USB modem (connecting to the internet) is plugged into one of the USB ports
3) Guest OS uses NAT to access the USB modem
4) I wish to start setting up a network where the Slackware guest OS on computer 1 is the gateway/firewall for computer 2
How should the Guest OS be told to use one of the USB ports (I only use 3 of them at present) as a Network Card?
View 2 Replies
View Related
May 11, 2010
I'm trying to install the Guest Additions for a VM running a guest Lucid Lynx Server. The problem I'm encountering is this: The vboxadd-install.log for vbox says it "couldn't find the sources of your current Linux kernel" and to "Specify KERN_DIR=<directory> and run Make again."
View 4 Replies
View Related
Mar 10, 2011
Today I installed OpenSUSE11.4 an tried to install VMware Player but after starting player is wanted to compile and I got the messages below:
Mar 10 22:47:18.350: app-139681465902848| Log for VMware Workstation pid=12510 version=7.1.3 build=build-324285 option=Release
Mar 10 22:47:18.350: app-139681465902848| The process is 64-bit.
Mar 10 22:47:18.350: app-139681465902848| Host codepage=UTF-8 encoding=UTF-8
Mar 10 22:47:18.350: app-139681465902848| Logging to /tmp/vmware-root/setup-12510.log
[code]......
View 9 Replies
View Related
Mar 4, 2010
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
View 1 Replies
View Related
Feb 17, 2010
how to access local drives in vmplayer
View 1 Replies
View Related
Jan 24, 2011
Recently i installed VMPlayer-3.1.3 Linux version in RHEL-5.4 installation is done,but vmware-config.pl file is missing so that i cannot customise the network settings.
My host machine(RHEL-5.4),consists 2 nic card and each having 192.168.x.x,172.20.x.x ip address.In My guest machine i configured 2 virtual nic.I want to customise these nic.
Also i want to bridge the host machines eth0 to vmnet0 and eth1 to vmnet2.so that i can customise the virtual nic's.
I did these settings in windows and it is working,but this is the first time i am installing vmplayer in linux.
View 1 Replies
View Related
Dec 3, 2010
I'm a Windows person and will soon be tasked with UNIX/LINUX projects. I'm trying to learn as much as possible in a very short period of time. I'm very familiar with VMPlayer and VirtualBox. Recently I installed OpenSUSE 11.3 as a guest OS on VMPlayer (bridged network). The host is WinXP. I have also enabled shared folder to the host @ CRepositoryInstalls. Question - How do I access the shared folder from OpenSUSE (the guest OS) and vice-versa?
View 2 Replies
View Related
May 24, 2010
i've installed kubuntu 10.04 on a sun virtualbox , and when i tried to install the guest additions i got this error in the terminal:
Building the VirtualBox Guest Additions kernel modules. fail ! (Your system does not seem to be set up to build kernel modules. Look at /var/log/vboxadd-install.log to find out what went wrong) i'am running windows 7 as a host operating system .
View 1 Replies
View Related
