OpenSUSE Network :: Make Apache Mod_rewrite Work?
Jun 1, 2010
I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?
View 9 Replies
ADVERTISEMENT
Jun 27, 2011
I have mod_rewrite and mod_proxy loaded properly for the apache2 package in 11.04. I added the following to the bottom of my apache2.conf:
RewriteEngine: On
RewriteRule: ^/$ /test [L]
The server restarts fine, but / is not getting rewritten in the slightest. And when I added the RewriteLog directive, the log file had absolutely nothing in it.
View 3 Replies
View Related
May 1, 2011
On one of my servers (Centos 5.5), I have been hosting articularly complex CRM application for one of my clients. Recently they have asked about configuring SSL connections to the CRM. Problem is, SSL is already configured for their main domain but not the sub-domain where the CRM application is accessed. Rather than purchasing another SSL certificate for their sub-domain (and probably another IP address),ld it be possible to setup a redirection from the subdomain to a sub-directory in the SSL directory using mod_rewrite. I have searched online and through the other posts on LinuxQuestions but nothing I have tried works.For example:[URl]
View 2 Replies
View Related
Mar 26, 2011
I have a 3G modem Huawei e173s-6, the usb id is 12d1:1c0b. It's only detected as storage, not as modem. According to some tutorials I've found, I had to use usb_modeswitch and udev rules to make it automatically switch to modem mode, and usb id 12d1:1c05. I followed the tutorials, and the usb changes the id, but after the switch it is still recognized only as storage.
I have the suspicion that I have to add the driver to the kernel, since this is 11.3, but I haven't the slightest clue what to do. Does someone have experience making this modem work in 11.3? tutorial: USB_ModeSwitch ~ View topic - Huawei E173s working config
View 4 Replies
View Related
Feb 19, 2011
I have ubuntu 10.10. I installed apache2 Php mysql and phpmyadmin through the package handler. it worked after that I instaled Imagemagick , and imagick for PHP. than I installed mod_rewrite for appache2. I created a folder in /var/www/ called shimmie. I copied there my codes and after setting up htaccess it worked fine. url rewrite worked. thumbnails with imagick appeared along with normal images. Yesterday I got another webpage project. but it required apache mod_ expires and mod_headers and installed it. And installed Xdebug for PHP. after this I put the webpage to another /var/www/ folder called fashion. Now in fashion everything works as its needs to: url rewrite , expires.. everything. But now my original folder shimmi, doesnt works: no url rewrite, no imagick thumbnails nor the original image shows up.
the folder belongs to my user and set is that every thing can read it and write it.
EDIT: I even copied the shimmie folder toa new and still didnt work, so i re created it... and still doesn't work.... why is thats the only thing that cant use .htacces and imagick?
[URL]
View 1 Replies
View Related
Jun 23, 2010
I'm having a real problem getting Apache to allow a symlink on a particular folder. The symlink is at /var/www/html/images and it points to /home/foo/images.Here is the relevant section to my httpd.confQuote:
<Directory />
Options +FollowSymLinks
AllowOverride None
[code]....
View 6 Replies
View Related
Mar 20, 2010
I am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies
View Related
May 23, 2010
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
View 10 Replies
View Related
Jun 15, 2011
I've a server with opensuse 11.4 (from a 11.3 upgrade), but I can't run Apache.. I've tried latest version (official repository and Apache repository), but it give me always same error:
[error] (38)Function not implemented: apr_socket_accept: (client socket)
I've have removed and reinstalled apr/apr-utils also, but nothing..
View 2 Replies
View Related
Jan 6, 2010
I've been using Slackware distribution for few years now, Setup new system with Xen Server 5.5 and installed Slackware 13 on it, but network card is not detected and can't seem to make it work.
View 4 Replies
View Related
Mar 31, 2011
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies
View Related
May 30, 2010
My wired network is not working! This is the result of ifconfig -a:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:25:3e:fe:50
inet6 addr: fe80::21c:25ff:fe3e:fe50/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 8 Replies
View Related
Mar 27, 2010
I have installed openSuse and set up a as web server have apache2 running but need to change the MPM to worker. How is this done, I am new to OpeneSuse and Unix/Linux I know where to change the worker settings I just need to enable it over the prefork default. I know how they work I just need how to change to worker.
View 3 Replies
View Related
Mar 28, 2010
I desperately need to get my apache server on OPenSuse to use the worker MPM I have tried simply placing worker in the quotes of the apache file /etc/sysconfig/apache2 but when I stop and start apache in the task monitor it is still showing the httpd2 processes to be prefork. Also there seems to be a problem on restart saying it cant find MPM.
View 9 Replies
View Related
Jul 11, 2010
I was trying to set up a virtual host, but I could not find a sites-available to it. What is its alternative
View 3 Replies
View Related
Nov 25, 2010
There seems to be many different ways of controlling bandwidth usage of downloads of content from Apache2. Does anyone know which is the standard module deployed/deployable in OpenSuse?
View 2 Replies
View Related
Jan 5, 2011
Apache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
View 9 Replies
View Related
Mar 5, 2011
I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
View 8 Replies
View Related
Jun 17, 2011
Does anybody know where the Apache benchmark program 'ab' is for opensuse? I don't find it installed or in the standard repositories.
View 3 Replies
View Related
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
View 2 Replies
View Related
Nov 20, 2010
Dear all, I have system running LAMP and acting as a regular webserver.After running the setup for quite some months, I start having major issues:Symptoms:1. Applications do not respond neither from LAN nor WAN - SSH daemon, Apache, MySQL, FTP2. Network still seems to work for ping and port listeners3. Telnet is still successful for 21, 22, 80, 33064. Server has to be restarted manuallyTrying to find out the issue, I went through /var/log/ looking for major issues or warnings. But nothing seemed plausible to me to understand the issue - except I knew I was running out of disk space a few times.Not being able to identify nor replicate the issue, I replaced the hardware running 24x7 since quite a few years. Doing this, I migrated at the same time from OpenSUSE 10.1 to 11.3.The machine itself is behind a firewall and only the above mentioned standard ports are accessible
View 4 Replies
View Related
Feb 5, 2011
I'm running OpenSuse 11.3 X64. I have installed apache2, PHP5 and MySQL in order to do some web-design offline e.g. they are for internal network use only. There is also phpMyAdmin installed. The default directory for the "server" is /srv/www/htdocs.
To access a specific site in progress I create a subfolder there then just navigate via h**p://10.13.23.201/NAMEOFFOLDER from my internal network. At least that is how it should work but it doesn't. I created a new folder called wlc so it's directory is /srv/www/htdocs/wlc however when I go to the address h**p://10.13.23.201/wlc I get a Remote Server Or File Not Found error from my browser, there is files in there ,index.php, that should load and apache has been set to recognize *.php files.
I know the theory should work as I can access /srv/www/htdocs/phpMyAdmin by going to h**p://10.13.23.201/phpMyAdmin and it loads just fine. Also the error is different if I go to a folder that doesn't exist for example h**p://10.13.23.201/THISFOLERDOESNTEXISIT will return an Object Not Found error.
View 4 Replies
View Related
May 19, 2011
I have a fresh install, everythings working great, just trying to get my vhosts working, i set them up in yast, but all the requests just go to the second vhost.
View 2 Replies
View Related
Jan 12, 2010
I think I put my question on a wrong sub-forum. My problem is I can't get apache to produce right output to XMLHttpRequest responseText but instead it displays php source code. On another server the same code works as it should.
When I open the php script on a browser window it works as it should.
this is the thread in programming sub-forum Apache sends php source code to Ajax - openSUSE Forums
I'm using Firefox 3.04 and SuSE 11.1
View 1 Replies
View Related
Feb 17, 2010
I have a problem to correctly configure apache / subversion and mod_dav in openSUSE 11.2 I have setup a virtual host on my home server (because I need to access it from the Internet), that should be a subversion server. The subversion root directory is the
Code:
/srv/svn/repos
I plan to use a separate directory for each project.
So, the svn tree will be/srv/svn/repos/project1/....
/srv/svn/repos/project2/....
/srv/svn/repos/project3/..
Apache serves the web pages (actually the directories) but since the documentroot and the SVN root are the same, it cannot handle the SVN repositories correctly. So, I re-read the Setting up a Subversion server using Apache2 - openSUSE how-to and followed it's suggestion. (Use a Location outside the document root) Anyway, the problem is that I have a 404 error, which of course is normal, since there is no alias set for the /rep location I use.
[Code]...
View 1 Replies
View Related
May 4, 2010
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
View 2 Replies
View Related
Jun 16, 2010
I have both apache and tomcat services running, both in their standard doors (tomcat 8080, httpd 80). I need to setup tomcat to run on door 80 instead of httpd. I changed httpd door with success to 8180. Now I want to change tomcat6 door to 80, and I did that by editing server.xml config file of tomcat. After restarting tomcat, the system tells me it's ok, but I can see that it's not running on 80, nor at any other door. A simple nmap search confirm that. What should I do to have tomcat running in door 80?
View 5 Replies
View Related
Jul 17, 2010
I have written a simple perl program to add a command to iptables. Here is my code :
Code:
#! /usr/bin/perl
print "Content-type: text/html
";
system("iptables -A FORWARD -s 192.168.0.2 -j DROP");
I put this file in cgi-bin folder of Apache server. Here is my problem : when I run this file with shell as root user it makes change to iptables, but when I use my browser to run this file, it doesn't make any change. I'm sure this is because Apache doesn't have permission to manipulate iptables. How can I start Apache as a user with root privileges ?
View 8 Replies
View Related
Nov 14, 2010
I am unable to examine Apache httpd error log from YaST2 because the lines are too long; the browser just truncates them and thus it does not show any description. The only option is to save it. However, when I chose that option, YaST2 encourages me to save it in /tmp, and as soon as I do that, the log becomes accessible to every user!
View 5 Replies
View Related
Jan 16, 2011
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error
MySQL said:
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
[Code]...
View 1 Replies
View Related
