OpenSUSE Wireless :: How To Make WiFi Work
Aug 24, 2010I have an Acer Aspire 3003LMi and BCM4318 card and installed opensuse 11.3 on the laptop.Please if someone does or knows how to make wifi work.
View 9 RepliesI have an Acer Aspire 3003LMi and BCM4318 card and installed opensuse 11.3 on the laptop.Please if someone does or knows how to make wifi work.
View 9 RepliesI've been reading up on how to get the Broadcom BCM4312 802.11b/g on my Dell Inspiron 1525 to work with OpenSUSE and I've tried everything, I've even re-installed the OS 3 times as I seemed to keep screwing something up. I've tried doing what it says in this thread
Install Broadcom Drivers from Packman
I thought I'd installed the write drivers with this code:
Code:
zypper in broadcom-wl broadcom-wl-kmp-default
I installed openSUSE 11.3 under 2 machines, one of them using a Linksys USB wireless N adapter (rt73usb) and another using an Atheros AR5001 Wireless Network Adapter (ath5k). I have a Belkin f5D8236-4 router, with the SSID "linksys". I also have an Ubuntu 10.04 machine which has working wireless internet. I know almost nothing about networking, but from what I can tell, openSUSE 11.3 seems to have trouble with DHCP, specifically setting the dynamic IP address. To try to go about fixing this, I attempted to set a static IP, but I am quite confused by all the settings.
I have tried both the graphical "Network Manager" (KDE, Gnome, and command line versions) and ifup, both with no luck.
Here is the information from the working Ubuntu machine code...
Last week used lxde11.3 and no problem connecting. Today I switched to xfce11.3
and the wifi card is registering fine as connected but it doesn't send the key out
apparently to register the connection to the modem so it is fully activated.
I think lxde had a network manager but in xfce here I'm using Yast. What mismatch
do I have here ? How do I start a network manager so the key will connect ?
After instalation of Suse 11.4, wifi worked totally correctly, until the first restart. Then it ceased to work. It looks like everything is working correctly until WPA authentication.
My wifi device
Code:
So until now it looks for me that everything works correctly, but after trying to connect the problems begin.
dmesg output:
Code:
So the wlan interface authenticates, and then disauthenticates by local choice? a bit about the reason points to wpa_supplicant. Many peoples report that they have multiple copies running, and killing them solves a problem. Sadly I've only one copy, and after being killed it restarts.
Here is wpa_supplicant.log on the first run after install(when it worked)
Code:
And here is log of what happens after restart:
Code:
I've no way to change from WPA authorization.
Wifi works on 11.3 with installed the broadcom-wi & broadcom-wl-kmp-desktop,but this trick doesn't work on this new 11.4.
View 9 Replies View Relatedi have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies View RelatedI recently installed Suse 11.4 on my Dell Latitude 2110 netbook using the KDE live distribution, and, after that, the Broadcom wireless ceased to work. To enable the wireless connection, I have to press Fn + F6. If I do it now, the wireless led indicator turns on for a couple of seconds, then turns off again. Moreover, the option to enable the wireless connection in the network manager is greyed out
lspci output:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
iwconfig output:
Code:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Encryption key: off
Power Management: off
dmesg output:
Code:
[8.330963] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[8.362403] brcm80211 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[8.362422] brcm80211 0000:0c:00.0: setting latency timer to 64
output of rpm -qa | grep broadcom:
Code:
broadcom-wl-kmp-desktop-5.100.82.38_k2.6.37.1_1.2-7.pm.8.1.x86_64
broadcom-wl-5.100.82.38-7.pm.8.1.x86_64
I recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X
PEAP
blank anonymous identity
no CA cert (I suspect this might be the problem)
PEAP v 1
MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?
It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.
I have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
My PC is connected directly to the cable modem. I would like to use my PC's WiFi card to share my internet connection with my Android phone and laptop so I can avoid buying a wireless router.
View 4 Replies View RelatedAfter I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.
View 1 Replies View RelatedI just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
I can not get the wireless to work on my hp netbook 1010nr after install, if i get on line with an ethernet cable what software do i need to download to make the wireless work?
View 2 Replies View RelatedI own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedIt's my very first time to use Ubuntu. I have just installed it but I can't figure out how to make my wireless internet connection work..
View 2 Replies View RelatedI've downloaded all the drivers and have an ethernet connection working however as I have an INSPIRON 1545, the network card is shoddy for LInux and I can't get the wireless working AT ALL.
lshw -C network
*-network
description: Network controller
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
[code]...
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View RelatedI have an Eee PC 1005 dual-booting Windows 7 and openSUSE 11.3. Everything is nice and polished except for one thing.The first tweak I made to the system was the kernel parameter "acpi=Linux" which made the Fn keys work. Then I installed eee-control from the openSUSE Build Service, which worked very well (I was getting a bit frustrated; the source would build and install, but eee-control-daemon would immediately die. Anyway.).
My problem is that when I press the Fn-F2 combo to disable wifi, all mention of wifi completely vanishes from the tray applet. Even when I press Fn-F2 again to turn the radio back on (and the light does cycle like it does in Windows), it is gone. I need to reboot with the radio on, then it works perfectly again, until I press Fn-F2 again.
I have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.
View 2 Replies View Relatedgetting my wifi to work with opensuse 11.1 and i've tried everthing to get the driver installed.
So far i have downloaded the driver from rallinks website for the RT3090, I have tried to install the .tgz but its doesn't appear to do anything when i run thru the
# ./configure
# ./make
# ./make install
anyone managed to get the WiFi working using the RT3090??
I have my openSUSE 11.2 connected to router by wifi. I want frequently to access it from my LAN or even Internet, but even so frequent the connection is lost for some reason.
When I am at the box, I can easily do a ifdown/ifup and it will reconnect, but that is a pain when I am not local.
is there some way or maybe a script to check the connection so now and then and if not online then re-connects it automatic ?
I have an HP6720s notebook and just installed 11.2. Unfortunately my wifi will not start. I have manually installed the firmware and i still can not bring the wifi up and running.
when i check with demsg i get the following:
28.170289] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 29.904055] b43 ssb0:0: firmware: requesting b43/ucode13.fw
[Code].....
I've got a Suse 11.2 laptop with a bluetooth Wifi device (recognised and working), and an Android 2.1 smartphone (Motorola Milestone). I would like to connect the two via Wifi. I don't have a Wifi router, I've just used it now and again through hotspots. I normally connect to the internet via a mobile broadband USB dongle.So, I suppose I need to configure my laptop as a Wifi router in order to set up our little private LAN between the two devices. Is that right? If yes, can someone please point me to a relevant howto because I've searched high and low and didn't find anything. :-(If the above is not right, then where should I look, please? Is it possible at all, actually?
View 2 Replies View RelatedI've installed opensuse 11.3 few days ago on my laptop, and it seems after kernel update, wifi refuses to work. I'm using gnome and after the update the iwlagn module was not present in the 'ifup'. So i run modprobe iwlagn and here is the output.
View 3 Replies View RelatedI currently have a WiFi network at home that serves two PC's, a Laptop (all SUSE 11.3) and a couple of WiFi radios. I also use IPCop as the Firewall. The system currently uses 802.11g, but the PC's and Laptop really struggle to achieve any reasonable internet data speeds, particularly as their RF range to the Wireless Router is very disappointing, so I have a couple Wireless Access Points. Unfortunately, whilst these WAPs might slightly improve RF coverage, connecting to the Router via one of them only serves to slow down the internet upload and download speeds even further. (Not much point in paying for expensive 4M internet access if I am only achieving a typical download of 500-600k!)
I want to completely replace my 802.11g with 802.11n - to both improve range and throughput. I'm looking at the 'Netgear Range Max Dual Band Wireless-N Gigabit Router' as this also has 2.4GHz (my WiFI radios are only 2.4GHz compatible). Unless, of course, anyone has any good reason to recommend I DON'T purchase it? My problem is that I am struggling to find up to date, accurate information that can advise me on which 802.11n (2.4GHz and 5GHz) PCI cards, PCMCIA and USB Adapters are compatible with SUSE.
I have installed Suse 11.4 recently and I'm trying to run the wireless connection and doesn't works.
Details:
card: pro/wireless 2200BG Calexico2
driver installed (as console said) kernel driver:ipw2200
hwinfo:
Code:
linux-4pom:/home/victorplata # hwinfo --netcard
25: PCI 604.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.BmKY+aW7YM0
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:04.0
SysFS BusID: 0000:06:04.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
I have tried to connect by traditional method with YAST, just recognized one network call "Hotel Riga 228", but doesn't connect. Also I have tried to connect with Network Manager but this application doesn't recognize ANY w. network.