i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 RepliesCannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies View RelatedI just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedNew SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
I am attempting to setup a linux file server in active directory. It has been kind of an ongoing project(nightmare) for me... I have tried a few distributions of linux and I have to say I really enjoy openSUSE. YaST is my best friend. Now to the problem at hand.
I have samba installed and configured for the domain. I was able to successfully join the machine to the domain. I can even log on using domain user names and passwords (more than I was able to accomplish with other distros...). Where I am having a problem currently is I cannot see the suse machine from a windows machine. I can access shares from suse to windows though.
how to connect my network data card to run internet on openSuse..
View 4 Replies View RelatedHow do you set the MTU on the network card for Jumbo Frames? The MTU drop drown only goes to 1500 which is far from the Jumbo frame rate of 9000. If I type 9000 in will it blow anything up?
View 5 Replies View Relatedi've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
We have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies View RelatedI've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies View RelatedComplete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:
Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?
Wireless card detected but cannot connect to a wireless network
I have install it suse 11, and everything went well until the wireless thing is not working, my card is Broadcom BCM4318, I see my card on the network settings but I cannot configure the card, and also I cannot connect to a wireless network, can someone tell me what to do here, I am loosing my patient....
So I've got a Dell Poweredge R410 with SUSE Linux Enterprise Server 11 installed and my boss wants me to configure it like this:
Eth0 - No IP address (on general tab, activation set to "never")
Eth1 - No IP address (on general tab, activation set to "never")
Eth2 - No IP address (on general tab, activation set to "never")
Eth3 - No IP address (on general tab, activation set to "never")
bond0 - eth0, eth1, eth2, eth3 selected (Activation set to "On boot") No IP Address
bridge0 - bond0 selected (Activation set to "On boot"). IP, subnet and hostname defined.
The DNS and routing has all been set correctly. The problem is when I set the network configuration as above I cannot connect to the network I'm unable to ping the gateway. I only have 1 cable connected and it's plugged into eth0 but apparently this doesn't matter. If I delete the bond and bridge and instead apply the settings to eth0 it connects no problem but my boss wants to use load balancing and states that that setup should work.
Intel 1000GT gigabit Network Card itself installed successfully and shows up under network cards. However, when I plug it into the network in place of the regular 100mbit card, it won't show up.
View 8 Replies View RelatedIn my client side, i got 4 machines(2 database server,2 application server). One database server for DC and another database server for DR. Similarly, I need to use the application server also. The two database server are having the same ip.(192.168.1.10) and two application server are having the same ip(192.168.1.11). But they give the another ip for all machines like below.
DC-Database server-10.168.12.40 DC-application server-10.168.12.21
DR-Database server-10.168.13.40 DR-application server-10.168.12.21
Now i want to do the IP Natting.
My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I have linux mint 17 quiana cinnamon
I am in a dual boot with Ubuntu and win 7 wireless. When I install 11.3 I no longer have Ubuntu. Is there a process or procedure to assure multiple boot while I attempt to connect suse to my network
View 5 Replies View RelatedI would like to use my SuSE 11.2 1TB RAID server to backup my mac using time machine. I found several tutorials on the web for using netatalk over ssh, but all these tutorials are for Ubuntu and require the debian package. Has anybody compiled netatalk over ssh under SuSE? I cannot verify if the netatalk package installed by the SuSE installer has been compiled with this option. Alternatively could somebody point me to any documentation to help me compile netatalk? I tried reading the netatalk manual from sourceforge, but that asks for installation of a Berkley DB that is not required under Ubuntu.
View 7 Replies View RelatedEthernet configuration:
- eth0 private net
- eth1 internet
eth1 is connected to a cable modem and uses dhcp. After migrating to suse-11.2 ip-forwarding (once the system is up and running) is sometimes deactivated and i have no clue why. /etc/syslog.conf has an entry net.ipv4.ip_forwarding = 1
i have modified the SuSE-scripts /sbin/SuSEfirewall /sbin/ifup-dhcp /etc/init.d/SuSEfirewall2_setup to make sure each time my firewall-rules are loaded ip-forwarding is explicitly enabled. This worked perfectly with suse-11.0. Now ip-forwarding is enabled after a system reboot or after one of the above scripts is called, but somewhere somehow ip-forwarding is always deactivated and i have no idea how this happens. This may happen after 5 minutes or after 5 hours. As a workaround i created a cronjob running every 5 minutes issuing a sysctl-command to enable ip-forwarding.
i using before ubuntu and in them it was simple just in the terminal sudo ppoeconfig but i dont know to config it in suse 11.2.
View 1 Replies View RelatedOne of biggest reason I need to use windows is because my company uses Juniper SSL VPN to remote desktop into our company's computer. Our company doesn't allow any native linux/windows app client, only the web SSL VPN is enabled.
Looks like this Juniper SSL VPN only works on windows computers. It makes the windows remote desktop client connect over the SSL web VPN from browser. Of course, linux/SUSE doesn't have the windows desktop client. Is there any way to get RDP work through the given SSL VPN? Otherwise, I guess I need go back install windows and starting using it again.
I am with a customer who has Suse 10.1 in production environment and connected to the internet.For now I want to install denyhosts on this machine since I see lots of failed login attempts outside office hours.However when I do: python setup.py install I get the message File "setup.py", line 4, in ?from distutils.core import setupmportError: No module named distutils.coreI don't know how to solve this. I have added a repository to install distutils.core but could not find it
View 1 Replies View RelatedI know openSUSE (and SUSE Enterprise) work great with windows Active Directory.Now, I understand that Linux systems are far more stable and secure (if configured properly). What about features though? What does openSUSE/Linux have instead of AD for file/folder sharing across the network? Are there roaming profiles? If so, how do I use that?I love openSUSE because of yast (and a few other things). And It's my main LinuxOS on my tower. I am still in college getting my certs and a degree (in networking). I really want to understand why Linux (openSUSE/ SUSE enterprise) is a better networking solution as opposed to Windows Sever 2003/2008.Also, why SUSE over RHEL/CentOS? Yast is awesome, but are there other reasons?
I know that's a lot to ask in one post. Feel free to include links so you won't have to type too much.I'd like both personal opinions, hard facts, and just general user experiences as to the features that make Linux (openSUSE) better, not just the stability and security.
I've setup vnc over ssh tunnelling however the Suse firewall seems to be blocking it. On the local host I have this in ~/.ssh/config:LocalForward localhost:5900 remotehost.com:5900 The problem is that this only works when I either disable the firewall or add an exception for VNC. Both of these actions defeat the whole purpose of ssh tunnelling since they leave my VNC port open to the outside world (very insecure).
View 2 Replies View RelatedI don't know how to change the dns to the dns of Google 8.8.8.8 as primary and 8.8.4.4 as secondary
in version 11
there is icon marked as update dns service via dhcp after u unmark it u can put it manual
in 11.3 there is no icon
+ there is no separate icon for the dns configuration in the network service category
so how can i change the dns?
I'm dummy in linux world and maybe someone can help? Installed Opensuse 11.4 64bit on Hyper-V virtual machine all is working fine except sometimes lan connection is lost.
Code:
/etc/init.d/network restart
is not helping and I need manual reboot.Why that? What's problem? In routes table I can see default gw.
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
178.16.16.192 * 255.255.255.192 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 178.16.16.193 0.0.0.0 UG 0 0 0 eth0
I have a windows machine (in a domain) and I have created 2 Virtual Machines with Suse 11.2 installed on them.Now, I want to share a folder in windows to both Suse images. I am succesfully able to do that.I used: mount -t cifs -o user..... command to mount it at /mnt/win on my linux and succesfully able to work with it.
Now, I want a user in my Linux box (both Linux images)to be able to write to the shared folder in windows (actually both linux images will write to the shared folder but it is based on acquairing locks and releasing them to be able to use the shared folder on windows).
I tried etc fstab and lot other options but my efforts were in vain.Simply put - I need a user in my linux box (suse 11.2) to be able to write to a windows shared folder.
I just installed SUSE in a VMware to test it out. A problem i've had with VMware before was getting the wireless to work. I was wondering if anyone knows a way to get the wireless to work over the VMware and in SUSE. I know this may not particularly be a SUSE question but all I saw in the VMware forums was one response that said it was not possible.
View 1 Replies View Related