OpenSUSE :: How To Make The Skype Work On 11.4

Apr 16, 2011

I already installed the skype from the official web. After done installing it, i tried to open it. But nothing happen. I'm new using opensuse.

View 7 Replies


ADVERTISEMENT

Ubuntu :: Bluetooth And Skype \ Make A Call Using These Headphones With Skype, Can Speak For Say 10 Seconds And Then The Headset Disconnects Completely From The System?

Aug 12, 2010

I recently bought a IOgear USB bluetooth adapter and a Sony DRBT101/BLK bluetooth headphones to use with my computer.Whenever I try to make a call using these headphones with skype, I can speak for say 10 seconds and then the headset disconnects completely from the system. I then have to reconnect the headset by switching it off and on. I do not have this problem listening to music using A2DP. It works fine with my mobile phone.When I change the profile to Telephony Duplex (HSP/HFP), it shows up as hands free, I thought it should be headset in blueman manager. My friend uses Plantronics headset with is Dell laptop with built in bluetooth and he says his comes up as headset not hands free. Could this be causing the problem?

View 1 Replies View Related

OpenSUSE :: Skype Doesn't Work In 11.3?

Dec 15, 2010

Skype does not work in Suse 11.3. When i start in an terminal, i'm getting this error:

skype: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory

I looked for that library but didn't find it in the repositories.

PS. Running Smeegol on Samsung N150

View 9 Replies View Related

OpenSUSE :: Can Empathy Work With Skype

Dec 23, 2010

I've been using Pidgin up until recently but I don't really like it. I came across Empathy and really like it but I was wondering if there is any way to use Skype through Empathy. If so can I only chat or can I use Empathy for callsvideo calls?

View 3 Replies View Related

OpenSUSE Network :: 11.4 Ath USB WLAN Does Not Work Except Skype?

Jul 6, 2011

Being in China has some disadvantages reagardings internet.To enjoy unfiltered speed and access I use my non mainland mobile phone card.

Using LAN works fine in the office.But if I connect the WLAN USB dongle except skype nothing works.

ifconfig
eth1 Link encap:Ethernet Hardware Adresse 00:1A:A05:26:C5
inet Adresse:192.168.1.3 Bcast:192.168.1.255 Maske:255.255.255.0
inet6 Adresse: fe80::21a:a0ff:fed5:26c5/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
code....

View 5 Replies View Related

OpenSUSE :: Skype Installation Doesn't Work, Needs LibQtGui.so.4?

Feb 1, 2011

I've installed the OpenSuse version of Skype, downloaded from the Skype website. When I try to run it, I get this:

Code:
skype: error while loading shared libraries: libQtGui.so.4:
cannot open shared object file: No such file or directory

[code]...

View 6 Replies View Related

OpenSUSE Multimedia :: Microphone Doesn't Work In Skype

Mar 4, 2010

I have a motherboard p5bvm-se with 82801H (ICH8 Family) HD Audio Controller. The sound in earphones playing. Sound from the microphone is recorded and reproduced in KRecord => microphone is working. ssv:~ # uname -a Linux sslesarev 2.6.31.12-0.1-default #1 SMP 2010-01-27 08:20:11 +0100 x86_64 x86_64 x86_64 GNU/Linux

[code]...

I installed skype skype-2.1.0.81-3.1-x86-64 from build.opensuse.org/home:matteotomasoni or skype-2.1.0.81-suse.i586.rpm from [URL]... Microphone does not work in skype!

View 9 Replies View Related

Fedora X86/64bit :: Get Skype To Work On Skype On X_86 64 Bit 14

Jan 11, 2011

get Skype to work on 64 bit have downloaded and installed the 32 bit which installed fine but just wont load

View 2 Replies View Related

OpenSUSE :: Skype Doesnt Work - Error While Loading Shared Libraries

Sep 28, 2010

Code:

skype: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory.

View 6 Replies View Related

OpenSUSE :: Using Skype - Whole System Stuck With No Response - Mouse Stop Moving - Keyboard Does Not Work

Nov 30, 2010

I use skype, and several times when i have it open, more often when i am using it, the hole system stuck with no response. The mouse stop moving, the keyboard does not work, even control + alt + backspace does not work! The only available choice is to reboot the computer.

View 3 Replies View Related

Fedora :: Getting Skype To Work On 14 - No "yum Install Skype---" Command

Dec 15, 2010

I have downloaded & installed the skype beta release for linux (now ancient?) on my newly build fedora 14 (64) box.

Under fedora 12, I made this work after several hours of mucking around by installing old libraries for 32 bit code in /lib and /usr/lib - as I got an error, I found the library and put it in place. This was painful and the WRONG way to do things - I should have been using yum!

It remains a shame that the Skype release for Linux is so old, but that is life.

Can anyone list the libraries needed (prefer yum names if possible) to make this work?

I can do this again the hard way and list the results for others (should have saved for myself, but I never dreamed that a newer Skype release would take so long) , but I am sure many folks have this working already. I am surprised there is no "yum install skype---" command.

View 14 Replies View Related

Ubuntu Multimedia :: Skype - Pulseaudio - Sound Output Or Input Does Not Work At All Doesn't Work

Sep 11, 2010

When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:

[Code]...

View 3 Replies View Related

OpenSUSE Hardware :: None Of Notification Sounds Work / Skype, Firefox, And Wine Still Give Sounds?

Feb 24, 2010

I've been using opensuse for about a week.(although I'm not completely a linux noob) I've been slowly moving more of the stuff I do on windows over to suse. I thought my sound was working fine until I decided to get mp3s running on amarok. I followed a bunch of guides which didn't work. While I was messing around with stuff I noticed a startup noise. I just assumed it didn't have a startup noise. At some point I broke all of my sound except running wine, so I reinstalled.

Now that I've noticed, none of my notification sounds work. Stuff like skype, firefox, and wine still give me sounds.

(If anyone could point me in the direction of a good place to get mp3s working on amarok would be nice as well.)

View 9 Replies View Related

OpenSUSE Network :: 11.3 - No Network Connectivity - Audio To Work On Skype

Oct 16, 2010

I had Kubuntu 64-bit installed and decided to try OpenSUSE instead as I was having problems getting the audio to work on Skype. After installing OpenSUSE 11.3 (64-bit), I do not have network connectivity (Ethernet or Wireless)? Neither adapter can be detected? I thought the install would be fairly straightforward as Kubuntu 64-bit detected all the hardware.

View 6 Replies View Related

OpenSUSE :: Make VMplayer Work On 11.4?

Mar 10, 2011

Today I installed OpenSUSE11.4 an tried to install VMware Player but after starting player is wanted to compile and I got the messages below:

Mar 10 22:47:18.350: app-139681465902848| Log for VMware Workstation pid=12510 version=7.1.3 build=build-324285 option=Release
Mar 10 22:47:18.350: app-139681465902848| The process is 64-bit.
Mar 10 22:47:18.350: app-139681465902848| Host codepage=UTF-8 encoding=UTF-8
Mar 10 22:47:18.350: app-139681465902848| Logging to /tmp/vmware-root/setup-12510.log

[code]......

View 9 Replies View Related

OpenSUSE :: RandR / Xinerama - How To Make Work In OSE 11.2

Apr 13, 2010

I did my research and understand that RandR is replacing Xinerama and Sax2, it's a good thing in my opinion but it's not there yet -- at least not for my setupI fully admit, this is not a simple usage. Anyway, I have 4 monitors setup in an inverted "T" arrangement (think 3 in a row at eye level and one above the center monitor) on two NVIDIA 6800 GT cards.Out of the box the detection software gets my monitor details right for one of the monitors on the card it detects but not the other. So, I get 1680x1050 on one monitor and something silly like 800x600 on the other (does anyone have less capability than 1024x768 anymore? I think less than that as a default on anything other than a mobile device (like a smart phone) is pointless conservatism but I digress from the issue.)

My other NVIDIA card doesn't show at all so I am stuck with one good monitor setup, one bad, and 2 non-existent.Then I ran Sax2 and got some mode info. that I had to figure out myself in OSE 11.0 so that was nice (still didn't detect my full setup but it never did so that's fine). Next I took my xorg.conf file from my 11.0 installation and put it in the /etc/X11 directory of my new 11.2 installation (incorporating the updated mode info. for my monitor).I then installed the NVIDIA native drivers and it looked like everything was working as before.Except, after a while I noticed this error: "Xlib: extension "RANDR" missing on display ":0.0"." Coming up after various actions which prompted me to learn about RandR. Running "xrandr --version" I get this result:

xrandr program version 1.3.2
Xlib: extension "RANDR" missing on display ":0.0".
RandR extension missing

[code]....

View 9 Replies View Related

OpenSUSE :: Restore Kernel 2.6.34 And Make X Work?

Sep 13, 2010

I've tried to install a package (cifs-mount) and I didn't realized that my kernel was downgrading. I use OpenSuse 11.3 (kernel 2.6.34 if I remember) and installing package for mounting cifs (mout.cifs, umount.cifs), now my kerenl is 2.6.31. The video card is Nvidia and now doesn't work. Only can access console. How can I restore kernel 2.6.34 and make my X work?

View 1 Replies View Related

OpenSUSE :: How To Make Software Log Viewer Work

Nov 30, 2010

I'm using Gnome 2.28.2 on OpenSuse 11.2 and Gnome 2.24.1 on OpenSuse 11.1.The application "Software Log Viewer" has never worked, Whether initially opening or refresh it is always blank, but it should show installed software.

View 4 Replies View Related

OpenSUSE Multimedia :: Make The Mic To Work On 11.3 X64 (it's A Headset's Mic)

Jul 8, 2011

I was trying to make the mic to work on openSUSE 11.3 x64 (it's a headset's mic). At the beginning I thought it was just a mater of plugging the mic on, as it's the earphones'case, but didn't work. Then I found this link: Skype, KDE4, OpenSUSE 11.3 and PulseAudio Doesn't sound bad, but I also use Wine and Pulseaudio is said to be not compatible with it.

So, if Pulseaudio is enabled with setup-pulseaudio --enable, how do I disable it should I find problems with Wine? Is Pulseaudio really needed to make the mic to work, or it depends on what I want to use it for?

View 9 Replies View Related

OpenSUSE Wireless :: How To Make WiFi Work

Aug 24, 2010

I have an Acer Aspire 3003LMi and BCM4318 card and installed opensuse 11.3 on the laptop.Please if someone does or knows how to make wifi work.

View 9 Replies View Related

OpenSUSE Hardware :: Make Genius MousePen 8x6 To Work In 11.2

Jan 15, 2010

How can I make Genius MousePen 8x6 to work correctly in opensuse 11.2

I have installed wizardpen driver by this:

and made edit in xorg.conf by this:

But the tablet doesn't work!.

View 3 Replies View Related

OpenSUSE Network :: Make Apache Mod_rewrite Work?

Jun 1, 2010

I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?

View 9 Replies View Related

OpenSUSE Network :: Make Huawei E173-s Work In 11.3?

Mar 26, 2011

I have a 3G modem Huawei e173s-6, the usb id is 12d1:1c0b. It's only detected as storage, not as modem. According to some tutorials I've found, I had to use usb_modeswitch and udev rules to make it automatically switch to modem mode, and usb id 12d1:1c05. I followed the tutorials, and the usb changes the id, but after the switch it is still recognized only as storage.

I have the suspicion that I have to add the driver to the kernel, since this is 11.3, but I haven't the slightest clue what to do. Does someone have experience making this modem work in 11.3? tutorial: USB_ModeSwitch ~ View topic - Huawei E173s working config

View 4 Replies View Related

OpenSUSE Hardware :: Make To Work An Integrated Webcam In A Laptop?

Nov 22, 2010

I have a Dell laptop studio 1735 with a integrated webcam. The webcam seems to be recognised without issue:

1) dmesg | grep Webcam

Code:

Product: Laptop_Integrated_Webcam_2M
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13

And in the Hardware Info applet I found the following:

Code:

: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: +rmv.ZLiQYW8YBnE

[code]....

The manifacturer is:

manufacturer = "SONiX Technology Inc."

Do I have to install a special application? Or edit a configuration file in order to make it work?

View 6 Replies View Related

OpenSUSE Multimedia :: How To Make Win32 Codecs Work On 64 Bit System

Jun 12, 2011

How to make win32 codecs (package w32codec-all) work on 64 bit system? Simple install of "w32codec-all" package doesn't help. I tried to compile mplayer from sources. After finishing configure, the script returned that win32 codes will be unavailable because of 64-bit system.I need to view some avi-files coded in Intel Indeo 4. As I understand, this codec exists only in win32 codecs.

View 9 Replies View Related

OpenSUSE Hardware :: 11.2 + Nvidia + Hdmi Display -- How To Make It Work

Aug 17, 2010

I just purchased a new notebook, namely an HP Pavilion dv6, with a GeForce GT 230M. Also, I have a neat 1920x1200 display with an HDMI connector, which fits nicely with the corresponding outlet on the computer. Now I'd like the external display to be the main display when connected, with the internal display as an expansion to the desktop, and the internal display should, obviously, be primary when on its own.

The reality looks quite different: Not too surprising, with the default drivers I got only a 800x600 resolution, but with the correct drivers installed, I got the full resolution on the integrated display. My external HDMI-display, however, is dead. With the xorg.conf file being obsolete I can't really use the configuration app by nvidia, can I?

View 1 Replies View Related

OpenSUSE Hardware :: Add The Community Repository And Add Gspca Driver To Make It Work?

Sep 10, 2011

I seldom use my Labtec webcam but used to add the community repository and add gspca driver to make it work.I saw today that this repo only now have libv4l in it , is this enough to replace gspca driver? And if so is there and easy way to install it ? (apart from taking it on it's site : home ) (also i saw that qc-usb can be used for some models

View 5 Replies View Related

OpenSUSE Hardware :: Make Creative HS-1200 Wireless Headset To Work In OS11.1?

Jan 2, 2009

Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?

It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.

View 3 Replies View Related

Novell :: Make Mic Working In Skype On SUSE 11.2

Nov 24, 2009

It is me again. I have succeded and make video and audio working in Skype but I cant make Microphone working at all. Tried some info I found on the web but no way.

View 7 Replies View Related

OpenSUSE Multimedia :: How Do I Make VLC Work - Whenever Load Disc Doesn't Give Option To Play

Jun 5, 2011

I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved