I just finished installing a fresh install of openSuse on my old Compaq Presario V2600 laptop. The problem is, for some reason, it always boots to the terminal instead of starting x and the gnome desktop environment. I have to manually start x every time with the command startx. Then, after x has been started, the display is an unusually low resolution, and it wont let me change it. I tried running sax2 -r -m 0=vesa but this did not help fix the problem.
The second problem I am having is that my integrated wireless on the laptop does not work. It is a Broadcom 802.11 b/g WLAN. Please help with this as well (I know I will probably have to use proprietary drivers just like I did in Ubuntu, but I can't find how to install these drivers under openSuse.) If you need to know more about the specs of my laptop, here you go:
Make/Model: Compaq/Presario V2600 Processor: AMD Mobile Sempron 3100+ Graphics: ATI Radeon Express 200M RAM: 512 MB Operating System(s): Dual Boot between XP Pro and openSuse HDD: 40GB SATA
I've been using slackware64 13.1 ever since it came out on my Dell Inspiron 1525, and I haven't really had any problems with my webcam in that time. However, last time I tried to use skype - I noticed that it couldn't detect it.
In kinfocenter, my webcam is picked up (OmniVision Technologies). The only time I've had a similar problem in the past is when I used the "Compact" option in lilo.conf, and the webcam wouldn't turn on. Just removing the option solved the problem.
Since I don't know what steps caused this to happen, I'm not sure where to start fixing it
I've been trying to get my built-in webcam to work for the past few hours and am completely stuck... Apparently I need a driver called uvcvideo, but I cant find it anywhere (its repos have been removed). I have installed Cheese and Camorama, neither of which work. Camorama throws this error when launched - "Could not connect to video device /dev/video0). Please check connection. Cheese launches, turns camera light on, shows a black screen for ~1 sec then closes.
The only way I can get the webcam to work is with a program called "guvcview" (light turns on and I can see preview), that's why I'm thinking I need the uvcvideo driver.
I've found various posts on how to install the uvcvideo driver, but I get an error on all its reposotory links - "reposotory not found". I also can't figure out how to install the EasyCam program, yet another repository error.
Does anyone know how to get built-in webcams working? I suspect it is due to my lack of driver, but I could be wrong. Lsusb detects the webcam as a Chicony Electronics Co. LTD Gateway USB 2.0 Webcam, so the kernel detects it, just no apps.
I have an Acer Laptop 5739G I believe.It has an Acer Crystal Eye webcam that won't work with Skype or anything.I've tried a few different methods but couldn't get it to work.Really noobtastic with Linux so realllllly basic information works for me.
i have dell inspiron N5010 and i have installed ubuntu on it.i am using ubuntu for the first time and i am having a real hard time as my mic and my webcam which are built in my laptop.how can i make them work.
Today I wanted to make my webcam work in a flash chat. I added myself to the video group and added export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so to my ~/.basrc file Then I loggued in again... and the problem is:
If I open a shell and start firefox from there (as a regular user), webcam will work ok. If I start Firefox from the top bar, it will NOT work. I checked preferences and it does not seem to do anything weird anybody has a clue? It seems weird to have that pretty top toolbar and not be able to use it.
I found drivers for the laptop, both the basic and the webcam. The problem is that image is very dark. On my other OS i don't have this issue. PS: My Laptop is = Asus f5rl
i was just wondering if anyone could help me with my webcam. I'm unsure if it was detected during the instalation and do not know how to turn it on if it was.
I recently rebooted my computer, switching from Vista to Ubuntu 10.10, 32 bit. I've had troubles with my webcam ever since. I've tried every single suggestion from the Ubuntu Forums and nothing works, and I am now quite desperate..
I'm installed Cheese but nothing else than a green dotted screen appears, I've also tried gucview which tells me that my webcam is recognized under the name of USB 2.0 Camera.
When I enter lsusb in the terminal, here is what appears:
natacha@natacha-EasyNote-MX36:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
The webcam doesn't work with any program, but since it does partially work with Cheese, I would think that I either have to install an additional driver or that my camera is not compatible with Ubuntu, which would really suck.
The closest similar case I've found on the net was this one : [URL] . Apparently it's about a Bug 16575 but the problem doesn't seem to have been resolved either.
I bought a Dell Inspiron with pre-installed ubuntu. All has been working for the last year and recently my integrated webcam stopped working. I was trying to use it on skype and it did nothing, although the program recognises I have a webcam, I tried cheese and the power light on my webcam comes on but again the screen does nothing.
I have spent many time searching for my prob but couldn't solve it. i installed ubuntu 9.10 recently. the problem is that my integrated webcam and microphone are not being detected. i tried cheese, camorama webcam viewer and skype.. its like that webcam drivers are not installed. and i couldn't find any drivers. camorama gives the error: could not connect to video device(/dev/video0) cheese also says No camera found!
reading other threads i found that lsusb comand output might help so here is its output.. code...
I want to use my laptop's built in webcam as remote webcam and I don't want to use FTP and post images to a www and use php script or sth, I want to make it accessed remotely as a fast stream and if there is a way I would like to use it with Windows XP - Microsfot Windows Messenger.
i have sony viao vgn-fz11 Can someone please help ,im new user to ubuntu been trying to get webcam working properly at the moment its upside down and does not work in skype at all just get black screen does this look correct? do i have the right driver?i will try and give as much information as i can.
my Logitech webcam C 200 under openSuse 11.2-2.6.31.5 appears as046d:0802, but in Skype I cannot see any image when testing the webcam. The correct audio input cannot be chosen either, it does not even appear in the drop-down box.I've installed the same webcam on a different machine with openSuse 11.2 and it worked out of the box, so I don't think there should be any additional driver required.
I am trying to get a Logitech Webcam (not Quickcam) Pro 9000 to work with my SUSE 11.2 installation (specifically trying to get it to work with Skype 2.1). I am using the KDE environment. I've been reading the many posts and seem to be getting the point that I need to install the UVC driver from the webcam driver repo. However, the link I found to the repo seems to be for SUSE 11.1...?
Anyway, here is what I have done so far:I ran the following commands and got the following output:
localhost:~ # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 046d:0809 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Based on [URL], I'm having I believe the same issue. FC12 x64, Inserting a XD card shows in messages: Apr 22 11:05:21 localhost kernel: tifm_core: SmartMedia/xD card detected in socket 0:0 However nothing beyond that. (no folder opening, nothing mounted). lspci says:
i dont know much about setting up networks at all. i searched through this site and others, but have not yet been successful in finding the information i need.i have a laptop running 11.2, kde 4.4. this laptop is connected to a wireless router. now, i also have a desktop running winXP, without wireless, which i would like to connect to the network. where the desktop is located, i can't connect to the router via ethernet, but i would be able to connect it to the laptop via ethernet.so, is there a way to connect this XP desktop to my op.su. laptop so that it will have net access?if so, could someone please help me, or direct me to the appropriate information source?
I installed openSUSE 11.3 on my Dell studio laptop with Mobility Radeon HD 4500 graphics card and everything worked straight out of the box.
Now.. I am connecting my tv through HDMI cable as second monitor. Basically I just want to play movies on my tv while still having the laptop screen free to work. This also works, I just plugged it in and I had two screens.
My problem is that my tv is the primary monitor so basically my laptop background (and all the buttons that go with it) moves to the tv and my laptop background is just a background. See attached image at the bottom of this post(Laptop on the left and tv on the right).
This is exactly what I want but the other way around. I can't seem to change this in System Settings/Display. Is there a file somewhere I can change this?
ImageBam - Fast, Free Image Hosting and Photo Sharing
Im kind a new to open suse, though I think its a very nice alternative to the ordinary Linux distroes.Recently I tried to make a distro for my laptop in the living room, -the only thing its supposed to do is play music, and be able to connect to the internet from time to time. However, I must have forgotten some packages or something, cause when I booted the engine after installing,-(wich btw went smooth:-)) -I cannot play any music, -getting some fail message. -Now iVE installed all the g-streamer packages and the totem player, what else do I need ???. -Have been looking through the packages, but I dont seem to find any other packages related that i think i shound use...
I've just upgraded to Lucid Lynx on my Asus Eee Netbook, with Notebook Remix installed. I wqs glad to see that Canonical integrated the gwibber client into the desktop environment, as this gives me better opportunities to use my Twitter account properly. Unfortunately, i can't run "Set up broadcast account" when clicking the "letter-applet" icon. When running gwibber from terminal, I get this code...
I have Ubuntu netbook edition 10.04 and i have an eMachines netbook and ive decided to get ubuntu. And i had many problems getting to work, but ultimatly got it to work pretty well. But my wireless will not work! And the driver for it wont install. Heres the error message: SystemError: InstallArchives() Failed
And the wireless driver its installing is a Broadcom STA wireless driver.
I just installed SuSE 11.3 (running KDE) and I cannot get compiz to work on it. This is an old laptop with an SiS 660 integrated graphics card which has installed correclty except for the 3D acceleration. I did my homework and looked around before posting this but all I found was this.
1. 3D acceleration for SiS 660 through swrast stopped working when SuSE 11.1 came out [URL] and apparently there's no easy fix for this today. I went to the card manufacturer website [URL] and found no support for SuSE. I tried the mesa drivers and none seemed compatible.
2. I downloaded the compiz repos anyway and followed the instructions in this tutorial: [URL], but it didn't work. So my questions are (a) HOW DO I GET 3D TO WORK FOR THIS GRAPHICS CARD??? and (b) IS IT POSSIBLE TO GET COMPIZ TO WORK WITHOUT 3D ACCELERATION, AND IF SO HOW? I'm an enthusiastic but inexperienced penguinista, so I hope to find an answer to this issue here.
I have a compaq mini 110-1000 with integrated 3g modem and natty narwhal. I bought a vodafone data sim card, I've configured the network manager but it doesn't work! All solution I found are possible only with the hp connection manager. but I've removed windows!!
This is what I see with "lsusb" Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0461:4d6a Primax Electronics, Ltd Bus 002 Device 004: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass) Bus 002 Device 003: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass) Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 10f1:1a0f Importek Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
So, I jaibroke my iPod touch and have OpenSSH and I can ssh into my iPod, but I cannot ssh back into my Laptop??
I did
Code: $ echo '192.168.*.*' >> /etc/hosts.allow ##I googled and it said to do this $ echo 'sshd: 192.168.*.*' >> /etc/hosts.allow I also uncommented these lines in /etc/ssh/sshd_config:
[Code]....
I am 100% sure I am putting in the right password. I even did that ^ code from my laptop, the one I am ssh'ing into, but it still will not accept my password. I even tried root@ instead of matt@..
