OpenSUSE Network :: Unable To Share Folder With Suse 11.2?
Jan 11, 2010
I have a windows machine (in a domain) and I have created 2 Virtual Machines with Suse 11.2 installed on them.Now, I want to share a folder in windows to both Suse images. I am succesfully able to do that.I used: mount -t cifs -o user..... command to mount it at /mnt/win on my linux and succesfully able to work with it.
Now, I want a user in my Linux box (both Linux images)to be able to write to the shared folder in windows (actually both linux images will write to the shared folder but it is based on acquairing locks and releasing them to be able to use the shared folder on windows).
I tried etc fstab and lot other options but my efforts were in vain.Simply put - I need a user in my linux box (suse 11.2) to be able to write to a windows shared folder.
View 2 Replies
ADVERTISEMENT
May 13, 2010
I wanted to enable file sharing in for one of my folders under the home directory. I noticed that the 'not shared' and 'shared' always defaulted back to 'not shared'. And now I see what looks like an electrical plug icon symbol over the folder icon symbol like I might see used for some of the root folders. What does the new icon indicate about the folder attributes and why does file sharing default to 'not shared'?
View 1 Replies
View Related
Apr 10, 2011
I'm using openSUSE11.0 in VirtualBox 2.2 on XP so files need to be shared between it and the host. But do I have to mount the share folder every time? Here's what I typed in terminal:
sudo mount -t vboxsf share /media/share
// the first share is the folder in the host, and it works for each time
How could I set it once and for all?
View 5 Replies
View Related
Feb 9, 2010
figure out how to share the folder to only special user? For example I have two computers host1 with users: user1, user2, user3 and host2 with same users: user1, user2, user3, how to share test user2 folder form host1 to only user2 from host2 ? My system is openSuse 11.1. There is all Ive understood:
host1
[test]
inherit acls = Yes
path = /home/user2/test (drwxr-xr-x)
read only = No
guest ok = Yes
read list = user2
valid users = user2
admin users = user2
host2
mount t cifs //host1/test /home/user2/test
It works but either user2 from host2 cant write to test share on host1 (drwxr-xr-x) OR all can write in this share (drwxrwxrwx). Ive googled it, searched here and read this: Chapter16.File, Directory, and Share Access Controls, but without successes.
View 9 Replies
View Related
Sep 13, 2010
I tried to mount a NFS share folder from another subnet. The NFS client on my SUSE 11 server could not detect it. The folder is in a different subnet. Is some one know how to make it work?
View 6 Replies
View Related
Feb 25, 2010
im linux newbie and im trying to build a small cluster using suse 11 and run in parallel fortran by using MPI. I ve made all the preperation (network communication, ssh, sharing using samba etc). I can access the pc's through network, either with their IP's or their hostnames.Now i have to define in one pc (master node) a path to a shared folder where all other clusters will have full access. Usually in windows we can do this by using something like \hostnamesharefolder_name. This haven't work in linuxWhen i access the folder from another pc i.e through nautilus the path is smp:/hostname/sharefolder but i can't use such a path because i think don't recognize the smp:/ . Is there any way to define universal paths where the clusters will look for them in the network
View 4 Replies
View Related
Oct 12, 2009
Today I try to shared a folder for Windows XP using GUI in OpenSUSE 11.1. I created a folder --> right click and click on Share --> Check on "Share with Samba(Microsoft Windows)", "Public" and "Writable". Then connect from Windows using //192.168.100.1/sharefolder. It open up but I can only read (no write access as I check on "Writable"). Did I miss something?
View 1 Replies
View Related
Jun 20, 2010
last night i have install SUSE 11.2 from the live CD. I have dual boot system with windows.Here is the problems.....i m able to access internet using same connection in windows but unable in suse.
View 3 Replies
View Related
Jun 10, 2011
Just installed Suse 11.4 Kde build. Using 64 bit ECS A780GM-A Ultra Mobo, 4 gigs ram, Athlon 7550 CPU, I am unable to detect my Verizon broadband MIFI 2200 with this new OS, have used Ubuntu in the past. Plugged in USB cable for modem into different ports, still does not work,
View 1 Replies
View Related
Dec 10, 2010
My server info:
SUSE 11.3 , authenticated against LDAP, I am able to log in using LDAP credentials.
I did run smbpasswd -w password
After I configured the smb.conf file, I try to do this on the Terminal to make sure it will work in Windows machines but I got this error:
user@mybox:~> smbclient -L mybox.mydomain.com
Enter user's password: (I enter the user password here)
Connection to mybox.mydomain.com failed (Error NT_STATUS_CONNECTION_REFUSED)
so I went to /var/log/samba.log to check the error file, I got this :
Connection to LDAP server failed for the 1 try!
[2010/12/10 18:08:50.919813, 1] lib/smbldap.c:1330(another_ldap_try)
Connection to LDAP server failed for the 2 try!
[2010/12/10 18:08:52.133624, 1] lib/smbldap.c:1330(another_ldap_try)
Connection to LDAP server failed for the 3 try!
and it kept going on and on until I stop it.
Here is my smb.conf file, please take a look to see what I've done wrong here. I tried to to take out WORKGROUP in GLOBAL but there were error like " Work group name x.x.x.com is too long, so I put in WORKGROUP = etc.
[global]
workgroup = mybox
passdb backend = ldapsam:ldap://ldap.my domain.com:11389/
ldap suffix = dc=my domain,dc=com
name resolve order = wins bcast hosts
ldap machine suffix = ou=Computers
ldap user suffix = ou=People
ldap group suffix = ou=Groups
ldap admin dn = "cn=sambaLabs2,ou=roles,dc=domain name,dc=com"
ldap ssl = start tls
server string = "my File Server"
security = user
log file = /var/log/samba.log
log level = 1
Max log size = 50
wins support = yes
wins server = my wins servers here
winbind enum users = no
winbind enum groups = no
unix extensions = no
wide links = yes
hosts deny = ALL
hosts allow = 192.168.
interfaces = lo eth0
bind interfaces only = true
browseable = No
read only = No
usershare allow guests = No
load printers = yes
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
map to guest = Bad User
[homes]
comment = home directories
browseable = No
valid users = %S
read only = No
writable = yes
create mask = 0660
directory mask = 0770
inherit acls = Yes
inherit permissions = yes
[sharefolder]
path = /sharefolder
valid users = @users,%S
inherit acls = Yes
inherit permissions = yes
[printers]
path = /var/spool/samba
browsable = no
public = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browsable = yes
guest ok = no
read only = yes
write list = root
force group = ntadmin
create mask = 0664
directory mask = 0775
Thank you in advance.
View 1 Replies
View Related
Aug 13, 2010
I'm pretty new to using Linux and I installed SUSE 11.3 on Sun Virtual Box to play around with it. I am trying to mount one of my Windows shares to my SUSE system and I'm getting an error "Mount error(13): Permission denied". I have made sure my Windows permissions are open, in fact I used a test share and added everyone and gave full control. Below is the command I tried to use to mount it.
mount -t cifs -o username=Nick //computername/share /mnt/temp
I pre-created the temp folder under mnt and I tried both my PC name and my ip address in the above command with the same error each time. I also tried using my pc name in my username string as well "username=pcname/Nick" and that did not work either. Can someone advise me why this error is occuring?
Kernel version: 2.6.34-12
Thanks,
Nick
View 1 Replies
View Related
Jan 21, 2010
I am unable to share a folder on my Ubuntu 9.10 desktop machine. Networking is working, I can see and be seen by windows machines and also my Ubuntu 9.10 laptop. The laptop is able to share folders with no problem. The error message I get when I try to set sharing on a folder is "'net usershare' returned error 255: net usershare add: cannot convert name "Everyone" to a SID. Memory allocation error."
I know there has been a thread relating to this in the past, but the solution there did not work for me, and I have been beating my head against the wall for a couple of weeks on this problem, and have spent a bit of time with smb.conf. I would hate to have to do a new install to fix this, after all this is not MS windows!Can anyone point me in the right direction?
View 1 Replies
View Related
Nov 16, 2010
I had share my folder through network with other PC,now i want to Rivert(un-share) this,how can i..?
I had right-click on that folder but i didn't get any option for that....it's my first time of sharing data via samba..
View 4 Replies
View Related
Jul 31, 2011
I'm probably missing something really simple here...
In Ubuntu, with Nautilus, there is an easy GUI method of making folder to be shared and visible over the network.
I can't seem to find the means of doing this in Xubuntu, either in Thunar or Gigolo.
I can use either of these to browse folders on other networked machines I have shared using Nautilus.
I had Nautilus for a while on my XFCE machine and used that to share some folders, but I removed it as it was conflicting with Thunar at times.
View 4 Replies
View Related
Jul 12, 2011
In this post I will give a quick solution for a possible problem with sharing a folder in Fedora 15.I had to spend some time for research and frustration so, hopefully this post will save you from both. If you have Samba installed and configured to share certain folders on your Fedora machine for a Windows network but, they can't be accessed then following might solve the problem:
1. Go to Applications, Other and run FIREWALL
a). go to TRUSTED SERVICES and check SAMBA and SAMBA CLIENT that are located in the list of services
b). click APPLY
c). go to ICMP FILTER and check ECHO REPLY (PONG) and ECHO REQUEST (PING)
c). click APPLY
[Code]...
If your Samba is configured correctly, your shared folder should be available on your Windows network.A little hint: if you don't want other users to use passwords for accessing your shared folder, select SHARE as an Authentication Mode in Samba GUI Configuration Tool, Preferences, Server Settings, Security
View 3 Replies
View Related
Jan 20, 2010
We have a storage server here running Windows. I have full permission to my share, blah blah, whole 9 yards. When I'm on Ubuntu and connect to it, I cannot create a folder or paste any items in "my" folder unless I put it in a sub folder.\storagejason = cannot create folders.\storagejasonstuff = can create folders.So, I come here asking the obvious question: dubya tee eff??
View 1 Replies
View Related
Jan 14, 2011
my ubuntu machine disk is already full, i want to set the save location of of bittorrent to a network share in windows is this possible?
View 3 Replies
View Related
Mar 26, 2011
I have two suse installation, in one I placed on the dashboard a "note" (widget) with some notes, how can I share this notes in the other installation? Where can I found the file to make a link?
View 3 Replies
View Related
Sep 21, 2010
Is there a way to mount a Windows Share into a Linux folder? I'm using OpenSuSE 11.1.
View 4 Replies
View Related
Feb 5, 2010
I've tried using the "devices->Shared Folders" to create a shared folder but it didn't work. I still couldn't see it from the guest OS (winXP). I also, tried sharing a folder in winXP and then tried adding a network folder in dolphin - also didn't work.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 24, 2010
We have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
View 4 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Feb 22, 2011
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
View 1 Replies
View Related
Aug 19, 2010
I am a big ubuntu fan (9.04) installed,everything went well, installed my network card(s) & the onboard without no problems/installation disc.I have 2 Network interface(s) that I used on windows xP to 'bridge' my connection, because I only have one slot on my router, and the last slot runs into my computer room and from the PC, I run it to the xbox/ps3.No matter what I do, I cannot get ubuntu to share connection
to my other network interface.
View 1 Replies
View Related
Jun 19, 2010
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies
View Related
Apr 4, 2011
I mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies
View Related
Jun 27, 2011
I just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies
View Related
Jan 15, 2010
I've just installed Ubuntu 9.10 and Samba 3.4. I've shared a folder and have accessed the share from a Windows 7 client. However, I've struggled to configure the share and folder so that the Win7 client can create files and/or folders in the share. Kept getting Permission Denied errors. Finally, (using Webmin) I set the permissions on the file folder so that "Other" had write access. I don't understand why this was necessary (and how unsecure this is). I already had the write access checkbox ticked for "User" but it wasn't enough.
View 1 Replies
View Related
Sep 20, 2010
1. I have Ubuntu 10.04.1 installed alongside Windows Home premium 7 on a Compaq CQ5110f with 2 dual processors, 320 GB HDD, 4 gb Ram, less than a year old/ It is giving me some error messages. It is wanting to lock the drive or various programs after being left unused for a few minutes, I have not found where I can disable this. I do not need passwords, really. I am the only user. I reinstalled it once, on top of itself (Ubuntu) and it worked fine briefly, then started doing it all again.
I use to sometimes install Ubuntu as a windows app. on a previous version, maybe 9.04 - 9.10, but think I can not do it on this version?
So, Can I install as WIndows app on this version of Ubuntu? CAn I install Ubuntu on one drive alone, and windows on the other drive alone, install both in same computer and get dual booting? I think before, to do that I had to reset boot drives in BIOS to whichever I had the OS I wanted to use?
Or MUST they be installed on same drive for dual booting to be available?
I am attaching screen shots of the messages I get, etc. I have tried to share files and folders, but it does not allow me to select Share this folder as some security thing is not installed, And the time I am required to enter password to use comp[iter after being idle a few minutes, seems to be tied to my folder, which is JOHN. I may have to think about removing Ubuntu from this drive, add a SATA drive and use two, one for Windows and one for Ubuntu.
View 5 Replies
View Related
