Server :: Missing Of Vmware-config.pl In VMplayer-3.1.3
Jan 24, 2011
Recently i installed VMPlayer-3.1.3 Linux version in RHEL-5.4 installation is done,but vmware-config.pl file is missing so that i cannot customise the network settings.
My host machine(RHEL-5.4),consists 2 nic card and each having 192.168.x.x,172.20.x.x ip address.In My guest machine i configured 2 virtual nic.I want to customise these nic.
Also i want to bridge the host machines eth0 to vmnet0 and eth1 to vmnet2.so that i can customise the virtual nic's.
I did these settings in windows and it is working,but this is the first time i am installing vmplayer in linux.
View 1 Replies
ADVERTISEMENT
May 19, 2010
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
View 1 Replies
View Related
Jan 18, 2010
I've been trying to run the vmware-config.pl, but I'm getting this message
Quote:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? yes
Then I hit enter, and later get this message
Quote:
Unable to build the vmmon module.
I have installed gcc and the kernel-devel tools, and after installing all that I did an update, but still not getting through with the configuration.
View 8 Replies
View Related
Jun 3, 2010
As this seems to be an issue with a hardware driver I am posting it under hardware.
Dell Studio XPS 8000 desktop
i7-860 CPU
8 GB RAM
swap area set to 9 GB
nVIdia GeForce GT220 1 GB
Samsung SymcMaster 932 and Acer X223w displays
Ubuntu 10.04 64 bit, all patches, nVidia-current 195.36.15
VMWare Player (64 bit) 3.1.0 build-261024
The whole nVidia thing has been busting my buttons since I installed 10.04 (actually 9.10 was in some ways worse). Occasional "low graphics mode" at boot and the fact that nvidia-settings makes inexplicable changes to the xorg.conf even when I make no changes to the configuration as shown in the program. After a number of uninstall, reinstall drills and a few kicks in the slats the machine is working reasonably well except as noted above.
However, I have noticed that I often cannot load the nvidia-settings program. If I launch it from the menu, nothing seems to happen. In a terminal I get
Quote:
After doing some research on "Segmentation fault" I find that most of the issues refer to the xorg.conf file. The posts I have seen are also quite old. So I did a little testing.
Immediately after booting the PC I can run nvidia-settings with no problem - from the menu or in a terminal. I can run it repeatedly.
BUT - after I launch a virtual machine in VMWare Player (it does not seem to matter what the guest OS is) I can no longer run nvidia-settings. I get the error as I quoted above. If nvidia-settings is already running when the VM is launched, nvidia-settings continues to function until I exit the program. I can then no longer start nvidia-settings.
The problem only occurs after the VM is launched, not simply by running VMWare Player. Shutting down the VM does not fix the problem. Only a reboot will do the trick.
View 6 Replies
View Related
Feb 16, 2010
I am installing VMware-server-2.0.2-203138.i386 on FC 12
Have an error when executing vmware-config.pl initially. When I try again it has the message:-
start of messages;
The following VMware kernel modules have been found on your system that were not installed by the VMware Installer. Please remove them then run this installer again.
vmmemctl
vmci
vmxnet
vmhgfs
vmblock
I.e. - 'rm /lib/modules/2.6.31.12-174.2.3.fc12.i686/misc/<ModuleName>.{o,ko}'
Execution aborted.
End of message
I tried remove them using modprobe e.g.
modprobe -r -v vmemctl the response was "WARNING: All config files need .conf: /etc/modprobe.d/anaconda, it will be ignored in a future release."
Subsequently I tried vmware-config.pl, but have the same error.
View 5 Replies
View Related
Jul 27, 2011
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
View 5 Replies
View Related
Sep 7, 2009
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
View 1 Replies
View Related
Jul 28, 2010
i have installed Red Hat-VMware Workshop v 6.0.1 successfully. Now i am trying to run virtual machine but i am getting an error that is "File not found: M41804.lck.This file is required to power on this virtual machine."Can any one provide me this file so that i can start redhat linux and do my assignment.
View 5 Replies
View Related
Nov 24, 2010
I installed VMware Player on my Ubuntu 10.10 machine, which uses Macbuntu skin. Loaded Vista on VMware Player so I could sync my ipod... works great. One problem I want to use VMware Player's unity mode but there is no menu to select it. From all of the screen shots I have seen on the web there is suppose to be a menu bar selection at the top next to the ubuntu (apple in my case) symbol to select unity mode through... but it is no where to be found. Here is a screen shot with VMware loaded with Vista, VMware is the active window:
View 2 Replies
View Related
Apr 21, 2011
I have just updated my 7.10 release to the final release patches/kernel for it (as a step in the process of upgrading the installation to 10.10) when I have come across a very disheartening problem.
Prior to this update, I was running VMWare Server 2.0 with its normaal admin console at localhost:8333 and an applet install under Applications -> System Tools -> VMWare Administration Console. Now that I have updated, both these are missing or inoperable.
However, the VMs hosted by the machine are still perfectly functional. I can login to the via Remote Desktop or VNC as the case may be.
I can also no longer see the /var/lib/vmware/Virtual Machines folder or any VMWare folder at all, even when using the full root login and permissions. Find and Search also show a disturbing lack of the 64Gb of VMDK files that are the running VMs.
Any clues as to how I can track down this invisible, but functional install? I do not want to proceed with another update until I get a solid backup of the VMDKs.
View 2 Replies
View Related
Nov 5, 2010
I looked around, but found no results that really matched and I would like to point out that I am fairly new to linux, so this may be a very obvious answer to some of you.I am running fc12.i686, installed from a disk in the back of a book for a class. No one else in my class is having this issue.When I select System > Administration > Network I am given this error: Failed to execute child process "/usr/bin/system-config-network" (No such file or directory). I am not so new to not realize that this file is not there, which I confirmed with an "ls -a". My question is, is there any way that I can download and install that bin? Or perhaps replace/repair it with the disc? It was supposed to be in the original install and my have been, the only thing that I have done in the /usr/bin/ directory is I tried to install Java (6.22 I think it was), which told me it installed correctly but didn't work when I tried Minecraft.
View 3 Replies
View Related
Nov 22, 2010
Searching for what appears to be "missing" CompizConfig settings in the CompizConfig Settings Manager. How to change the "Cube" into a "Cylinder" and how to enable floating windows (windows that seem to hover just over the cube when it is rotated. Were these eliminated? They were both available in 9.10.
System: Ubuntu Maverick Meerkat
SubSpecifics: SuperOS [URL]
View 2 Replies
View Related
Jun 24, 2011
Regardless of the fact that editing these files is necessary for good functioning of my system, my standard 10.10 ubuntu installation seems to lack these files:
XF86config
Xorg.conf
/etc/printcap
Am I the only one who witnesses this in ubuntu? Perhaps I need to apt-get install some things? Knowledge about these files is important for my study.
View 1 Replies
View Related
Nov 5, 2010
Trying to install an XP Pro virtual machine as a guest in VMware Workstation 7.1.2, fails with the error: "Could not open /dev/vmmon. No such file or directory. Please make sure that the kernel module 'vmmon' is loaded".Host OS is Debian-Lenny. Was able to specify the new virtual machine configuration, but VMware failed to create the new image (because of the error specified in previous paragraph).
Is the problem that Debian is not loading/executing a needed process? Should I be directing this problem to either Debian or VMware? I searched the VMware documentation, and it mentioned something about chkconfig (Redhat), or the rcconf/ksysv utilities to change SUSE configuration levels. I am unfamiliar with the syntax, don't know why this is necessary.
View 3 Replies
View Related
Oct 20, 2009
I've been trying to install Vmware Workstation and keep getting an error about Kernel Headers missing! Although I am pretty sure I have the headers installed for my system. It's looking for the PAE version of my headers which I believe it doesn't exist!
View 13 Replies
View Related
Apr 24, 2011
I'm having problems with networking. I just installed Debian 6 SServer LAMP and it didn't autoconnect to internet. I plug in the internet to my eth0 (default) port, and I keep getting timeouts. I found that dhcp3-client was not installed and fixed that. My etc interfaces has this for eth0: Auto eth0 Iface eth0 inet dhcp What other packages or config do I need to make the internet work? It's missing something basic that wasn't setup properly. I do get the correct dns address to my isp provider when I check etc resolv.conf. It just can't dhcp discover.
View 1 Replies
View Related
Sep 1, 2011
I recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop
How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)
View 5 Replies
View Related
Jan 9, 2010
I have installed VMplayer 3.0.0 on a Fedora 12 64 bit system. It seems to have installed ok with no error messages. However when I start the VMplayer it flashes up on the screen and goes again and will not run. has any one had a similar experience and if so what was the fix? I installed the package because i understand it will run Windows 98SE ok. O need it to run two pieces of Windows software. All I need is networking and access to a floppy drive once so I do not need sound and all the other bells and whistles.
View 4 Replies
View Related
Jul 31, 2011
How does one remove VMPlayer ? The uninstall option does not work.
View 6 Replies
View Related
Feb 11, 2010
I installed vmplayer, run the bundle script, couldn't see what got installed where, just as in Windows so it seemed. There is no uninstall script I started vmplayer and got a list of messages.
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines/libxfce.so) initialization check failed: Gtk+ version too old (micro mismatch)
(ten times)
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines
[code]....
Some modules are missing in the generic kernel.As well as a 'VMware module kernel updater' screen saying that the Kernel headers for version 2.6.29.5-smp were not found. They are clearly present..
View 4 Replies
View Related
Mar 10, 2011
Today I installed OpenSUSE11.4 an tried to install VMware Player but after starting player is wanted to compile and I got the messages below:
Mar 10 22:47:18.350: app-139681465902848| Log for VMware Workstation pid=12510 version=7.1.3 build=build-324285 option=Release
Mar 10 22:47:18.350: app-139681465902848| The process is 64-bit.
Mar 10 22:47:18.350: app-139681465902848| Host codepage=UTF-8 encoding=UTF-8
Mar 10 22:47:18.350: app-139681465902848| Logging to /tmp/vmware-root/setup-12510.log
[code]......
View 9 Replies
View Related
Jul 12, 2009
I'm running Fedora 10 as host to vmplayer guests (win98se, Ubuntu 9.04). Each can connect to the Samba server and give me access to my home directory and 'backup' partition. Samba and nfs are both running. So far so good.
I've just installed Fedora 11 as a vmplayer guest. When I click Places > Network Nautilus opens up showing only Windows Network. Double-click on this item and I get a pop-up message: "Unable to mount location. Failed to retrieve share list from server." SELinux is disabled for the moment. I tried to mount the 'backup' partition: mount -t ext3 catinthehat2:/archive /mnt/archive but get the message: mount: special device catinthehat2:/archive does not exist.
View 4 Replies
View Related
Feb 17, 2010
how to access local drives in vmplayer
View 1 Replies
View Related
Jan 31, 2011
I recently wanned to use my vmplayer installation and I got the following error : /usr/lib/vmware/bin/vmplayer: symbol lookup error: /usr/lib/vmware/lib/libvmwareui.so.0/libvmwareui.so.0: undefined symbol: vmodl_vmomi_key_any_value_get_type
I try to reinstall vmplayer. It didn't help.
View 2 Replies
View Related
Mar 30, 2011
What is a good distro with vmplayer installed by default.
View 2 Replies
View Related
May 8, 2010
i am using vmplayer 3.0 for linux. and i want to insert module on ubuntu 9.4 which is running on vmplayer. how can i insert new module on vmplayer.
View 1 Replies
View Related
Jul 29, 2011
The vmplayer for linux couldn't be installed successfully on rhel5.x version.Anyone has encountered this kind of problem?
View 2 Replies
View Related
Mar 30, 2010
I've tried to run a Clonezilla VM using vmplayer. All works fine except when I get to the cloning section. I have three partitions on the HD; partition A, B and C.
A = Partition to clone
B = Partiton onto which the clone image of PartA is to be saved
C = OS partition which is running the Clonezilla VM.
I would like to save the partition as an image but when it actually comes to the nitty gritty of partition cloning Clonezilla does not recognise PartA or PartB. I get error massages along the lines of "No unmounted partitions found." When I drop into a shell prompt the fdisk -l output shows nothing. However, running from the liveCD it recognises both these along with PartC. Is there a way of carrying out the cloning using this method by tweaking vmplayer settings or is the project just not possible ?
View 5 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Aug 1, 2010
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies
View Related
